-
NEW FORMULA The new Optimum Gloss-Coat™ has added Ceramic polymers and is the most advanced polymer system that forms a layer of clear coat over automotive finishes. The new Optimum Gloss-Coat™ provides better scratch and mar resistance, better UV resistance, better chemical etch resistance, and has better release properties than any other consumer Ceramic product while providing unsurpassed gloss and slickness. Additionally, you can top the new Optimum Gloss-Coat™ with any non-abrasive wax or sealant of your choice to add additional gloss and slickness. Optimum Gloss-Coat™ can be used to protect the following surfaces: • painted surfaces • wheels • plastic trim • bumpers • aluminum & chrome surfaces Since Optimum Gloss-Coat™ bonds to surfaces it is applied to, any paint imperfections must be removed with Optimum Hyper Polish before application. Also, all waxes and oils must be removed from the surfaces for proper bonding. Not recommended for glass. -
Glaze, Polish, & Seal with Optimum GPS™ All-in-One Optimum GPS™ is the most remarkable, all-in-one product ever produced in a spray form! This zero dusting, buttery-smooth formula is the ultimate, one-step product. It creates gloss and long term protection that is second to none. Optimum GPS™ contains micro abrasives that eliminate (not hide) minor surface imperfections. It provides swirl mark removal, the final polish and a durable wax/sealant…all in one step! The spray application makes priming the pad very easy and reduces product usage. GPS™ creates a perfect shine on all types of paint, fiberglass, gel coat and smooth molded plastic. A single application provides "optimum" protection for your vehicle that lasts for months! Directions for use: Hand Application: Spray on a small area and wipe in with a dampened foam or cloth applicator. After slight hazing occurs, wipe-off with a microfiber or terry towel for a perfect shine. Machine Application: Apply with orbital or rotary polisher and appropriate pad for the job. Spray once to prime the pad and one spray per panel to create a lubricating barrier between the buffing pad and the surface. Work across the area until product disappears. (We suggest 1000-1400 rpms for rotary polishers). Wipe with a lightly misted cotton towel for a steak-free, perfect finish. For deeper surface imperfections, use Optimum Polish or Optimum Compound prior to GPS. -
The New & Improved Optimum Gelcoat Restorer is engineered to return Gelcoat to its original factory finish without the need for polishing. The new formula is easier to apply and levels itself better for faster application times and a more even application. Optimum Gelcoat Restorer ("GCR") rebuilds the Gelcoat keeping the original thickness and restoring the gloss as before while adding additional UV protection to protect from oxidation. Directions: 1. Remove loose oxidation using pure Optimum Power Clean and a brush or mild scuff pad. 2. Rinse the surface thoroughly and dry. 3. Wearing gloves and eye protection, apply GCR to the surface in overlapping circular motions. If the Gelcoat was heavily oxidized, the GCR will soak in. Do not over apply, first coats should be very thin. Use a pearl weave, low nap towel for application. 4. Once dry to the touch (20-30 minutes), apply a second coat. Apply directly onto towel, not on panel. A sprayer can be attached to GCR bottle or product transferred for application. When the applicator begins to drag, add more product. 5. Depending on the level of oxidation, up to 5 coats may be required. Last pass, apply in straight lines. 6. To maintain the restored surface, wash with Optimum No Rinse (ONR) and apply Optimum Car Wax regularly. 7. One bottle of GCR is enough for 4 coats on a 40’ Boat or RV. Gelcoat Hints: • Thin coats and multiple coats (up to 5) • Only use on old/fading gelcoat • Can be applied in bright sunlight. • Sticky/spotty if too much applied • Use DAMP pearl weave towels, low nap, for smoother application. • 2-3 year durability (wax every 6 months) – Absorbs into the gel coat and restores from the inside out. • It’s acrylic based. • To remove streaking, polish with Hyper Polish and orange foam pad (or if necessary, move up to Intensive Polish). There are four major points for best application for GCR: 1. The condition of the Gelcoat – Will GCR work on it or not? Gelcoat Restorer is made for heavily oxidized paint. New Gelcoat isn’t porous as old, oxidized Gelcoat so it won’t accept the product, whether it is clear or colored Gelcoat. 2. Removing this oxidized Gelcoat is essential for the pores to accept the coating, exactly like prepping paint for coating, with concentrated Power Clean and white scuff pad. 3. The amount of product also essential, multiple moderate layers are better than one thick coat, both will streak. After removing the oxidized layer, the Gelcoat will look clean but dull. After 1-3 layers there may not be much gloss. Layers 4-5, the gloss will improve. 4. What you apply with is as important as the amount, a DAMP pearl weave towel or low nap MF applicator is the best way to apply GCR. -
Optimum FerreX™ is designed to dissolve and remove ferrous oxides from wheels and painted surfaces quickly by bonding and dissolving them away with minimal effort. Furthermore, Optimum FerreX™ will dissolve and remove other surface contaminants such as tar and wax at the same time. Directions for wheels: Avoid using on hot surfaces. Wash wheels to remove excess contaminants. Spray Optimum FerreX™ directly on wheels and allow 1 - 2 minutes to fully dissolve ferrous oxides. Agitate with a soft bristle brush as needed. Rinse off with plenty of water. Directions for painted surfaces: Wash with Optimum No Rinse™ Wash & Shine or Optimum Car Wash before applying Optimum FerreX™. Use on a cool surface and out of direct sunlight. Spray Optimum FerreX™ directly on painted surface and allow 1 - 2 minutes to fully dissolve ferrous oxide. Agitate with a microfiber towel or soft sponge if necessary. Rinse off with plenty of water. -
Optimum Cordless Rotary RPC3000 Kit (3 batteries & 2 chargers) with 17 oz. Hyper Polish, 17 oz. Hyper Compound, 6.5" Orange Cutting Pad, 6.5" Black Finishing Pad Optimum Cordless RPC3000 Rotary Polisher gives you the cut and power you need in a rotary polisher without the cord. It comes equipped with 3 battery packs and two chargers for continuous all-day operation to tackle any polishing project with great results and in a minimal amount of time without the hassle of a cord. -
Optimum RPC3000 Cordless Rotary Polisher includes 3 battery packs, two chargers, 6" backing plate and a carrying case Optimum Cordless RPC3000 Rotary Polisher gives you the cut and power you need in a rotary polisher without the cord. It comes equipped with 3 battery packs and two chargers for continuous all-day operation to tackle any polishing project with great results and in a minimal amount of time without the hassle of a cord. -
Optimum CMP001 Cordless Mini DA/Rotary Polisher includes 2 Battery Packs and a Charger, 1" and 2" backing plates, 14 pads and a carrying case. Optimum Cordless DA/Rotary Mini Polisher is designed to work on intricate parts of cars, motorcycles, and hard to reach areas. It has three operating modes, rotary, 1mm throw DA and 3mm throw DA. It includes 1" and 2" backing plates, two extensions for hard-to-reach areas and an assortment of fourteen pads in foam, wool, 1" and 2" sizes. This is a must have tool when more precision is required than possible with larger polishers. -
Optimum Cordless 21MM DA DAC21E3 Kit (3 batteries & 2 chargers) with 17 oz. Hyper Polish, 17 oz. Hyper Compound, 6.5" Orange Cutting Pad, 6.5" Black Finishing Pad Optimum Cordless DAC21E3 DA Polisher is your workhorse polisher unplugged. It comes equipped with 3 battery packs and two chargers for continuous all day operation to tackle any polishing project with great results and in a minimal amount of time without the hassle of cords. This is your new go-to 21MM DA polisher. -
Optimum DAC21E3 Cordless Dual Action Polisher includes 3 Battery Packs and Two Chargers, 6" backing plate and a carrying case Optimum Cordless DAC21E3 DA Polisher is your workhorse polisher unplugged. It comes equipped with 3 battery packs and two chargers for continuous all day operation to tackle any polishing project with great results and in a minimal amount of time without the hassle of cords. This is your new go-to 21MM DA polisher. -
Optimum Corded Rotary RP3000 Optimum Rotary Polisher RP3000 110V Includes 6" Backing Plate Optimum Rotary Polisher RP3000 is perfect for tackling any polishing job in minimal amount of time. With traditional corded power and a 6" backing plate, it has the power you need in a rotary polisher to handle even the toughest jobs. -
- A powerful but safe formula that makes dirt just disappear!
- Built-in polymers wrap around the carpet fibers to protect them after cleaning
- Concentrated formula dilutable to 3:1 for most interiors
-
Optimum Car Wax is the only spray car wax that provides the durability of a paste wax and long-lasting UV protection. A combination of high-grade Carnauba wax, sealant polymers and UV inhibitors forms a protective layer on the painted surface to protect the paint from sun damage and environmental elements for up to 5 months. Key Benefits: Easy to Use Takes Less than 15 minutes to wax the whole car. No buffing required. No residues to remove. Durable 1 application lasts up to 5 months UV Protection Helps reduce fading Non-Abrasive Will not create swirl marks like traditional car wax/polishes Environmentally Friendly Contains no harsh chemicals or VOC's Performance Guaranteed If not completely satisfied with performance, purchase price will be refunded. Optimum Car Wax is currently used by many car washes and detail shops. The superior performance, ease of application, and no messy residue are just some of the reasons these professionals prefer Optimum Car Wax over all other products in the marketplace.