-
Opti-Coat® FerreX™ is designed to dissolve and remove ferrous oxides such as brake dust from wheels and industrial fallout from painted surfaces quickly by bonding and dissolving them away with minimal effort. Furthermore, Opti-Coat® FerreX™ will dissolve and remove other surface contaminants such as tar and wax at the same time. -
Opti-Coat® M-Wash™ is designed to clean the toughest automotive grime. With regular use, the added fluoropolymers will repel airborne heavy metal pollution and maintain the coated surface free of bonded contamination. The rich foaming lather traps dirt and grime and rinses with cold water leaving a smooth, clean surface behind. 16 oz. size -
Opti-Coat® MDR (Mineral Deposit Remover) is the most advanced cleaner that dissolves and removes mineral deposits and other contaminants from exterior automotive surfaces. It is a non-abrasive chemical cleaner that will dissolve and remove water based contaminants without the need to polish or abrade the surface. 16 oz. size -
Opti-Coat® No Rinse is the fastest, easiest and the most environmentally friendly way to wash any vehicle. Its proprietary polymers bond to the vehicle surfaces and trap dirt to clean without rinsing and leave a very slick and glossy finish that is mar-free. Properly used, you will not scratch the vehicle surface. Washing with Opti-Coat® No Rinse greatly reduces the discharge of pollutants into storm drains, sewers and ground water. Opti-Coat® No Rinse helps both commercial and individual users comply with the discharge guidelines established by the Clean Water Act and the Environmental Protection Agency. 16 oz. size -
Opti-Coat® Glass Clean & Protect is designed to clean and boost your Opti-Glass™ Pro Coating with a simple wipe on, wipe off application. It will clean glass surfaces without streaking while the polymers will bond to glass surfaces and continue to add protection every time you use this product. Use it by itself or in combination with your Opti-Glass™ Pro Coating for maximum hydrophobicity and durability. 16 oz. size -
Opti-Coat® Power Clean™ is The Ultimate™ multi-surface cleaner for any cleaning application! Opti-Coat® Power Clean™ is a revolutionary product that is formulated utilizing special polymers and emulsifiers to safely clean all automotive surfaces. It is environmentally friendly, safe for the user, and can be diluted to suit any cleaning job. Use it at full strength for the toughest dirt and grime, or dilute anywhere from 3 parts water to 1 part Power Clean to as much as 10:1. 16 oz. size -
Opti-Coat® Protectant Plus cleans, restores and protects leather, vinyl and plastic surfaces leaving a natural satin matte finish. Opti-Coat® Protectant Plus contains a balance of cleaners, penetrating oils and UV inhibitors that retain the original color of these surfaces and protect against sun damage. 16 oz. size -
Opti-Coat® Tire Gel is a water-based VOC free tire dressing with high gloss and excellent durability. It can be used to protect and dress tires, wheel wells, interior and exterior plastic trim wherever a high gloss finish is desired. Opti-Coat® Tire Gel also protects these surfaces from ozone, UV and oxidation. 16 oz. size -
Opti-Coat® Fabric Clean & Protect cleans away grease stains and spills from fabric and carpet surfaces while leaving behind a polymetric protectant to maintain your Opti-Guard Protection. Opti-Coat® Fabric Clean & Protect contains substantive polymers that trap and remove dirt and grime while bonding to the fabric to protect the surface from contaminants.- A powerful cleaner that is also safe for carpet
- Has built-in polymers that provide protection afterward
- No diluting necessary
-
Opti-Coat® Hyper™ Seal is The Ultimate™ maintenance solution to help prevent bonding of contamination such as hard water deposits, bug splatter and other airborne contamination. Opti-Coat® Hyper™ Seal creates a super slick surface for easy cleaning in high pollution environments. Use Opti-Coat® Hyper™ Seal on wet surfaces as a drying aid after washing or apply to dry surfaces including paint, plastic moldings, rubber seals and glass. The new formula is longer lasting and can last a year or more! Orders in case quantity will be responsible for full cost of shipping and are not eligible for flat fee shipping. We will contact you with the full cost once the order has been placed. -
Optimum Opti-Lens Coating is the most advanced polymer system that is specifically designed for the protection of headlight lenses. This hybrid resin is a combination of Opti-Coat 2.0 ceramic resin and an acrylic resin for maximum bonding and protection of acrylic and polycarbonate lenses. Additionally Optimum Opti-Lens Coating contains high levels of UV absorbers to minimize discoloration and fading of automotive headlight lenses. Optimum Opti-Lens Coating is highly concentrated and one tube is enough to cover 5-6 sets of headlights. Once applied, Optimum Opti-Lens Coating will form a permanent bond to the surface and can only be removed by polishing or paint removers. Directions: 1. Clean headlights with 15% IPA solution to remove any oils, waxes, or sealants. 2. Remove all the oxidation by sanding and then polishing the headlights with Optimum Polish II or Optimum Hyper Polish. 3. Wipe down the entire lens with a clean damp microfiber towel to remove any polishing residue. 4. Prime the applicator pad by making an X pattern across the pad. Only a few drops will be needed per headlight lens. 5. Wipe Optimum Opti-Lens Coating on the headlight lens in a circular or back and forth direction. 6. Within 5 minutes, inspect the headlight with adequate lighting looking for any thick areas that have not flashed away to clear. 7. Use the foam applicator or an Optimum Multi-Surface Microfiber Towel to wipe down and remove any excess. -
Optimum Opti-Trim™ Protect is a clear hybrid resin coating designed to prevent plastic trim from UV damage. Opti-Trim Protect contains a high level of UV absorbers to help prevent fading of plastic trim and maintain the factory appearance. Opti-Trim Protect also contains special dye additives to restore faded and oxidized trim back to a like-new factory appearance. Additionally, Opti-Trim Protect helps prevent future fading and provides long term protection. -
Optimum Assure is a new revolutionary product that cleans and disinfects surfaces from most common bacteria including Covid-19 virus as well being a fungicide and controlling mildew.
Assure disinfects and deodorizes hard, non-porous surfaces such as: cars, trucks, campers, RVs, boats and other watercrafts including ships and barges, public transportation, trains, taxis, airplanes, and helicopters. Assure kills 99.9% of household and institutional bacteria and viruses including Covid-19 virus on hard non-porous surfaces.
Fungicidal Performance: Assure kills the following fungi in 10 minutes on hard, non-porous surfaces with up to 5% soil: Candida albicans and Tricophyton interdigitale.
Mildewstatic Performance: Assure controls the following mold for 7 days on hard surfaces with up to 5% soil: Aspergillus niger.
Viricidal Performance: Assure kills the following viruses in 10 minutes on hard, non-porous surfaces with up to 5% soil: Avian influenza A virus, Hanatavirus, Hepatitis A virus, Hepatitis B virus, Hepatitis C virus, Herpes Simplex type 1, Herpes Simplex type 2, Human Cornoa virus, Influenza A virus, Respiratory Syncitial virus, SARS Covid2 (Covid19 Virus), and Vaccinia virus.
Directions:
To Kill Fungi: Pre-clean visibly soiled surfaces. Apply Assure undiluted to hard, non-porous surfaces and let air dry.
To Control Mold/Mildew: Apply Assure undiluted to hard, non-porous surfaces which will effectively inhibit the growth of mold and mildew and their odors. Repeat treatment once every seven days if new growth appears.
For Use as a General Disinfectant:
1. Pre-clean visibly soiled surfaces.
2. Apply Assure undiluted to the surfaces with a sponge, brush, cloth, or trigger spray. For spray application, spray 6-8 inches form the surface. Do not breathe spray.
3. Treated surfaces must remain visibly wet for 1 minute to kill SARS Covid2and 10 minutes to kill all organisms listed above. Rinse with potable water after use on surfaces that come in contact with food.
4. Wipe dry with a clean cloth or allow to air dry.
5. Change solution when visibly dirty. -
Optimum Car Care No Rinse™ Wash & Seal Kit includes the following travel size products in a draw string plastic bag: 4 oz. Optimum No Rinse™ Wash & Shine is the most technologically advanced car wash system that only requires 1-2 gallons of water to wash the entire car and doesn't require rinsing. Full size product link: Optimum No Rinse™ Wash & Shine 4 oz. Optimum Tire Shine, a water-based, solvent-free, and VOC free formula that provides great shine to tires and vinyl surfaces. Full size product: Optimum Tire Shine 2 oz. Optimum Opti-Seal is a revolutionary paint sealant that creates unmatched slickness and gloss with just a few drops per vehicle. Full size product: Optimum Opti-Seal 4 oz. Optimum Protectant Plus to clean, restore, and protect leather surfaces, vinyl surfaces, and moldings. Full size product: Optimum Protectant Plus (1) 16" x 16" Optimum Multi-Surface Microfiber Towel (1) Optimum Yellow Foam Applicator -
Optimum Car Care Wash & Wax Kit inclues the following travel size products in a draw string plastic bag: 4 oz. Optimum Car Wash to clean the toughest automotive grime, while maximizing the durability of your wax or sealant. Full size product link: Optimum Car Wash 4 oz. Optimum Tire Shine, a water-based, solvent-free, and VOC free formula that provides great shine to tires and vinyl surfaces. Full size product: Optimum Tire Shine 4 oz. Optimum Car Wax, the only spray car wax that provides the durability of a paste wax with long-lasting UV protection. Full size product: Optimum Car Wax 4 oz. Optimum Protectant Plus to clean, restore, and protect leather surfaces, vinyl surfaces, and moldings. Full size product: Optimum Protectant Plus 16" x 16" Optimum Multi-Surface Microfiber Towel -
- Highly concentrated formula only requiring .5 oz per gallon (15ml to 4-5 liters) to produce results
- pH neutral soap will not strip protection
- Highly foamable formula is perfect for foam cannons
- Bio-degradable ingredients making it safe to use anywhere
-
Optimum Car Wax is the only spray car wax that provides the durability of a paste wax and long-lasting UV protection. A combination of high-grade Carnauba wax, sealant polymers and UV inhibitors forms a protective layer on the painted surface to protect the paint from sun damage and environmental elements for up to 5 months. Key Benefits: Easy to Use Takes Less than 15 minutes to wax the whole car. No buffing required. No residues to remove. Durable 1 application lasts up to 5 months UV Protection Helps reduce fading Non-Abrasive Will not create swirl marks like traditional car wax/polishes Environmentally Friendly Contains no harsh chemicals or VOC's Performance Guaranteed If not completely satisfied with performance, purchase price will be refunded. Optimum Car Wax is currently used by many car washes and detail shops. The superior performance, ease of application, and no messy residue are just some of the reasons these professionals prefer Optimum Car Wax over all other products in the marketplace. -
- A powerful but safe formula that makes dirt just disappear!
- Built-in polymers wrap around the carpet fibers to protect them after cleaning
- Concentrated formula dilutable to 3:1 for most interiors
-
Optimum FerreX™ is designed to dissolve and remove ferrous oxides from wheels and painted surfaces quickly by bonding and dissolving them away with minimal effort. Furthermore, Optimum FerreX™ will dissolve and remove other surface contaminants such as tar and wax at the same time. Directions for wheels: Avoid using on hot surfaces. Wash wheels to remove excess contaminants. Spray Optimum FerreX™ directly on wheels and allow 1 - 2 minutes to fully dissolve ferrous oxides. Agitate with a soft bristle brush as needed. Rinse off with plenty of water. Directions for painted surfaces: Wash with Optimum No Rinse™ Wash & Shine or Optimum Car Wash before applying Optimum FerreX™. Use on a cool surface and out of direct sunlight. Spray Optimum FerreX™ directly on painted surface and allow 1 - 2 minutes to fully dissolve ferrous oxide. Agitate with a microfiber towel or soft sponge if necessary. Rinse off with plenty of water. -
The New & Improved Optimum Gelcoat Restorer is engineered to return Gelcoat to its original factory finish without the need for polishing. The new formula is easier to apply and levels itself better for faster application times and a more even application. Optimum Gelcoat Restorer ("GCR") rebuilds the Gelcoat keeping the original thickness and restoring the gloss as before while adding additional UV protection to protect from oxidation. Directions: 1. Remove loose oxidation using pure Optimum Power Clean and a brush or mild scuff pad. 2. Rinse the surface thoroughly and dry. 3. Wearing gloves and eye protection, apply GCR to the surface in overlapping circular motions. If the Gelcoat was heavily oxidized, the GCR will soak in. Do not over apply, first coats should be very thin. Use a pearl weave, low nap towel for application. 4. Once dry to the touch (20-30 minutes), apply a second coat. Apply directly onto towel, not on panel. A sprayer can be attached to GCR bottle or product transferred for application. When the applicator begins to drag, add more product. 5. Depending on the level of oxidation, up to 5 coats may be required. Last pass, apply in straight lines. 6. To maintain the restored surface, wash with Optimum No Rinse (ONR) and apply Optimum Car Wax regularly. 7. One bottle of GCR is enough for 4 coats on a 40’ Boat or RV. Gelcoat Hints: • Thin coats and multiple coats (up to 5) • Only use on old/fading gelcoat • Can be applied in bright sunlight. • Sticky/spotty if too much applied • Use DAMP pearl weave towels, low nap, for smoother application. • 2-3 year durability (wax every 6 months) – Absorbs into the gel coat and restores from the inside out. • It’s acrylic based. • To remove streaking, polish with Hyper Polish and orange foam pad (or if necessary, move up to Intensive Polish). There are four major points for best application for GCR: 1. The condition of the Gelcoat – Will GCR work on it or not? Gelcoat Restorer is made for heavily oxidized paint. New Gelcoat isn’t porous as old, oxidized Gelcoat so it won’t accept the product, whether it is clear or colored Gelcoat. 2. Removing this oxidized Gelcoat is essential for the pores to accept the coating, exactly like prepping paint for coating, with concentrated Power Clean and white scuff pad. 3. The amount of product also essential, multiple moderate layers are better than one thick coat, both will streak. After removing the oxidized layer, the Gelcoat will look clean but dull. After 1-3 layers there may not be much gloss. Layers 4-5, the gloss will improve. 4. What you apply with is as important as the amount, a DAMP pearl weave towel or low nap MF applicator is the best way to apply GCR. -
Glaze, Polish, & Seal with Optimum GPS™ All-in-One Optimum GPS™ is the most remarkable, all-in-one product ever produced in a spray form! This zero dusting, buttery-smooth formula is the ultimate, one-step product. It creates gloss and long term protection that is second to none. Optimum GPS™ contains micro abrasives that eliminate (not hide) minor surface imperfections. It provides swirl mark removal, the final polish and a durable wax/sealant…all in one step! The spray application makes priming the pad very easy and reduces product usage. GPS™ creates a perfect shine on all types of paint, fiberglass, gel coat and smooth molded plastic. A single application provides "optimum" protection for your vehicle that lasts for months! Directions for use: Hand Application: Spray on a small area and wipe in with a dampened foam or cloth applicator. After slight hazing occurs, wipe-off with a microfiber or terry towel for a perfect shine. Machine Application: Apply with orbital or rotary polisher and appropriate pad for the job. Spray once to prime the pad and one spray per panel to create a lubricating barrier between the buffing pad and the surface. Work across the area until product disappears. (We suggest 1000-1400 rpms for rotary polishers). Wipe with a lightly misted cotton towel for a steak-free, perfect finish. For deeper surface imperfections, use Optimum Polish or Optimum Compound prior to GPS. -
NEW FORMULA The new Optimum Gloss-Coat™ has added Ceramic polymers and is the most advanced polymer system that forms a layer of clear coat over automotive finishes. The new Optimum Gloss-Coat™ provides better scratch and mar resistance, better UV resistance, better chemical etch resistance, and has better release properties than any other consumer Ceramic product while providing unsurpassed gloss and slickness. Additionally, you can top the new Optimum Gloss-Coat™ with any non-abrasive wax or sealant of your choice to add additional gloss and slickness. Optimum Gloss-Coat™ can be used to protect the following surfaces: • painted surfaces • wheels • plastic trim • bumpers • aluminum & chrome surfaces Since Optimum Gloss-Coat™ bonds to surfaces it is applied to, any paint imperfections must be removed with Optimum Hyper Polish before application. Also, all waxes and oils must be removed from the surfaces for proper bonding. Not recommended for glass. -
BUY ONE, GET ONE FREE. PUT ONE IN YOUR CART AND WE WILL SEND AN EXTRA IN YOUR ORDER.
You do not need to put two in your cart.
Optimum Hyper™ Compound is the first and only spray compound in the marketplace that can remove 1,000 grit and deep scratches in seconds while creating a great finish. Optimum Hyper™ Compound was designed for professional detailers and auto body shops to cut through wet sanding marks and deep scratches in one or two passes. Optimum Hyper™ Compound offers all the advantages of Optimum line of polishes with long working time and low to no dusting.
The spray on application provides ease of use and reduces the amount of product needed to a fraction of the traditional products. 2-3 sprays is enough to cover the entire pad making the whole pad do the cutting and eliminating dry buffing. The minor swirls left after using Optimum Hyper™ Compound can easily be removed with the Optimum™ Hyper Polish. Optimum Hyper™ Compound has a long working time to allow complete paint correction with one application. The residue is easily wiped off with a dry or damp microfiber towel. Optimum Hyper™ Compound contains no silicone oils or wax, so it is completely body shop safe.
Optimum Hyper™ Compound can be used at any speed on your polisher with a wool or foam pad. When using a wool buffing pad, the compound will remove 1000 grit sand scratches and lighter using an Optimum Hyper™Wool Foam Pad with Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. Faster buffing speed is not needed with this product. When using a medium or heavy cut foam pad, the compound will remove 2,000 sand scratches and lighter with Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. The compound works more or less aggressively depending on the pad you choose.
Directions:
To remove 1,000 grit or finer sanding marks spray Optimum Hyper™ Compound on the Optimum Hyper™Wool Foam Pad using Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. To remove lighter scratches and swirl marks, spray Optimum Hyper™ Compound on an orange waffle or black waffle foam pad using Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM.
1. Shake Well.
2. Use 2-3 sprays initially to prime the pad. After the initial priming, use two sprays per panel. There is no need to apply additional product since Optimum Hyper™ Compound has a long working time and will continue on working to remove the scratches.
3. Use light to medium pressure on the buffer until desired results are achieved.
4. Wipe off residue with a dampened microfiber towel. Follow up with Optimum Hyper Polish to refine the paint surface before applying Optimum Car Wax. -
New Revision 5 Hyper Compound Available! The new Optimum Hyper™ Compound Revision #5 has the fastest cut while finishing like a polish and works much better than any other compound. Optimum Hyper™ Compound is the first and only spray compound in the marketplace that can remove 1,000 grit and deep scratches in seconds while creating a great finish. Optimum Hyper™ Compound was designed for professional detailers and auto body shops to cut through wet sanding marks and deep scratches in one or two passes. Optimum Hyper™ Compound offers all the advantages of Optimum line of polishes with long working time and low to no dusting. The spray on application provides ease of use and reduces the amount of product needed to a fraction of the traditional products. 2-3 sprays is enough to cover the entire pad making the whole pad do the cutting and eliminating dry buffing. The minor swirls left after using Optimum Hyper™ Compound can easily be removed with the Optimum™ Hyper Polish. Optimum Hyper™ Compound has a long working time to allow complete paint correction with one application. The residue is easily wiped off with a dry or damp microfiber towel. Optimum Hyper™ Compound contains no silicone oils or wax, so it is completely body shop safe. Optimum Hyper™ Compound can be used at any speed on your polisher with a wool or foam pad. When using a wool buffing pad, the compound will remove 1000 grit sand scratches and lighter using an Optimum Hyper™Wool Foam Pad with Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. Faster buffing speed is not needed with this product. When using a medium or heavy cut foam pad, the compound will remove 2,000 sand scratches and lighter with Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. The compound works more or less aggressively depending on the pad you choose. Directions: To remove 1,000 grit or finer sanding marks spray Optimum Hyper™ Compound on the Optimum Hyper™Wool Foam Pad using Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. To remove lighter scratches and swirl marks, spray Optimum Hyper™ Compound on an orange waffle or black waffle foam pad using Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. 1. Shake Well. 2. Use 2-3 sprays initially to prime the pad. After the initial priming, use two sprays per panel. There is no need to apply additional product since Optimum Hyper™ Compound has a long working time and will continue on working to remove the scratches. 3. Use light to medium pressure on the buffer until desired results are achieved. 4. Wipe off residue with a dampened microfiber towel. Follow up with Optimum Hyper Polish to refine the paint surface before applying Optimum Car Wax.