-
Opti-Guard Leather creates a hydrophobic coating to protect coated leather and vinyl surfaces from premature aging, cracking and other damage such as color transfer and staining. Opti-Guard Leather is manufactured using a hybrid ceramic and acrylic resins that allows a strong, flexible coating for these softer surfaces with complete protection from UV damage. Opti-Guard Leather is resistant to chemicals providing multi-year protection which is unheard of for leather coatings. It contains special matting agents to maintain the original factory appearance of the surfaces it is applied to. Apply Opti-Guard Leather to leather seats, vinyl dashboards, leather and vinyl trim pieces for complete protection inside and out. Opti-Guard Leather should not be used on Tanned Leather surfaces. Available in 10 cc (enough for 1 car) and 30 cc (enough for 3 cars) syringes. -
The Optimum Blue Foam Applicator is designed for the application of Opti-Seal or any Optimum coatings and is perfect for applying any other wax or sealant. The strap on one side fits snug on your fingers and helps make the process much easier. Always keep a few on hand for any wax or sealant application. After the application is complete, you can wash the foam applicator with a mild detergent and reuse it again after it is fully dry. -
The New & Improved Opti-Guard Fabric creates a more stain resistant and water repellent coating to protect fabric seats, carpets, and other textile surfaces. When liquids come in contact with Opti-Guard Fabric, the surface repels the substance without penetrating or staining the material. The New & Improved Opti-Guard Fabric forms a strong bond with the fibers to prevent removal during cleaning. This is the Opti-Guard Fabric stand-alone product for professional application and does not include a warranty. -
Chemical dispenser accurately measures up to 3 oz. (90 ml) of chemicals. Screw onto chemical bottles (not included). Set exact amount of liquid needed with adjustable regulator, squeeze to fill chamber, then pour. Graduated in 1/4 oz. and 5 ml increments. -
Pro-Blend chemical dispensers accurately measure up to 3 oz. (90 ml) of chemicals. Screw onto chemical bottles (not included). Set exact amount of liquid needed with adjustable regulator, squeeze to fill chamber, then pour. Graduated in 1/4 oz. and 5 ml increments. -
Opti-Coat Blue Microsuede Applicator Pads are a thin, miniature suede applicator specifically designed for application of coatings such as Opti-Coat. The smaller design makes them more convenient to handle than bulky applicators. Opti-Coat Blue Microsuede Applicator Pads are useful for numerous other purposes such as application of regular sealants and Optimum Opti-Seal. Applicators measure 12cm x 6cm x 2cm -
PRO3- Benefits include:
- Better than any coating in terms of depth, gloss, scratch resistance, and hydrophobic properties.
- 4x thicker than Pro/Pro+
- Pro 3 Base Coat is a Silicon Carbide resin.
- Pro3 Top Coat is a hybrid.
- Only available to Exclusive Authorized Installers.
- Opti-Coat Pro3 packs will include (1) 20cc of Opti-Coat Pro3 and (1) 20 cc of the Top Coat in every warranty box .
- What you need to know:
- Top Coat should be applied over Opti-Coat Pro3 within 30-45 minutes Pro3 application.
- Total Time: 2-3 hours, 4 layers. No time between layers. Back to back.
- Curing is very similar to Pro & Pro+ however Pro3 is easier to apply!
- You will be provided with a blue foam applicator and a microsuede applicator. Use whichever works best for you. You will find your own preference.
- Limited Lifetime
- Required yearly maintenance
- Cost: $350 minimum which includes a $50 admin fee.
- Includes decontamination wash, clay/MDR, polish off scratches
- If they do not have their yearly check in the warranty reverts to 7 years.
- Document on how to do a maintenance will be provided.
- Benefits include:
-
Introducing our new Opti-Coat Pro Polo Shirt with the Opti-Coat Pro logo on front, back and both sleeves. These polo shirts are higher quality with anti-snag, dri-fit, and sublimation process. -
NEW 12 x 12 Yellow Microfiber Towel Every Optimum microfiber towel is manufactured using the highest quality material to produce the highest quality results. Made from commercial quality microfiber to withstand years of repeated washing and drying. -
The NEW Optimum Blue Microfiber Applicator Pad is 3 x 5 x 1. The smaller design makes them more convenient to handle than bulky applicators. The NEW Optimum Blue Microfiber Applicator Pad is useful for numerous purposes. -
Opti-Coat RV & Marine is a ceramic clear coating warrantied for up to 5 years with superior resistance to scratching (9H), chemical etching, fading due to UV, and provides outstanding release properties. Opti-Coat RV & Marine pre-polymer cross links and forms a continuous protective film on the painted gel coat surfaces it is applied to, similar to a single component isocyanate that forms a clear coat finish. Opti-Coat RV & Marine has better chemical resistance, scratch & mar resistance, and release properties than any paint coating in use. It provides permanent protection for all modern factory paints and gel coats and can also be used to protect metal and hard plastic surfaces. This is the warranty package for professional installers and includes (1) 30cc syringe of Opti-Coat RV & Marine and (1) 17 oz. Optimum Paint Prep. MRP: $100 per linear ft.Opti-Coat RV & Marine Care Guide
WASHING For best results, wash with Opti-Coat No Rinse on a monthly basis at a minimum to avoid excessive contamination build up on the surface. Avoid washing your Boat or RV in direct sunlight if possible. Heated panels will cause drying and possibly leave streaks and water spotting on the surface. If this is not an option, then wash and dry one panel at a time for best results. Wash the cleanest panels first. Leave the dirtiest panels for last to avoid cross contamination. Usually this involves starting from the top panels and followed by the lower ones. DRYING Always dry your RV or Boat completely and never allow it to air dry. Tap water contains minerals. When the water evaporates, these minerals are deposited on the surface creating water spots. As the minerals harden with heat, they can be extremely difficult to remove from the surface. SPOT REMOVAL OF SURFACE CONTAMINATION Never use abrasive products to polish the coating or to remove surface contamination. Never use excessive rubbing or force to remove spot contamination. Surface contamination such as tar and other contaminants should be removed as soon as possible to avoid temporary staining of the coating and/or hardening on the surface requiring professional removal. For assistance with contamination removal or maintenance standards and techniques, contact your Opti-Coat Marine & RV dealer for professional advice. MRP: $100.00 per linear foot
