• Opti-Coat RV & Marine is a ceramic clear coating with superior resistance to scratching (9H), chemical etching, fading due to UV, and provides outstanding release properties. Opti-Coat RV & Marine pre-polymer cross links and forms a continuous protective film on the painted gel coat surfaces it is applied to, similar to a single component isocyanate that forms a clear coat finish. Opti-Coat RV & Marine has better chemical resistance, scratch & mar resistance, and release properties than any paint coating in use. It provides permanent protection for all modern factory paints and gel coats and can also be used to protect metal and hard plastic surfaces. This is for professional installers and includes (1) 30cc syringe of Opti-Coat RV & Marine. This is not warrantied.    

    Opti-Coat RV & Marine Care Guide

    WASHING For best results, wash with Opti-Coat No Rinse on a monthly basis at a minimum to avoid excessive contamination build up on the surface. Avoid washing your Boat or RV in direct sunlight if possible. Heated panels will cause drying and possibly leave streaks and water spotting on the surface. If this is not an option, then wash and dry one panel at a time for best results. Wash the cleanest panels first. Leave the dirtiest panels for last to avoid cross contamination. Usually this involves starting from the top panels and followed by the lower ones. DRYING Always dry your RV or Boat completely and never allow it to air dry. Tap water contains minerals. When the water evaporates, these minerals are deposited on the surface creating water spots. As the minerals harden with heat, they can be extremely difficult to remove from the surface.  SPOT REMOVAL OF SURFACE CONTAMINATION Never use abrasive products to polish the coating or to remove surface contamination. Never use excessive rubbing or force to remove spot contamination. Surface contamination such as tar and other contaminants should be removed as soon as possible to avoid temporary staining of the coating and/or hardening on the surface requiring professional removal. For assistance with contamination removal or maintenance standards and techniques, contact your Opti-Coat Marine & RV dealer for professional advice.
  • Opti-Coat RV & Marine is a ceramic clear coating warrantied for up to 5 years with superior resistance to scratching (9H), chemical etching, fading due to UV, and provides outstanding release properties. Opti-Coat RV & Marine pre-polymer cross links and forms a continuous protective film on the painted gel coat surfaces it is applied to, similar to a single component isocyanate that forms a clear coat finish. Opti-Coat RV & Marine has better chemical resistance, scratch & mar resistance, and release properties than any paint coating in use. It provides permanent protection for all modern factory paints and gel coats and can also be used to protect metal and hard plastic surfaces. This is the warranty package for professional installers and includes (1) 30cc syringe of Opti-Coat RV & Marine and (1) 17 oz. Optimum Paint Prep. MRP: $100 per linear ft.  

    Opti-Coat RV & Marine Care Guide

    WASHING For best results, wash with Opti-Coat No Rinse on a monthly basis at a minimum to avoid excessive contamination build up on the surface. Avoid washing your Boat or RV in direct sunlight if possible. Heated panels will cause drying and possibly leave streaks and water spotting on the surface. If this is not an option, then wash and dry one panel at a time for best results. Wash the cleanest panels first. Leave the dirtiest panels for last to avoid cross contamination. Usually this involves starting from the top panels and followed by the lower ones. DRYING Always dry your RV or Boat completely and never allow it to air dry. Tap water contains minerals. When the water evaporates, these minerals are deposited on the surface creating water spots. As the minerals harden with heat, they can be extremely difficult to remove from the surface.  SPOT REMOVAL OF SURFACE CONTAMINATION Never use abrasive products to polish the coating or to remove surface contamination. Never use excessive rubbing or force to remove spot contamination. Surface contamination such as tar and other contaminants should be removed as soon as possible to avoid temporary staining of the coating and/or hardening on the surface requiring professional removal. For assistance with contamination removal or maintenance standards and techniques, contact your Opti-Coat Marine & RV dealer for professional advice.   MRP: $100.00 per linear foot
  • Sale!
     

    SALE ! ! !

      The Opti-Coat Shelving Unit is a custom POP display design that gets attention and helps sell your product.  It has been designed and built with top of the line quality and craftsmanship. Perfect for the Opti-Coat Maintenance Line of products, this unit is easy to assemble and comes with full instructions. The display are made of 5/8" engineered wood with a vinyl laminate finish and 1/8" MDF.  Graphics are printed on exterior grade PVC vinyl using solvent based inks.  These materials give long term wear and durability maintaining the look and strength for many years especially in the indoor environment. Hardware included. Dimensions:73" H x 25" W x 16" D Shipping: Upon receipt of your order, we will contact you for the full cost of shipping. This product does not qualify for flat fee shipping. Packaging: 64 x 19 x 4, 62 lbs. per unit.
  • The Opti-Coat Shelving Unit Combo comes with one case of all our Maintenance Line products! Bundled for your savings! The Opti-Coat Shelving Unit is a custom POP display design that gets attention and helps sell your product.  It has been designed and built with top of the line quality and craftsmanship. Perfect for the Opti-Coat Maintenance Line of products, this unit is easy to assemble and comes with full instructions. The display is made of 5/8" engineered wood with a vinyl laminate finish and 1/8" MDF.  Graphics are printed on exterior grade PVC vinyl using solvent based inks.  These materials give long term wear and durability maintaining the look and strength for many years especially in the indoor environment. Hardware included. Combo includes:
    • 1 Opti-Coat Shelving Unit
    • 1 Case - Opti-Coat Fabric Clean & Protect 16oz
    • 1 Case - Opti-Coat Ferrex 16oz
    • 1Case - Opti-Coat Hyper Seal 16oz
    • 1 Case - Opti-Coat MDR 16oz
    • 1 Case - Opti-Coat M-Wash 16oz
    • 1 Case - Opti-Coat No Rinse 16oz
    • 1 Case - Opti-Coat Glass Clean & Protect 16oz
    • 1 Case - Opti-Coat Power Clean 16oz
    • 1 Case - Opti-Coat Protectant Plus 16oz
    • 1 Case - Opti-Coat Tire Gel 16oz
    • 1 Case - The Ultimate Drying Towel
    • 1 Case - Big Gold Sponge
      SAVING YOU $113!   Shelving Unit Dimensions:73" H x 25" W x 16" D Shipping: Upon receipt of your order, we will contact you for the full cost of shipping. This product does not qualify for flat fee shipping.
  • Opti-Coat® Slip Solution is designed to be used with Opti-Coat® Paint Protection Film for The Ultimate™ bonding and ease of installation.  The 4 oz. concentrate makes 8 gallons of Ready to Use Slip Solution. ●    Easy to use. ●    Highly concentrated formula. Use 0.5 oz. per gallon. ●    Environmentally friendly. ●    Contains no petroleum based products. ●    No lotions, wax or additives. ●    Eliminates the need for alcohol. ●    Allows time to adhere. DIRECTIONS Use on a cool car, preferably in a controlled environment. 1.    Mix 0.5 Slip Solution concentrate into 1 gallon of distilled or tap water. 2.    Spray diluted Slip Solution liberally on the surface of vehicle and on the Opti-Coat® PPF. 3.    Keep the film lubricated during installation. 4.    If you need to reposition the film, apply Slip Solution liberally to keep the vehicle surface and film fully lubricated. KEEP FROM FREEZING
  • Opti-Coat T-Shirt

    $17.99$19.99
    Optimum Opti-Coat Pro T-Shirt is made of 100% cotton and comes in black with the Opti-Coat Pro logo on front and back. Available in Small, Medium, Large, X-Large & XX-Large
  • Opti-Coat® Tire Gel is a water-based VOC free tire dressing with high gloss and excellent durability. It can be used to protect and dress tires, wheel wells, interior and exterior plastic trim wherever a high gloss finish is desired. Opti-Coat® Tire Gel also protects these surfaces from ozone, UV and oxidation. 16 oz. size
  • Opti-Coat® Fabric Clean & Protect cleans away grease stains and spills from fabric and carpet surfaces while leaving behind a polymetric protectant to maintain your Opti-Guard Protection. Opti-Coat® Fabric Clean & Protect contains substantive polymers that trap and remove dirt and grime while bonding to the fabric to protect the surface from contaminants. 
    • A powerful cleaner that is also safe for carpet
    • Has built-in polymers that provide protection afterward
    • No diluting necessary
      Directions: Vacuum floor matt to get out loose dirt. Spray Opti-Coat Fabric Clean & Protect onto carpet liberally and brush. If using a carpet extractor or steamer proceed to steam or extract carpet. Vacuum after and let dry totally.   Orders in case quantity will be responsible for full cost of shipping and are not eligible for flat fee shipping. We will contact you with the full cost once the order has been placed.        
  • Opti-Coat® Hyper™ Seal is The Ultimate™ maintenance solution to help prevent bonding of contamination such as hard water deposits, bug splatter and other airborne contamination.  Opti-Coat® Hyper™ Seal creates a super slick surface for easy cleaning in high pollution environments. Use Opti-Coat® Hyper™ Seal on wet surfaces as a drying aid after washing or apply to dry surfaces including paint, plastic moldings, rubber seals and glass.   The new formula is longer lasting and can last a year or more!     Orders in case quantity will be responsible for full cost of shipping and are not eligible for flat fee shipping. We will contact you with the full cost once the order has been placed.  
  • NEW & IMPROVED Opti-Glass Pro Coating is designed to chemically bond to silica based surfaces to form a hydrophobic film that provides long term protection to glass and other silica based surfaces. Opti-Glass Pro promotes safety by increasing visibility during inclement weather driving. additionally, it will increase chip resistance, scratch and mar resistance and protect from water staining. For increased durability, clean your glass with Opti-Coat Opti-Glass Clean & Protect on a monthly basis. 60cc
  • Opti-Guard Fabric creates a stain resistant coating to protect fabric seats, carpets and other textile surfaces. When liquids come in contact with Opti-Guard Fabric, the surface repels the substance without penetrating or staining the material. Opti-Guard Fabric forms a strong bond with the fibers to prevent removal during cleaning. This is the Opti-Guard Fabric Warranty Pack with Opti-Guard Leather for professional application and includes the warranty. Opti-Guard Leather should not be used on Tanned Leather surfaces. MRP: $599.00
  • Opti-Guard Interior Coatings Banner printed on heavy vinyl stock, 32" x 78" with pull-up display stand.
Go to Top