-
Optimum Opti-Lens Coating is the most advanced polymer system that is specifically designed for the protection of headlight lenses. This hybrid resin is a combination of Opti-Coat ceramic resin and an acrylic resin for maximum bonding and protection of acrylic and polycarbonate lenses. Additionally Optimum Opti-Lens Coating contains high levels of UV absorbers to minimize discoloration and fading of automotive headlight lenses. Optimum Opti-Lens Coating is highly concentrated. Once applied, Optimum Opti-Lens Coating will form a permanent bond to the surface and can only be removed by polishing or paint removers. 30 cc Directions: 1. Clean headlights with 15% IPA solution to remove any oils, waxes, or sealants. 2. Remove all the oxidation by sanding and then polishing the headlights with Optimum Polish II or Optimum Hyper Polish. 3. Wipe down the entire lens with a clean damp microfiber towel to remove any polishing residue. 4. Prime the applicator pad by making an X pattern across the pad. Only a few drops will be needed per headlight lens. 5. Wipe Optimum Opti-Lens Coating on the headlight lens in a circular or back and forth direction. 6. Within 5 minutes, inspect the headlight with adequate lighting looking for any thick areas that have not flashed away to clear. 7. Use the foam applicator or an Optimum Multi-Surface Microfiber Towel to wipe down and remove any excess. (Previous product code was OLC2013-30) -
- Perfect accessory for your pressure washer to produce thick foam
- Comes with all necessary hardware
- Works perfectly with Opticoat Mwash, Optimum Car Wash, Power Clean or Ferrex
-
Optimum Hyper Polish is the first and only sprayable polish in the marketplace. By spraying the polish onto a buffing pad, you can effectively prime the entire pad with a minimal amount of product. Therefore you are using the entire pad to polish the paint and achieve better results in less time than a conventional polish. Just like all Optimum polishes, Optimum Hyper Polish is extremely easy to use and has a long working time with no dusting or sling issues. Its spray application minimizes the chance of overloading or gumming up the pad, and it provides an even application. Optimum Hyper Polish easily wipes off with a damp Optimum No Rinse microfiber towel, whether you use it in the sun or shade, to achieve outstanding results. Optimum Hyper Polish is VOC compliant and body shop safe. It can be used with any type of buffing pad or buffing machine. It acts as a light compound with a cutting pad and as a finishing polish with a finishing pad. It works quickly to remove (not hide) swirl marks, scratches, and other blemishes, while creating a perfect shine on all types of paint. Optimum Hyper Polish has excellent workability on painted surfaces and will not clog buffing pads. Aggressive enough for paint correction and swirl removal, yet the shine, clarity, and gloss of the paint left behind requires only final protection. -
NEW & IMPROVED Opti-Glass Pro Coating is designed to chemically bond to silica based surfaces to form a hydrophobic film that provides long term protection to glass and other silica based surfaces. Opti-Glass Pro promotes safety by increasing visibility during inclement weather driving. additionally, it will increase chip resistance, scratch and mar resistance and protect from water staining. For increased durability, clean your glass with Opti-Coat Opti-Glass Clean & Protect on a monthly basis. 60cc -
NEW FORMULA The new Optimum Gloss-Coat™ has added Ceramic polymers and is the most advanced polymer system that forms a layer of clear coat over automotive finishes. The new Optimum Gloss-Coat™ provides better scratch and mar resistance, better UV resistance, better chemical etch resistance, and has better release properties than any other consumer Ceramic product while providing unsurpassed gloss and slickness. Additionally, you can top the new Optimum Gloss-Coat™ with any non-abrasive wax or sealant of your choice to add additional gloss and slickness. Optimum Gloss-Coat™ can be used to protect the following surfaces: • painted surfaces • wheels • plastic trim • bumpers • aluminum & chrome surfaces Since Optimum Gloss-Coat™ bonds to surfaces it is applied to, any paint imperfections must be removed with Optimum Hyper Polish before application. Also, all waxes and oils must be removed from the surfaces for proper bonding. Not recommended for glass. -
The Optimum Air Foamer is used with compressed air to create a thick luxurious foam from many of your favorite Optimum products.- Optimum Ferrex
- Optimum No Rinse
- Optimum Car Wash
- Opti-Coat M-Wash
-
The New & Improved Opti-Guard Fabric creates a more stain resistant and water repellent coating to protect fabric seats, carpets, and other textile surfaces. When liquids come in contact with Opti-Guard Fabric, the surface repels the substance without penetrating or staining the material. The New & Improved Opti-Guard Fabric forms a strong bond with the fibers to prevent removal during cleaning. This is the Opti-Guard Fabric stand-alone product for professional application and does not include a warranty. -
Optimum Opti-Glass Coating is designed to chemically bond to silica based surfaces such as automotive glass and provide long term water repellency and improve resistance against scratching and rock chips for up to one year. Use the Optimum Glass Clean & Protect for subsequent cleaning to increase the longevity of Optimum Opti-Glass Coating indefinitely. Optimum Opti-Glass Coating is highly concentrated and one bottle is enough to cover 20-30 windshields. The improved visibility and the increased chip resistance that Optimum Opti-Glass Coating provides will make driving safer and more enjoyable. Additionally Optimum Opti-Glass Coating will prevent ice or snow from bonding to the glass surfaces. For best results before applying Optimum Opti-Glass Coating make sure the surface of glass is clean and free of any contaminants. Directions: Apply when the temperature is between 60°-90° F (15°-30°C). Do not apply in direct sunlight. 1. Polish glass as needed with Optimum Polish II or Opti-Eraser to remove any bonded contaminants. 2. Wipe down the surface with 15% Isopropanol (Rubbing Alcohol) solution to remove any oils or sealers. 3. Apply an even amount of Optimum Opti-Glass Coating to an applicator pad. 4. Wipe Optimum Opti-Glass Coating onto one half of the windshield at a time in a circular manner. 5. Allow Optimum Opti-Glass Coating to dry for 2 minutes and then wipe off the excess. If you do not remove the excess coating, it will harden and will require polishing to remove it. (Net: 60 CC) -
Glaze, Polish, & Seal with Optimum GPS™ All-in-One Optimum GPS™ is the most remarkable, all-in-one product ever produced in a spray form! This zero dusting, buttery-smooth formula is the ultimate, one-step product. It creates gloss and long term protection that is second to none. Optimum GPS™ contains micro abrasives that eliminate (not hide) minor surface imperfections. It provides swirl mark removal, the final polish and a durable wax/sealant…all in one step! The spray application makes priming the pad very easy and reduces product usage. GPS™ creates a perfect shine on all types of paint, fiberglass, gel coat and smooth molded plastic. A single application provides "optimum" protection for your vehicle that lasts for months! Directions for use: Hand Application: Spray on a small area and wipe in with a dampened foam or cloth applicator. After slight hazing occurs, wipe-off with a microfiber or terry towel for a perfect shine. Machine Application: Apply with orbital or rotary polisher and appropriate pad for the job. Spray once to prime the pad and one spray per panel to create a lubricating barrier between the buffing pad and the surface. Work across the area until product disappears. (We suggest 1000-1400 rpms for rotary polishers). Wipe with a lightly misted cotton towel for a steak-free, perfect finish. For deeper surface imperfections, use Optimum Polish or Optimum Compound prior to GPS. -
Optimum Opti-Bond Tire Gel is a thick, water-based formula for use on tires, wheel wells, interior and exterior trim, vinyl, and dashboards. It will produce a durable, high gloss shine that is not greasy or attracts dust. Opti-Bond contains no petroleum distillates which are known to crack rubber and vinyl. It contains advanced UV and ozone protectants to shield surfaces from sun damage and environmental pollution. Rubber and vinyl surfaces will remain supple, flexible and retain their color with regular use of Opti-Bond. Application: Opti-Bond Tire Gel can be applied a couple of ways. You can wipe it on with a foam applicator, just like a traditional tire dressing. The other option is to dilute the gel 1:1 with water and apply it with a spray gun and air compressor. The gun will deliver a fine mist over the tires and wheel wells. This is a great option for professional detailers and garages. Wipe away excess tyre gel with a foam pad or a lint-free towel. Available in 8, 32 or 128 fl. oz. sizes. -
Optimum Opti-Trim™ Protect is a clear hybrid resin coating designed to prevent plastic trim from UV damage. Opti-Trim Protect contains a high level of UV absorbers to help prevent fading of plastic trim and maintain the factory appearance. Opti-Trim Protect also contains special dye additives to restore faded and oxidized trim back to a like-new factory appearance. Additionally, Opti-Trim Protect helps prevent future fading and provides long term protection. -
Optimum Opti-Lens Coating is the most advanced polymer system that is specifically designed for the protection of headlight lenses. This hybrid resin is a combination of Opti-Coat 2.0 ceramic resin and an acrylic resin for maximum bonding and protection of acrylic and polycarbonate lenses. Additionally Optimum Opti-Lens Coating contains high levels of UV absorbers to minimize discoloration and fading of automotive headlight lenses. Optimum Opti-Lens Coating is highly concentrated and one tube is enough to cover 5-6 sets of headlights. Once applied, Optimum Opti-Lens Coating will form a permanent bond to the surface and can only be removed by polishing or paint removers. Directions: 1. Clean headlights with 15% IPA solution to remove any oils, waxes, or sealants. 2. Remove all the oxidation by sanding and then polishing the headlights with Optimum Polish II or Optimum Hyper Polish. 3. Wipe down the entire lens with a clean damp microfiber towel to remove any polishing residue. 4. Prime the applicator pad by making an X pattern across the pad. Only a few drops will be needed per headlight lens. 5. Wipe Optimum Opti-Lens Coating on the headlight lens in a circular or back and forth direction. 6. Within 5 minutes, inspect the headlight with adequate lighting looking for any thick areas that have not flashed away to clear. 7. Use the foam applicator or an Optimum Multi-Surface Microfiber Towel to wipe down and remove any excess.