-
Optimum Wheel and Body Brush is designed to deep clean wheels and tires but due to it's extremely soft flagged bristles it is safe to use on paint as well. Useful for grills, around emblems, door jambs, textured trim and anywhere paint-safe agitation is required. Optimum Wheel and Body Brush works equally well with Optimum Ferrex, Optimum Power Clean, Optimum No Rinse Wash & Shine, Optimum No Rinse Wash & Wax and Optimum Car Wash. -
Opti-Coat® Glass Clean & Protect is designed to clean and boost your Opti-Glass™ Pro Coating with a simple wipe on, wipe off application. It will clean glass surfaces without streaking while the polymers will bond to glass surfaces and continue to add protection every time you use this product. Use it by itself or in combination with your Opti-Glass™ Pro Coating for maximum hydrophobicity and durability. 16 oz. size -
Zentool Backing Plates are designed to work specifically with Zentool 21mm DA Polishers.. Additionally they are perforated to allow air to circulate through the Optimum Foam and Wool Pads and through the polisher. This air movement will keep paint, pad, and polisher cooler which will improve the performance and the results. Additionally the lower temperatures will make your polisher and pads last longer and prevent paint from being damaged due to excessive heat and shear. Zentool Backing Plates are available for both old and new model Zentool 21mm DA Polishers. Please order by size and polisher model number. -
Optimum Opti-Coat Pro T-Shirt is made of 100% cotton and comes in black with the Opti-Coat Pro logo on front and back. Available in Small, Medium, Large, X-Large & XX-Large -
Glaze, Polish, & Seal with Optimum GPS™ All-in-One Optimum GPS™ is the most remarkable, all-in-one product ever produced in a spray form! This zero dusting, buttery-smooth formula is the ultimate, one-step product. It creates gloss and long term protection that is second to none. Optimum GPS™ contains micro abrasives that eliminate (not hide) minor surface imperfections. It provides swirl mark removal, the final polish and a durable wax/sealant…all in one step! The spray application makes priming the pad very easy and reduces product usage. GPS™ creates a perfect shine on all types of paint, fiberglass, gel coat and smooth molded plastic. A single application provides "optimum" protection for your vehicle that lasts for months! Directions for use: Hand Application: Spray on a small area and wipe in with a dampened foam or cloth applicator. After slight hazing occurs, wipe-off with a microfiber or terry towel for a perfect shine. Machine Application: Apply with orbital or rotary polisher and appropriate pad for the job. Spray once to prime the pad and one spray per panel to create a lubricating barrier between the buffing pad and the surface. Work across the area until product disappears. (We suggest 1000-1400 rpms for rotary polishers). Wipe with a lightly misted cotton towel for a steak-free, perfect finish. For deeper surface imperfections, use Optimum Polish or Optimum Compound prior to GPS. -
Optimum Metal Polish is the most effective and easy to use metal polish you will ever use! It can be used to remove oxidation, scratches, and swirl marks from all metal surfaces leaving a mirror shine. Optimum Metal Polish also leaves a protective coating to protect metal surfaces from oxidation. Optimum Metal Polish can be used by hand or with buffing machines on any metal surface. The sub-micron polishing agents and chemical cleaners work quickly to remove oxidation, scratches, and swirl marks quickly to create a flawless mirror shine. -
The New & Improved Optimum Tire Protection and Coating is a long-lasting water based tire shine and protectant that is now easier to apply and has better self-leveling properties. One application will last for several months and continues to protect tires from oxidation and aging. Optimum Tire Protection and Coating is silicone free and does not leave an oily film behind and is also paint and body shop safe. DIRECTIONS: Always wear gloves and eye protection. 1. Clean the tire with Optimum Power Clean. Rinse and thoroughly dry. If the surface looks blotchy, clean it a second time. 2. Apply Tire Protection and Coating to the surface evenly, working it into the surface. When first applied it will have a blue tint, it will dry to black. 3. For a glossier appearance apply a second coat after 30-60 minutes. Allow 4 hours to dry before getting wet. -
The latest in sponge technology, the Big Red Sponge is oversized at 7”x 5”x 3” for greater ease of use. Both sides of the sponge are cross cut, creating channels that pull dirt from the paint and reduce marring. The porous foam will hold a great deal of cleaning/lubricating solution allowing larger sections to be safely washed before wringing and reloading the sponge. This high quality Big Red Sponge will provide years of heavy duty professional use. Maintenance Instructions: After use, rinse the Big Red Sponge in hot water and Optimum Power Clean (or dish detergent), squeezing until it stops foaming. Then allow to dry and it's ready for the next wash. -
Opti-Coat® M-Wash™ is designed to clean the toughest automotive grime. With regular use, the added fluoropolymers will repel airborne heavy metal pollution and maintain the coated surface free of bonded contamination. The rich foaming lather traps dirt and grime and rinses with cold water leaving a smooth, clean surface behind. 16 oz. size -
Opti-Coat® Power Clean™ is The Ultimate™ multi-surface cleaner for any cleaning application! Opti-Coat® Power Clean™ is a revolutionary product that is formulated utilizing special polymers and emulsifiers to safely clean all automotive surfaces. It is environmentally friendly, safe for the user, and can be diluted to suit any cleaning job. Use it at full strength for the toughest dirt and grime, or dilute anywhere from 3 parts water to 1 part Power Clean to as much as 10:1. 16 oz. size -
Opti-Coat® Protectant Plus cleans, restores and protects leather, vinyl and plastic surfaces leaving a natural satin matte finish. Opti-Coat® Protectant Plus contains a balance of cleaners, penetrating oils and UV inhibitors that retain the original color of these surfaces and protect against sun damage. 16 oz. size -
Optimum's Hyper Wool Rotary Pad is designed for maximum cutting and user comfort. With its integrated foam interface, the Hyper Wool Rotary Pad allows the 1 1/4" thick 4 ply tufted wool cutting surface to conform better to contours and run cooler. The unique integrated interface of the Hyper Wool Rotary Pad also makes for a better user experience with reduced vibration and precision control. Available in both 6 and 8-inch diameters with a centering hole the Hyper Wool Rotary Pad will quickly become your go-to rotary cutting pad. -
Optimum FerreX™ is designed to dissolve and remove ferrous oxides from wheels and painted surfaces quickly by bonding and dissolving them away with minimal effort. Furthermore, Optimum FerreX™ will dissolve and remove other surface contaminants such as tar and wax at the same time. Directions for wheels: Avoid using on hot surfaces. Wash wheels to remove excess contaminants. Spray Optimum FerreX™ directly on wheels and allow 1 - 2 minutes to fully dissolve ferrous oxides. Agitate with a soft bristle brush as needed. Rinse off with plenty of water. Directions for painted surfaces: Wash with Optimum No Rinse™ Wash & Shine or Optimum Car Wash before applying Optimum FerreX™. Use on a cool surface and out of direct sunlight. Spray Optimum FerreX™ directly on painted surface and allow 1 - 2 minutes to fully dissolve ferrous oxide. Agitate with a microfiber towel or soft sponge if necessary. Rinse off with plenty of water. -
Opti-Coat® Tire Gel is a water-based VOC free tire dressing with high gloss and excellent durability. It can be used to protect and dress tires, wheel wells, interior and exterior plastic trim wherever a high gloss finish is desired. Opti-Coat® Tire Gel also protects these surfaces from ozone, UV and oxidation. 16 oz. size -
Opti-Coat® Fabric Clean & Protect cleans away grease stains and spills from fabric and carpet surfaces while leaving behind a polymetric protectant to maintain your Opti-Guard Protection. Opti-Coat® Fabric Clean & Protect contains substantive polymers that trap and remove dirt and grime while bonding to the fabric to protect the surface from contaminants.- A powerful cleaner that is also safe for carpet
- Has built-in polymers that provide protection afterward
- No diluting necessary
-
Opti-Coat® MDR (Mineral Deposit Remover) is the most advanced cleaner that dissolves and removes mineral deposits and other contaminants from exterior automotive surfaces. It is a non-abrasive chemical cleaner that will dissolve and remove water based contaminants without the need to polish or abrade the surface. 16 oz. size -
Opti-Coat® No Rinse is the fastest, easiest and the most environmentally friendly way to wash any vehicle. Its proprietary polymers bond to the vehicle surfaces and trap dirt to clean without rinsing and leave a very slick and glossy finish that is mar-free. Properly used, you will not scratch the vehicle surface. Washing with Opti-Coat® No Rinse greatly reduces the discharge of pollutants into storm drains, sewers and ground water. Opti-Coat® No Rinse helps both commercial and individual users comply with the discharge guidelines established by the Clean Water Act and the Environmental Protection Agency. 16 oz. size -
Opti-Coat PPF Brochures are available in packs of 100 each. -
BUY ONE, GET ONE FREE. PUT ONE IN YOUR CART AND WE WILL SEND AN EXTRA IN YOUR ORDER.
You do not need to put two in your cart.
Optimum Hyper™ Compound is the first and only spray compound in the marketplace that can remove 1,000 grit and deep scratches in seconds while creating a great finish. Optimum Hyper™ Compound was designed for professional detailers and auto body shops to cut through wet sanding marks and deep scratches in one or two passes. Optimum Hyper™ Compound offers all the advantages of Optimum line of polishes with long working time and low to no dusting.
The spray on application provides ease of use and reduces the amount of product needed to a fraction of the traditional products. 2-3 sprays is enough to cover the entire pad making the whole pad do the cutting and eliminating dry buffing. The minor swirls left after using Optimum Hyper™ Compound can easily be removed with the Optimum™ Hyper Polish. Optimum Hyper™ Compound has a long working time to allow complete paint correction with one application. The residue is easily wiped off with a dry or damp microfiber towel. Optimum Hyper™ Compound contains no silicone oils or wax, so it is completely body shop safe.
Optimum Hyper™ Compound can be used at any speed on your polisher with a wool or foam pad. When using a wool buffing pad, the compound will remove 1000 grit sand scratches and lighter using an Optimum Hyper™Wool Foam Pad with Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. Faster buffing speed is not needed with this product. When using a medium or heavy cut foam pad, the compound will remove 2,000 sand scratches and lighter with Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. The compound works more or less aggressively depending on the pad you choose.
Directions:
To remove 1,000 grit or finer sanding marks spray Optimum Hyper™ Compound on the Optimum Hyper™Wool Foam Pad using Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. To remove lighter scratches and swirl marks, spray Optimum Hyper™ Compound on an orange waffle or black waffle foam pad using Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM.
1. Shake Well.
2. Use 2-3 sprays initially to prime the pad. After the initial priming, use two sprays per panel. There is no need to apply additional product since Optimum Hyper™ Compound has a long working time and will continue on working to remove the scratches.
3. Use light to medium pressure on the buffer until desired results are achieved.
4. Wipe off residue with a dampened microfiber towel. Follow up with Optimum Hyper Polish to refine the paint surface before applying Optimum Car Wax. -
Optimum Hyper Polish is the first and only sprayable polish in the marketplace. By spraying the polish onto a buffing pad, you can effectively prime the entire pad with a minimal amount of product. Therefore you are using the entire pad to polish the paint and achieve better results in less time than a conventional polish. Just like all Optimum polishes, Optimum Hyper Polish is extremely easy to use and has a long working time with no dusting or sling issues. Its spray application minimizes the chance of overloading or gumming up the pad, and it provides an even application. Optimum Hyper Polish easily wipes off with a damp Optimum No Rinse microfiber towel, whether you use it in the sun or shade, to achieve outstanding results. Optimum Hyper Polish is VOC compliant and body shop safe. It can be used with any type of buffing pad or buffing machine. It acts as a light compound with a cutting pad and as a finishing polish with a finishing pad. It works quickly to remove (not hide) swirl marks, scratches, and other blemishes, while creating a perfect shine on all types of paint. Optimum Hyper Polish has excellent workability on painted surfaces and will not clog buffing pads. Aggressive enough for paint correction and swirl removal, yet the shine, clarity, and gloss of the paint left behind requires only final protection. -
Optimum Intensive Polish is a fast cutting polish that leaves a great finish in one step in most cases. It works as a compound with a wool pad that removes 2,000 grit or lighter wet sanding marks, and a medium polish with a polishing pad that can finish in one step. Just like all Optimum polishes, Optimum Intensive Polish is extremely easy to use and has a long working time with no dusting or sling issues. Its spray application minimizes the chance of overloading or gumming up the pad, and it provides an even application. Optimum Intensive Polish easily wipes off with a damp microfiber towel, whether you use it in the sun or shade, to achieve outstanding results. Optimum Intensive Polish works quickly to remove (not hide) swirl marks, scratches, and other blemishes, while creating a perfect shine on all types of paint. By spraying the polish onto a buffing pad, you can effectively prime the entire pad with minimal amount of product. Therefore you are using the entire pad to polish the paint and achieve better results in less time than a conventional polish. Optimum Intensive Polish has excellent workability on painted surfaces and will not clog buffing pads. Aggressive enough for paint correction and swirl removal, yet the shine, clarity, and gloss of the paint left behind requires only final protection in most cases. Directions: To remove 2,000 grit or finer sanding marks spray Optimum Intensive Polish on the Optimum Wool Pad using Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. To remove lighter scratches and swirl marks, spray Optimum Intensive Polish on the orange waffle or black waffle foam pad using Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. 1. Shake Well. 2. Use 2-3 sprays initially to prime the pad. After the initial priming, use only two sprays per panel. There is no need to apply additional product since Optimum Intensive Polish has a long working time and will continue on working to remove the scratches. 3. Use light to medium pressure on the buffer until desired results are achieved. 4. Wipe off residue with a dampened microfiber towel. 5. On softer clears, follow up with Optimum Hyper Polish to refine the paint surface before applying Optimum Car Wax. Optimum Intensive Polish is bodyshop safe and meets all VOC regulations. -
Optimum Two-Piece Applicator comes with twenty (20) micro suede pads for applying coatings and sealants in those hard to cover corners and around raised emblems, etc. Perfect for Optimum Gloss-Coat, Opti-Seal and Opti-Coat Pro. Packages of twenty (20) extra micro suede pads are also available here.
