- A powerful but safe formula that makes dirt just disappear!
- Built-in polymers wrap around the carpet fibers to protect them after cleaning
- Concentrated formula dilutable to 3:1 for most interiors
-
-
Optimum Opti-Bond Tire Gel is a thick, water-based formula for use on tires, wheel wells, interior and exterior trim, vinyl, and dashboards. It will produce a durable, high gloss shine that is not greasy or attracts dust. Opti-Bond contains no petroleum distillates which are known to crack rubber and vinyl. It contains advanced UV and ozone protectants to shield surfaces from sun damage and environmental pollution. Rubber and vinyl surfaces will remain supple, flexible and retain their color with regular use of Opti-Bond. Application: Opti-Bond Tire Gel can be applied a couple of ways. You can wipe it on with a foam applicator, just like a traditional tire dressing. The other option is to dilute the gel 1:1 with water and apply it with a spray gun and air compressor. The gun will deliver a fine mist over the tires and wheel wells. This is a great option for professional detailers and garages. Wipe away excess tyre gel with a foam pad or a lint-free towel. Available in 8, 32 or 128 fl. oz. sizes. -
Optimum Wheel and Body Brush is designed to deep clean wheels and tires but due to it's extremely soft flagged bristles it is safe to use on paint as well. Useful for grills, around emblems, door jambs, textured trim and anywhere paint-safe agitation is required. Optimum Wheel and Body Brush works equally well with Optimum Ferrex, Optimum Power Clean, Optimum No Rinse Wash & Shine, Optimum No Rinse Wash & Wax and Optimum Car Wash. -
The New & Improved Optimum Gelcoat Restorer is engineered to return Gelcoat to its original factory finish without the need for polishing. The new formula is easier to apply and levels itself better for faster application times and a more even application. Optimum Gelcoat Restorer ("GCR") rebuilds the Gelcoat keeping the original thickness and restoring the gloss as before while adding additional UV protection to protect from oxidation. Directions: 1. Remove loose oxidation using pure Optimum Power Clean and a brush or mild scuff pad. 2. Rinse the surface thoroughly and dry. 3. Wearing gloves and eye protection, apply GCR to the surface in overlapping circular motions. If the Gelcoat was heavily oxidized, the GCR will soak in. Do not over apply, first coats should be very thin. Use a pearl weave, low nap towel for application. 4. Once dry to the touch (20-30 minutes), apply a second coat. Apply directly onto towel, not on panel. A sprayer can be attached to GCR bottle or product transferred for application. When the applicator begins to drag, add more product. 5. Depending on the level of oxidation, up to 5 coats may be required. Last pass, apply in straight lines. 6. To maintain the restored surface, wash with Optimum No Rinse (ONR) and apply Optimum Car Wax regularly. 7. One bottle of GCR is enough for 4 coats on a 40’ Boat or RV. Gelcoat Hints: • Thin coats and multiple coats (up to 5) • Only use on old/fading gelcoat • Can be applied in bright sunlight. • Sticky/spotty if too much applied • Use DAMP pearl weave towels, low nap, for smoother application. • 2-3 year durability (wax every 6 months) – Absorbs into the gel coat and restores from the inside out. • It’s acrylic based. • To remove streaking, polish with Hyper Polish and orange foam pad (or if necessary, move up to Intensive Polish). There are four major points for best application for GCR: 1. The condition of the Gelcoat – Will GCR work on it or not? Gelcoat Restorer is made for heavily oxidized paint. New Gelcoat isn’t porous as old, oxidized Gelcoat so it won’t accept the product, whether it is clear or colored Gelcoat. 2. Removing this oxidized Gelcoat is essential for the pores to accept the coating, exactly like prepping paint for coating, with concentrated Power Clean and white scuff pad. 3. The amount of product also essential, multiple moderate layers are better than one thick coat, both will streak. After removing the oxidized layer, the Gelcoat will look clean but dull. After 1-3 layers there may not be much gloss. Layers 4-5, the gloss will improve. 4. What you apply with is as important as the amount, a DAMP pearl weave towel or low nap MF applicator is the best way to apply GCR. -
Optimum Premium Extra Large Waffle Weave Microfiber Drying Towel (24" x 36") is a super absorbent, zero lint towel that can easily dry a complete car to a lint free and streak free finish. The microfiber waffle weave material is soft on the surface and won't cause severe swirl marks that are commonly seen with chamois drying cloths. To use a waffle weave drying towel, it is a little different to a chamois. Avoid excessive rubbing, and allow the weight of the cloth to absorb the water as you glide it over the surface. Pat dry where necessary allowing the absorbent material to absorb, rather than wipe away the water. For best results "sheet" excess water from the panels using low water pressure. This will minimize contact required with the surface by removing a majority of the water. Every Optimum microfiber towel is manufactured using the highest quality material to produce the highest quality results. Made from commercial quality microfiber to withstand years of repeated washing and drying. -
Opti-Coat® Protectant Plus cleans, restores and protects leather, vinyl and plastic surfaces leaving a natural satin matte finish. Opti-Coat® Protectant Plus contains a balance of cleaners, penetrating oils and UV inhibitors that retain the original color of these surfaces and protect against sun damage. 16 oz. size -
Opti-Guard Leather creates a hydrophobic coating to protect coated leather and vinyl surfaces from premature aging, cracking and other damage such as color transfer and staining. Opti-Guard Leather is manufactured using a hybrid ceramic and acrylic resins that allows a strong, flexible coating for these softer surfaces with complete protection from UV damage. Opti-Guard Leather is resistant to chemicals providing multi-year protection which is unheard of for leather coatings. It contains special matting agents to maintain the original factory appearance of the surfaces it is applied to. Apply Opti-Guard Leather to leather seats, vinyl dashboards, leather and vinyl trim pieces for complete protection inside and out. Opti-Guard Leather should not be used on Tanned Leather surfaces. Available in 10 cc (enough for 1 car) and 30 cc (enough for 3 cars) syringes. -
Opti-Coat Blue Microsuede Applicator Pads are a thin, miniature suede applicator specifically designed for application of coatings such as Opti-Coat. The smaller design makes them more convenient to handle than bulky applicators. Opti-Coat Blue Microsuede Applicator Pads are useful for numerous other purposes such as application of regular sealants and Optimum Opti-Seal. Applicators measure 12cm x 6cm x 2cm -
Optimum Opti-Clean is the most advanced waterless wash in the marketplace. It is designed to wipe away dirt and grime from automotive paint and other surfaces safely and effectively in a spray and wipe application. Optimum Opti-Clean contains the same proven polymer system that is used in the Optimum No Rinse Wash & Shine as well as additional polymers that add greater lubricity and protection to the paint. Simply spray Optimum Opti-Clean on any surface and wipe off with a plush microfiber towel till the area is clean and dry. Optimum Opti-Clean is available in ready to use 18 oz. size or in 4x concentrate in 32 oz. and gallon sizes. Simply spray Optimum Opti-Clean liberally on the painted surfaces and wipe with a clean plush microfiber towel. The substantive polymers encapsulate the dirt and grime to protect the paint from marring while lubricating and bonding to the painted and other automotive surfaces to provide greater protection while leaving a slick glossy finish behind. -
Opti-Coat® FerreX™ is designed to dissolve and remove ferrous oxides such as brake dust from wheels and industrial fallout from painted surfaces quickly by bonding and dissolving them away with minimal effort. Furthermore, Opti-Coat® FerreX™ will dissolve and remove other surface contaminants such as tar and wax at the same time. -
The Big Gold Sponge is oversized at 7”x 5”x 3” for greater ease of use. The latest in sponge technology, both sides of the sponge are cross cut, creating channels that pull dirt from the paint and reduce marring. Softer than the traditional wash medium, the luxurious foam will hold a great deal of cleaning/lubricating solution allowing larger sections to be safely washed before wringing and reloading the sponge. This high quality Big Gold Sponge will provide years of heavy duty professional use. -
Optimum MDR™ Mineral Deposit Remover is the most advanced cleaner that dissolves and removes mineral deposits and other contaminants from exterior automotive surfaces. It is a non-abrasive chemical cleaner that will dissolve and remove water based contaminants without the need to polish or abrade the surface. Simply wipe Optimum MDR™ on painted or other automotive surfaces to dissolve and remove minerals. A combination of acids and cleaning agents will break down and dissolve these contaminants and make the surface clean and smooth again witout affecting or removing paint! Directions: Pour Optimum MDR™ on a clean microfiber towel or foam applicator. Wipe on the surface and work it in for 30 - 60 seconds. Wipe off the residue and check to see if the surface is clean and free of mineral deposits. Repeat the above steps as required to remove any remaining contaminants. Wash the surface to remove any remaining chemical residue.