-
Optimum Opti-Bond Tire Gel is a thick, water-based formula for use on tires, wheel wells, interior and exterior trim, vinyl, and dashboards. It will produce a durable, high gloss shine that is not greasy or attracts dust. Opti-Bond contains no petroleum distillates which are known to crack rubber and vinyl. It contains advanced UV and ozone protectants to shield surfaces from sun damage and environmental pollution. Rubber and vinyl surfaces will remain supple, flexible and retain their color with regular use of Opti-Bond. Application: Opti-Bond Tire Gel can be applied a couple of ways. You can wipe it on with a foam applicator, just like a traditional tire dressing. The other option is to dilute the gel 1:1 with water and apply it with a spray gun and air compressor. The gun will deliver a fine mist over the tires and wheel wells. This is a great option for professional detailers and garages. Wipe away excess tyre gel with a foam pad or a lint-free towel. Available in 8, 32 or 128 fl. oz. sizes. -
- A powerful but safe formula that makes dirt just disappear!
- Built-in polymers wrap around the carpet fibers to protect them after cleaning
- Concentrated formula dilutable to 3:1 for most interiors
-
The New & Improved Optimum Gelcoat Restorer is engineered to return Gelcoat to its original factory finish without the need for polishing. The new formula is easier to apply and levels itself better for faster application times and a more even application. Optimum Gelcoat Restorer ("GCR") rebuilds the Gelcoat keeping the original thickness and restoring the gloss as before while adding additional UV protection to protect from oxidation. Directions: 1. Remove loose oxidation using pure Optimum Power Clean and a brush or mild scuff pad. 2. Rinse the surface thoroughly and dry. 3. Wearing gloves and eye protection, apply GCR to the surface in overlapping circular motions. If the Gelcoat was heavily oxidized, the GCR will soak in. Do not over apply, first coats should be very thin. Use a pearl weave, low nap towel for application. 4. Once dry to the touch (20-30 minutes), apply a second coat. Apply directly onto towel, not on panel. A sprayer can be attached to GCR bottle or product transferred for application. When the applicator begins to drag, add more product. 5. Depending on the level of oxidation, up to 5 coats may be required. Last pass, apply in straight lines. 6. To maintain the restored surface, wash with Optimum No Rinse (ONR) and apply Optimum Car Wax regularly. 7. One bottle of GCR is enough for 4 coats on a 40’ Boat or RV. Gelcoat Hints: • Thin coats and multiple coats (up to 5) • Only use on old/fading gelcoat • Can be applied in bright sunlight. • Sticky/spotty if too much applied • Use DAMP pearl weave towels, low nap, for smoother application. • 2-3 year durability (wax every 6 months) – Absorbs into the gel coat and restores from the inside out. • It’s acrylic based. • To remove streaking, polish with Hyper Polish and orange foam pad (or if necessary, move up to Intensive Polish). There are four major points for best application for GCR: 1. The condition of the Gelcoat – Will GCR work on it or not? Gelcoat Restorer is made for heavily oxidized paint. New Gelcoat isn’t porous as old, oxidized Gelcoat so it won’t accept the product, whether it is clear or colored Gelcoat. 2. Removing this oxidized Gelcoat is essential for the pores to accept the coating, exactly like prepping paint for coating, with concentrated Power Clean and white scuff pad. 3. The amount of product also essential, multiple moderate layers are better than one thick coat, both will streak. After removing the oxidized layer, the Gelcoat will look clean but dull. After 1-3 layers there may not be much gloss. Layers 4-5, the gloss will improve. 4. What you apply with is as important as the amount, a DAMP pearl weave towel or low nap MF applicator is the best way to apply GCR. -
Optimum Wheel and Body Brush is designed to deep clean wheels and tires but due to it's extremely soft flagged bristles it is safe to use on paint as well. Useful for grills, around emblems, door jambs, textured trim and anywhere paint-safe agitation is required. Optimum Wheel and Body Brush works equally well with Optimum Ferrex, Optimum Power Clean, Optimum No Rinse Wash & Shine, Optimum No Rinse Wash & Wax and Optimum Car Wash. -
Optimum Premium Extra Large Waffle Weave Microfiber Drying Towel (24" x 36") is a super absorbent, zero lint towel that can easily dry a complete car to a lint free and streak free finish. The microfiber waffle weave material is soft on the surface and won't cause severe swirl marks that are commonly seen with chamois drying cloths. To use a waffle weave drying towel, it is a little different to a chamois. Avoid excessive rubbing, and allow the weight of the cloth to absorb the water as you glide it over the surface. Pat dry where necessary allowing the absorbent material to absorb, rather than wipe away the water. For best results "sheet" excess water from the panels using low water pressure. This will minimize contact required with the surface by removing a majority of the water. Every Optimum microfiber towel is manufactured using the highest quality material to produce the highest quality results. Made from commercial quality microfiber to withstand years of repeated washing and drying. -
Opti-Coat® Protectant Plus cleans, restores and protects leather, vinyl and plastic surfaces leaving a natural satin matte finish. Opti-Coat® Protectant Plus contains a balance of cleaners, penetrating oils and UV inhibitors that retain the original color of these surfaces and protect against sun damage. 16 oz. size -
Opti-Guard Leather creates a hydrophobic coating to protect coated leather and vinyl surfaces from premature aging, cracking and other damage such as color transfer and staining. Opti-Guard Leather is manufactured using a hybrid ceramic and acrylic resins that allows a strong, flexible coating for these softer surfaces with complete protection from UV damage. Opti-Guard Leather is resistant to chemicals providing multi-year protection which is unheard of for leather coatings. It contains special matting agents to maintain the original factory appearance of the surfaces it is applied to. Apply Opti-Guard Leather to leather seats, vinyl dashboards, leather and vinyl trim pieces for complete protection inside and out. Opti-Guard Leather should not be used on Tanned Leather surfaces. Available in 10 cc (enough for 1 car) and 30 cc (enough for 3 cars) syringes. -
Opti-Coat Blue Microsuede Applicator Pads are a thin, miniature suede applicator specifically designed for application of coatings such as Opti-Coat. The smaller design makes them more convenient to handle than bulky applicators. Opti-Coat Blue Microsuede Applicator Pads are useful for numerous other purposes such as application of regular sealants and Optimum Opti-Seal. Applicators measure 12cm x 6cm x 2cm -
Optimum Opti-Clean is the most advanced waterless wash in the marketplace. It is designed to wipe away dirt and grime from automotive paint and other surfaces safely and effectively in a spray and wipe application. Optimum Opti-Clean contains the same proven polymer system that is used in the Optimum No Rinse Wash & Shine as well as additional polymers that add greater lubricity and protection to the paint. Simply spray Optimum Opti-Clean on any surface and wipe off with a plush microfiber towel till the area is clean and dry. Optimum Opti-Clean is available in ready to use 18 oz. size or in 4x concentrate in 32 oz. and gallon sizes. Simply spray Optimum Opti-Clean liberally on the painted surfaces and wipe with a clean plush microfiber towel. The substantive polymers encapsulate the dirt and grime to protect the paint from marring while lubricating and bonding to the painted and other automotive surfaces to provide greater protection while leaving a slick glossy finish behind. -
Opti-Coat® FerreX™ is designed to dissolve and remove ferrous oxides such as brake dust from wheels and industrial fallout from painted surfaces quickly by bonding and dissolving them away with minimal effort. Furthermore, Opti-Coat® FerreX™ will dissolve and remove other surface contaminants such as tar and wax at the same time. -
The Big Gold Sponge is oversized at 7”x 5”x 3” for greater ease of use. The latest in sponge technology, both sides of the sponge are cross cut, creating channels that pull dirt from the paint and reduce marring. Softer than the traditional wash medium, the luxurious foam will hold a great deal of cleaning/lubricating solution allowing larger sections to be safely washed before wringing and reloading the sponge. This high quality Big Gold Sponge will provide years of heavy duty professional use. -
Optimum MDR™ Mineral Deposit Remover is the most advanced cleaner that dissolves and removes mineral deposits and other contaminants from exterior automotive surfaces. It is a non-abrasive chemical cleaner that will dissolve and remove water based contaminants without the need to polish or abrade the surface. Simply wipe Optimum MDR™ on painted or other automotive surfaces to dissolve and remove minerals. A combination of acids and cleaning agents will break down and dissolve these contaminants and make the surface clean and smooth again witout affecting or removing paint! Directions: Pour Optimum MDR™ on a clean microfiber towel or foam applicator. Wipe on the surface and work it in for 30 - 60 seconds. Wipe off the residue and check to see if the surface is clean and free of mineral deposits. Repeat the above steps as required to remove any remaining contaminants. Wash the surface to remove any remaining chemical residue. -
The Grit Guard Insert is solvent resistant and durable. It stands 2 ½” off the bottom of the bucket and measures 10 3/8” diameter, perfect for any 12” diameter bucket. The Grit Guard Insert takes the grit out of your mitt for safer, swirl-free washing. This inexpensive item can save you countless hours and dollars spent removing swirls. Available in Black, Blue, Gray, Red, White, and Yellow -
- Ready to use formula! Just spray on, wipe off and enjoy!
- Both a cleaner and a protectant. Will provide water repellancy properties after using
- Can be used to boost Optimum Glass Coating
- Not for use on interior glass
-
Optimum Tire Shine is a water-based, solvent-free, and VOC free formula that provides great shine to tires and vinyl surfaces. While Optimum Tire Shine can be easily sprayed, it has great cling to keep it on the tires. When applied properly, it provides great gloss for tires that lasts a few weeks with no slinging issues. Tire manufacturers recommend against solvent-based tire dressings since solvents can penetrate the tire and leach out and remove its protective UV and ozone components. This will cause yellowing and premature cracking and failure of tires according to the tire manufacturers. Optimum Tire Shine has no chemical solvents and therefore will not cause damage to the tires. Furthermore, Optimum Tire Shine contains the same UV and Ozone protectants that are used in the manufacturing of tires for additional protection against the elements. Optimum Tire Shine contains no chemical solvents or other environmentally hazardous compounds. Optimum Tire Shine contains no VOCs and only the finest methicones that are safe for tires, the consumer, and the environment. -
Opti-Coat® MDR (Mineral Deposit Remover) is the most advanced cleaner that dissolves and removes mineral deposits and other contaminants from exterior automotive surfaces. It is a non-abrasive chemical cleaner that will dissolve and remove water based contaminants without the need to polish or abrade the surface. 16 oz. size -
Optimum Intensive Polish is a fast cutting polish that leaves a great finish in one step in most cases. It works as a compound with a wool pad that removes 2,000 grit or lighter wet sanding marks, and a medium polish with a polishing pad that can finish in one step. Just like all Optimum polishes, Optimum Intensive Polish is extremely easy to use and has a long working time with no dusting or sling issues. Its spray application minimizes the chance of overloading or gumming up the pad, and it provides an even application. Optimum Intensive Polish easily wipes off with a damp microfiber towel, whether you use it in the sun or shade, to achieve outstanding results. Optimum Intensive Polish works quickly to remove (not hide) swirl marks, scratches, and other blemishes, while creating a perfect shine on all types of paint. By spraying the polish onto a buffing pad, you can effectively prime the entire pad with minimal amount of product. Therefore you are using the entire pad to polish the paint and achieve better results in less time than a conventional polish. Optimum Intensive Polish has excellent workability on painted surfaces and will not clog buffing pads. Aggressive enough for paint correction and swirl removal, yet the shine, clarity, and gloss of the paint left behind requires only final protection in most cases. Directions: To remove 2,000 grit or finer sanding marks spray Optimum Intensive Polish on the Optimum Wool Pad using Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. To remove lighter scratches and swirl marks, spray Optimum Intensive Polish on the orange waffle or black waffle foam pad using Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. 1. Shake Well. 2. Use 2-3 sprays initially to prime the pad. After the initial priming, use only two sprays per panel. There is no need to apply additional product since Optimum Intensive Polish has a long working time and will continue on working to remove the scratches. 3. Use light to medium pressure on the buffer until desired results are achieved. 4. Wipe off residue with a dampened microfiber towel. 5. On softer clears, follow up with Optimum Hyper Polish to refine the paint surface before applying Optimum Car Wax. Optimum Intensive Polish is bodyshop safe and meets all VOC regulations. -
Optimum Blue Waffle Foam Pad is a great finishing pad that can be used with Zentool DA Polisher to remove minor marring and light scratches and swirl marks in one or two passes. The waffle design as well as the breathable backing plate of Zentool DA Polisher keeps the surface cool to avoid burnishing the paint that is caused by over-heating the surface. Optimum Blue Waffle Foam Pad can be used on the softest paints to create a perfect finish with least amount of effort Directions: Spray Optimum Hyper Polish on the Optimum Blue Waffle Foam Pad as the final step in your polishing process to create a finish with unsurpassed gloss and clarity. Follow up with Optimum Car Wax or Opti-Seal for the final protection. -
BUY ONE, GET ONE FREE. PUT ONE IN YOUR CART AND WE WILL SEND AN EXTRA IN YOUR ORDER.
You do not need to put two in your cart.
Optimum Hyper™ Compound is the first and only spray compound in the marketplace that can remove 1,000 grit and deep scratches in seconds while creating a great finish. Optimum Hyper™ Compound was designed for professional detailers and auto body shops to cut through wet sanding marks and deep scratches in one or two passes. Optimum Hyper™ Compound offers all the advantages of Optimum line of polishes with long working time and low to no dusting.
The spray on application provides ease of use and reduces the amount of product needed to a fraction of the traditional products. 2-3 sprays is enough to cover the entire pad making the whole pad do the cutting and eliminating dry buffing. The minor swirls left after using Optimum Hyper™ Compound can easily be removed with the Optimum™ Hyper Polish. Optimum Hyper™ Compound has a long working time to allow complete paint correction with one application. The residue is easily wiped off with a dry or damp microfiber towel. Optimum Hyper™ Compound contains no silicone oils or wax, so it is completely body shop safe.
Optimum Hyper™ Compound can be used at any speed on your polisher with a wool or foam pad. When using a wool buffing pad, the compound will remove 1000 grit sand scratches and lighter using an Optimum Hyper™Wool Foam Pad with Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. Faster buffing speed is not needed with this product. When using a medium or heavy cut foam pad, the compound will remove 2,000 sand scratches and lighter with Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. The compound works more or less aggressively depending on the pad you choose.
Directions:
To remove 1,000 grit or finer sanding marks spray Optimum Hyper™ Compound on the Optimum Hyper™Wool Foam Pad using Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. To remove lighter scratches and swirl marks, spray Optimum Hyper™ Compound on an orange waffle or black waffle foam pad using Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM.
1. Shake Well.
2. Use 2-3 sprays initially to prime the pad. After the initial priming, use two sprays per panel. There is no need to apply additional product since Optimum Hyper™ Compound has a long working time and will continue on working to remove the scratches.
3. Use light to medium pressure on the buffer until desired results are achieved.
4. Wipe off residue with a dampened microfiber towel. Follow up with Optimum Hyper Polish to refine the paint surface before applying Optimum Car Wax. -
The New & Improved Opti-Guard Fabric creates a more stain resistant and water repellent coating to protect fabric seats, carpets, and other textile surfaces. When liquids come in contact with Opti-Guard Fabric, the surface repels the substance without penetrating or staining the material. The New & Improved Opti-Guard Fabric forms a strong bond with the fibers to prevent removal during cleaning. This is the Opti-Guard Fabric stand-alone product for professional application and does not include a warranty. -
The Optimum Microfiber Cutting Pad is the most advanced cutting pad in the marketplace. It is designed to be used with any rotary or dual action polisher to provide excellent cut and great finish. The advanced microfiber material removes paint defects quickly leaving a great finish behind. The thick foam keeps the pad and paint cooler to create better results while increasing the life of the pad. The Optimum Microfiber Cutting Pad can be used with any polish via any rotary or dual action polisher to provide great cut and a great finish. For best results, use the Optimum Microfiber Cutting Pad with Optimum Compound or Optimum Hyper Compound to remove deep scratches and heavy swirl marks. -
Professional grade 380 gsm Minx Edgeless Microfiber All-Purpose Detailing Towel. Super soft! Super absorbent! Lint Free Non Abrasive Absorbent No Tags Extremely durable Towel softness increases with each washing! Machine wash with mild liquid detergent (free of dyes, fragrance, bleach & softeners). Tumble dry low and do NOT iron. Do NOT use any fabric softener. Do NOT use chlorine bleach. Wash only with other non-linting materials. No cotton. -
PRO3- Benefits include:
- Better than any coating in terms of depth, gloss, scratch resistance, and hydrophobic properties.
- 4x thicker than Pro/Pro+
- Pro 3 Base Coat is a Silicon Carbide resin.
- Pro3 Top Coat is a hybrid.
- Only available to Exclusive Authorized Installers.
- Opti-Coat Pro3 packs will include (1) 20cc of Opti-Coat Pro3 and (1) 20 cc of the Top Coat in every warranty box .
- What you need to know:
- Top Coat should be applied over Opti-Coat Pro3 within 30-45 minutes Pro3 application.
- Total Time: 2-3 hours, 4 layers. No time between layers. Back to back.
- Curing is very similar to Pro & Pro+ however Pro3 is easier to apply!
- You will be provided with a blue foam applicator and a microsuede applicator. Use whichever works best for you. You will find your own preference.
- Limited Lifetime
- Required yearly maintenance
- Cost: $350 minimum which includes a $50 admin fee.
- Includes decontamination wash, clay/MDR, polish off scratches
- If they do not have their yearly check in the warranty reverts to 7 years.
- Document on how to do a maintenance will be provided.
- Benefits include:
-
The Optimum Microfiber Polishing Pad is the most advanced polishing pad in the marketplace. It is designed to be used with any rotary or dual action polisher to provide excellent cut and excellent finish. The advanced microfiber material removes paint defects quickly leaving an excellent finish behind. The thick foam keeps the pad and paint cooler to create better results while increasing the life of the pad. The Optimum Microfiber Polishing Pad can be used with any polish and any rotary or dual action polisher to provide great cut and a great finish. For best results, use the Optimum Microfiber Polishing Pad with Optimum Polish or Optimum Hyper Polish to remove light scratches and swirl marks. -
Optimum Metal Polish is the most effective and easy to use metal polish you will ever use! It can be used to remove oxidation, scratches, and swirl marks from all metal surfaces leaving a mirror shine. Optimum Metal Polish also leaves a protective coating to protect metal surfaces from oxidation. Optimum Metal Polish can be used by hand or with buffing machines on any metal surface. The sub-micron polishing agents and chemical cleaners work quickly to remove oxidation, scratches, and swirl marks quickly to create a flawless mirror shine. -
Sale!
Sale! Optimum Opti-Coat Pro Polo Shirt with the Opti-Coat Pro logo on front, back and both sleeves. -
Optimum Opti-Glass Coating is designed to chemically bond to silica based surfaces such as automotive glass and provide long term water repellency and improve resistance against scratching and rock chips for up to one year. Use the Optimum Glass Clean & Protect for subsequent cleaning to increase the longevity of Optimum Opti-Glass Coating indefinitely. Optimum Opti-Glass Coating is highly concentrated and one bottle is enough to cover 20-30 windshields. The improved visibility and the increased chip resistance that Optimum Opti-Glass Coating provides will make driving safer and more enjoyable. Additionally Optimum Opti-Glass Coating will prevent ice or snow from bonding to the glass surfaces. For best results before applying Optimum Opti-Glass Coating make sure the surface of glass is clean and free of any contaminants. Directions: Apply when the temperature is between 60°-90° F (15°-30°C). Do not apply in direct sunlight. 1. Polish glass as needed with Optimum Polish II or Opti-Eraser to remove any bonded contaminants. 2. Wipe down the surface with 15% Isopropanol (Rubbing Alcohol) solution to remove any oils or sealers. 3. Apply an even amount of Optimum Opti-Glass Coating to an applicator pad. 4. Wipe Optimum Opti-Glass Coating onto one half of the windshield at a time in a circular manner. 5. Allow Optimum Opti-Glass Coating to dry for 2 minutes and then wipe off the excess. If you do not remove the excess coating, it will harden and will require polishing to remove it. (Net: 60 CC) -
Glaze, Polish, & Seal with Optimum GPS™ All-in-One Optimum GPS™ is the most remarkable, all-in-one product ever produced in a spray form! This zero dusting, buttery-smooth formula is the ultimate, one-step product. It creates gloss and long term protection that is second to none. Optimum GPS™ contains micro abrasives that eliminate (not hide) minor surface imperfections. It provides swirl mark removal, the final polish and a durable wax/sealant…all in one step! The spray application makes priming the pad very easy and reduces product usage. GPS™ creates a perfect shine on all types of paint, fiberglass, gel coat and smooth molded plastic. A single application provides "optimum" protection for your vehicle that lasts for months! Directions for use: Hand Application: Spray on a small area and wipe in with a dampened foam or cloth applicator. After slight hazing occurs, wipe-off with a microfiber or terry towel for a perfect shine. Machine Application: Apply with orbital or rotary polisher and appropriate pad for the job. Spray once to prime the pad and one spray per panel to create a lubricating barrier between the buffing pad and the surface. Work across the area until product disappears. (We suggest 1000-1400 rpms for rotary polishers). Wipe with a lightly misted cotton towel for a steak-free, perfect finish. For deeper surface imperfections, use Optimum Polish or Optimum Compound prior to GPS. -
Optimum Multi-Surface Towel Terry towels work great for enamel paints. However, most of today's cars have a clear coat finish that not only gets scratched much easier, but it also shows scratches and blemishes much more. These traditional towels create swirl marks on the clear coat finish every time they are used. That is why Microfiber is the only towel that should come in contact with clear coat finishes and is the choice of most car wash and detailing professionals. Optimum Multi-Surface Towel is the finest grade of Microfiber available and is a blend of hydrophilic (polyamide) and hydrophobic (polyester) fibers and is lint free. The hydrophilic nature allows this towel to hold up to 7 times its weight in water, making drying the car quick and easy; the hydrophobic character makes it ideal for applying Optimum Car Wax. These are some of the reasons why most car washes and detail shops use Optimum Multi-Surface Towel with Optimum Car Wax to get the maximum shine in the least amount of time. Another reason of course, is that one Optimum Multi-Surface Towel lasts hundreds of washes, and more than pays for itself in time and money. These are some of the reasons why Optimum Microfiber Towel is the highest quality microfiber towel available today: Split Microfiber is an optimum combination of polyester & polyamide. Lint-Free. Microfiber holds 7 times its weight in liquid and dirt. Attracts and holds oil, grease, dirt, grime, film, dust. Tough on dirt, gentle on surface. -
Chemical dispenser accurately measures up to 3 oz. (90 ml) of chemicals. Screw onto chemical bottles (not included). Set exact amount of liquid needed with adjustable regulator, squeeze to fill chamber, then pour. Graduated in 1/4 oz. and 5 ml increments. -
Optimum Opti-Lens Coating is the most advanced polymer system that is specifically designed for the protection of headlight lenses. This hybrid resin is a combination of Opti-Coat 2.0 ceramic resin and an acrylic resin for maximum bonding and protection of acrylic and polycarbonate lenses. Additionally Optimum Opti-Lens Coating contains high levels of UV absorbers to minimize discoloration and fading of automotive headlight lenses. Optimum Opti-Lens Coating is highly concentrated and one tube is enough to cover 5-6 sets of headlights. Once applied, Optimum Opti-Lens Coating will form a permanent bond to the surface and can only be removed by polishing or paint removers. Directions: 1. Clean headlights with 15% IPA solution to remove any oils, waxes, or sealants. 2. Remove all the oxidation by sanding and then polishing the headlights with Optimum Polish II or Optimum Hyper Polish. 3. Wipe down the entire lens with a clean damp microfiber towel to remove any polishing residue. 4. Prime the applicator pad by making an X pattern across the pad. Only a few drops will be needed per headlight lens. 5. Wipe Optimum Opti-Lens Coating on the headlight lens in a circular or back and forth direction. 6. Within 5 minutes, inspect the headlight with adequate lighting looking for any thick areas that have not flashed away to clear. 7. Use the foam applicator or an Optimum Multi-Surface Microfiber Towel to wipe down and remove any excess. -
- Opti-Coat Pro Motorcycle is designed specifically for the motorcycle industry and contains both Opti-Coat Pro and Opti-Guard Leather for complete protection of motorcycles.
- 5 cc Opti-Coat Pro
- 5 cc Opti-Metal Coating
- 5 cc Opti-Guard Leather
- 2 oz Opti-Coat Primer
- Microfiber Towel
- Foam Applicator
- Warranty Card
-
- Can be safely used on plastic, leather and vinyl surfaces
- Can be used with Optimum Power Clean, Optimum No Rinse, and Optimum Fabric Clean & Protectant
- Microfiber design speeds up and increases the cleaning power from traditional brushes
- Angeled design means getting into tight spaces and corners
-
NEW! The Ultimate™ Solution For All Metal Surfaces! Opti-Metal Coat™ is a rapid curing ceramic coating designed to bond to all metal surfaces, to prevent ongoing oxidation and damage during cleaning processes. Opti-Metal Coat™ creates a protective barrier with an extremely strong bond to metal surfaces and high resistance to acids and chemicals. The hydrophobic properties provide easy ongoing maintenance for all automotive, marine, aviation and industrial applications. -
Opti-Coat RV & Marine is a ceramic clear coating with superior resistance to scratching (9H), chemical etching, fading due to UV, and provides outstanding release properties. Opti-Coat RV & Marine pre-polymer cross links and forms a continuous protective film on the painted gel coat surfaces it is applied to, similar to a single component isocyanate that forms a clear coat finish. Opti-Coat RV & Marine has better chemical resistance, scratch & mar resistance, and release properties than any paint coating in use. It provides permanent protection for all modern factory paints and gel coats and can also be used to protect metal and hard plastic surfaces. This is for professional installers and includes (1) 30cc syringe of Opti-Coat RV & Marine. This is not warrantied.Opti-Coat RV & Marine Care Guide
WASHING For best results, wash with Opti-Coat No Rinse on a monthly basis at a minimum to avoid excessive contamination build up on the surface. Avoid washing your Boat or RV in direct sunlight if possible. Heated panels will cause drying and possibly leave streaks and water spotting on the surface. If this is not an option, then wash and dry one panel at a time for best results. Wash the cleanest panels first. Leave the dirtiest panels for last to avoid cross contamination. Usually this involves starting from the top panels and followed by the lower ones. DRYING Always dry your RV or Boat completely and never allow it to air dry. Tap water contains minerals. When the water evaporates, these minerals are deposited on the surface creating water spots. As the minerals harden with heat, they can be extremely difficult to remove from the surface. SPOT REMOVAL OF SURFACE CONTAMINATION Never use abrasive products to polish the coating or to remove surface contamination. Never use excessive rubbing or force to remove spot contamination. Surface contamination such as tar and other contaminants should be removed as soon as possible to avoid temporary staining of the coating and/or hardening on the surface requiring professional removal. For assistance with contamination removal or maintenance standards and techniques, contact your Opti-Coat Marine & RV dealer for professional advice. -
Optimum Purple Foam Wool Pad is a thick plush pad that works well with Optimum Compound or Optimum Intensive™ Compound to remove 2,000 grit or finer sanding marks in one or two passes. The 1" thickness allows this pad to work with both rotary polishers and Zentool DA Polisher for quickly removing scratches safely and effectively. Clean the pad by using a brush or spur as needed. Available in 6" and 7" diameter.