-
NEW & IMPROVED Opti-Glass Pro Coating is designed to chemically bond to silica based surfaces to form a hydrophobic film that provides long term protection to glass and other silica based surfaces. Opti-Glass Pro promotes safety by increasing visibility during inclement weather driving. additionally, it will increase chip resistance, scratch and mar resistance and protect from water staining. For increased durability, clean your glass with Opti-Coat Opti-Glass Clean & Protect on a monthly basis. 60cc -
- Perfect accessory for your pressure washer to produce thick foam
- Comes with all necessary hardware
- Works perfectly with Opticoat Mwash, Optimum Car Wash, Power Clean or Ferrex
-
Optimum Opti-Lens Coating is the most advanced polymer system that is specifically designed for the protection of headlight lenses. This hybrid resin is a combination of Opti-Coat ceramic resin and an acrylic resin for maximum bonding and protection of acrylic and polycarbonate lenses. Additionally Optimum Opti-Lens Coating contains high levels of UV absorbers to minimize discoloration and fading of automotive headlight lenses. Optimum Opti-Lens Coating is highly concentrated. Once applied, Optimum Opti-Lens Coating will form a permanent bond to the surface and can only be removed by polishing or paint removers. 30 cc Directions: 1. Clean headlights with 15% IPA solution to remove any oils, waxes, or sealants. 2. Remove all the oxidation by sanding and then polishing the headlights with Optimum Polish II or Optimum Hyper Polish. 3. Wipe down the entire lens with a clean damp microfiber towel to remove any polishing residue. 4. Prime the applicator pad by making an X pattern across the pad. Only a few drops will be needed per headlight lens. 5. Wipe Optimum Opti-Lens Coating on the headlight lens in a circular or back and forth direction. 6. Within 5 minutes, inspect the headlight with adequate lighting looking for any thick areas that have not flashed away to clear. 7. Use the foam applicator or an Optimum Multi-Surface Microfiber Towel to wipe down and remove any excess. (Previous product code was OLC2013-30) -
Optimum Opti-Trim™ Protect is a clear hybrid resin coating designed to prevent plastic trim from UV damage. Opti-Trim Protect contains a high level of UV absorbers to help prevent fading of plastic trim and maintain the factory appearance. Opti-Trim Protect also contains special dye additives to restore faded and oxidized trim back to a like-new factory appearance. Additionally Opti-Trim Protect helps prevent future fading and provides long term protection. Packaged in 30 cc syringe - enough for 3 - 5 vehicles depending on the amount to be treated. -
Opti-Coat Pro Banner printed on heavy vinyl stock, 32" x 78" with pull-up display stand -
Opti-Guard Interior Coatings Banner printed on heavy vinyl stock, 32" x 78" with pull-up display stand. -
Opti-Lens Coatings Banner printed on heavy vinyl stock, 32" x 78" with pull-up display stand. -
Opti-Trim Plastic Restoration & Protection Banner printed on heavy vinyl stock, 32" x 78" with pull up stand, -
Opti-Guard Leather creates a hydrophobic coating to protect coated leather and vinyl surfaces from premature aging, cracking and other damage such as color transfer and staining. Opti-Guard Leather is manufactured using a hubrid ceramic and acrylic resins that allows a strong, flexible coating for these softer surfaces with complete protection from UV damage. Opti-Guard Leather is resistant to chemicals providing multi-year protection which is unheard of for leather coatings. It contains special matting agents to maintain the original factory appearance of the surfaces it is applied to. Apply Opti-Guard Leather to leather seats, vinyl dashboards, leather and vinyl trim pieces for complete protection inside and out. Opti-Guard Leather should not be used on Tanned Leather surfaces. Opti-Guard Fabric is included for carpets and fabric. This is the Opti-Guard Leather Warranty Pack for professional application and includes the warranty. MRP: $599.00 -
Opti-Guard Fabric creates a stain resistant coating to protect fabric seats, carpets and other textile surfaces. When liquids come in contact with Opti-Guard Fabric, the surface repels the substance without penetrating or staining the material. Opti-Guard Fabric forms a strong bond with the fibers to prevent removal during cleaning. This is the Opti-Guard Fabric Warranty Pack with Opti-Guard Leather for professional application and includes the warranty. Opti-Guard Leather should not be used on Tanned Leather surfaces. MRP: $599.00 -
Sale!
SALE ! ! !
The Opti-Coat Shelving Unit is a custom POP display design that gets attention and helps sell your product. It has been designed and built with top of the line quality and craftsmanship. Perfect for the Opti-Coat Maintenance Line of products, this unit is easy to assemble and comes with full instructions. The display are made of 5/8" engineered wood with a vinyl laminate finish and 1/8" MDF. Graphics are printed on exterior grade PVC vinyl using solvent based inks. These materials give long term wear and durability maintaining the look and strength for many years especially in the indoor environment. Hardware included. Dimensions:73" H x 25" W x 16" D Shipping: Upon receipt of your order, we will contact you for the full cost of shipping. This product does not qualify for flat fee shipping. Packaging: 64 x 19 x 4, 62 lbs. per unit. -
Opti-Coat Pro is a ceramic clear coating warrantied for up to 5 years1 with superior resistance to scratching (9H) which means less scratches over time, chemical etching which means prevents chemical damage to clearcoat , fading due to UV which means the paint system looks vibrant and new, and provides outstanding release properties which means less dirt sticks to the coated surfaces. The Opti-Coat Pro pre-polymer cross links, and forms a continuous protective film on the painted surface it is applied to, similar to a single component isocyanate that forms a clear coat finish with much better properties than the factory clearcoat as described above. Opti-Coat Pro has better chemical resistance than any other automotive paint coating in use which means no damage from the environmental chemicals, better scratch & mar resistance than any other automotive paint coating which means reduced scratching and marring, and better release properties than any other automotive paint coating in use which means less dirt build up between washes. It provides permanent protection for all modern factory paints and can also be used to protect metal and hard plastic surfaces. This is the warranty package for professional installers and includes 2 oz. Opti-Coat Primer. MRP $999.00 The application includes at a minimum, washing, decontamination, polishing with Primer Polish, installation of the coating on all painted surfaces and registration of the warranty. 1 See warranty terms and conditions here: http://opticoat.com/page/warranty-terms -
New and improved! Optimum Pad Washer is designed to provide clean pads for use with the complete line of Optimum polishes and compounds. Pads cleaned with Optimum No Rinse Wash & Shine in the Optimum Pad Washer will run cooler, cut faster, finish better and last longer. The innovative waste capture system allows for perfect pads every time they are cleaned with only clean solution, not recycled solution. The German engineered positive displacement pump ensures years of dependable service. Optimum Pad Washer performs equally well with dual action machines like the Zentool DA Polisher and the Zentool Mini DA Polisher as well as with traditional rotary polishers. Used to clean foam, wool and microfiber pads the Optimum Pad Washer is sure to become a invaluable part of your detailing tool kit. -
- Opti-Coat Pro Motorcycle is designed specifically for the motorcycle industry and contains both Opti-Coat Pro and Opti-Guard Leather for complete protection of motorcycles.
- 5 cc Opti-Coat Pro
- 5 cc Opti-Metal Coating
- 5 cc Opti-Guard Leather
- 2 oz Opti-Coat Primer
- Microfiber Towel
- Foam Applicator
- Warranty Card
-
Sale!
The new Zentool ZEN-12EM2 Dual Action Polisher is the latest advancements in machine polishing technology. With an orbit (throw) of 12mm, the dual action polisher has evolved to become a leader in efficient cutting power while still maintaining the safe operation expected from a DA polisher. The Zentool ZEN-12EM2 is powered by a new, highly efficient 350W motor that produces the torque required to quickly remove heavy paint defects while maintaining the lowest noise levels and smoothest action you will find on a dual action polisher. The Zentool ZEN-12EM2 is manufactured using only the highest quality parts including CNC machined counter weight system for precision weight and perfect balance and thick 4 meter power cable. The Zentool ZEN-12EM2 mini dual action has a vented 76mm (3") backing plate to operate smaller pads and allow fast correction of tight spaces where larger machines can't operate effectively -
PRO PLUS- Pro Plus benefits include:
- Higher Gloss
- Additional scratch resistance
- Greater water and dirt repellent
- More protective properties and durability
- The formula is not affected by cleaning chemicals!
- Pro Plus requires twice as much product per car. Therefore, the Opti-Coat Pro Plus packs will include 15 cc of Opti-Coat Pro and 10 cc of the Pro Plus in every warranty box and the cost will be $250.00 per pack effective immediately.
- What you need to know:
- Pro Plus should be applied over Opti-Coat Pro within 30-45 minutes of Pro application. This will make the application much easier and will maximize bonding.
- Wait till 75-80% of the Pro Plus crosslinks and goes clear, then wipe off the excess. The crosslinking of the Pro Plus will be much faster, therefore you will need to wipe off excess fairly quickly.
- As your towel saturates, you will want to switch to a new towel.
- Pro Plus benefits include:
-
Opti-Coat RV & Marine is a ceramic clear coating with superior resistance to scratching (9H), chemical etching, fading due to UV, and provides outstanding release properties. Opti-Coat RV & Marine pre-polymer cross links and forms a continuous protective film on the painted gel coat surfaces it is applied to, similar to a single component isocyanate that forms a clear coat finish. Opti-Coat RV & Marine has better chemical resistance, scratch & mar resistance, and release properties than any paint coating in use. It provides permanent protection for all modern factory paints and gel coats and can also be used to protect metal and hard plastic surfaces. This is for professional installers and includes (1) 30cc syringe of Opti-Coat RV & Marine. This is not warrantied.Opti-Coat RV & Marine Care Guide
WASHING For best results, wash with Opti-Coat No Rinse on a monthly basis at a minimum to avoid excessive contamination build up on the surface. Avoid washing your Boat or RV in direct sunlight if possible. Heated panels will cause drying and possibly leave streaks and water spotting on the surface. If this is not an option, then wash and dry one panel at a time for best results. Wash the cleanest panels first. Leave the dirtiest panels for last to avoid cross contamination. Usually this involves starting from the top panels and followed by the lower ones. DRYING Always dry your RV or Boat completely and never allow it to air dry. Tap water contains minerals. When the water evaporates, these minerals are deposited on the surface creating water spots. As the minerals harden with heat, they can be extremely difficult to remove from the surface. SPOT REMOVAL OF SURFACE CONTAMINATION Never use abrasive products to polish the coating or to remove surface contamination. Never use excessive rubbing or force to remove spot contamination. Surface contamination such as tar and other contaminants should be removed as soon as possible to avoid temporary staining of the coating and/or hardening on the surface requiring professional removal. For assistance with contamination removal or maintenance standards and techniques, contact your Opti-Coat Marine & RV dealer for professional advice. -
Optimum Corded Rotary RP3000 Optimum Rotary Polisher RP3000 110V Includes 6" Backing Plate Optimum Rotary Polisher RP3000 is perfect for tackling any polishing job in minimal amount of time. With traditional corded power and a 6" backing plate, it has the power you need in a rotary polisher to handle even the toughest jobs. -
Opti-Coat RV & Marine is a ceramic clear coating warrantied for up to 5 years with superior resistance to scratching (9H), chemical etching, fading due to UV, and provides outstanding release properties. Opti-Coat RV & Marine pre-polymer cross links and forms a continuous protective film on the painted gel coat surfaces it is applied to, similar to a single component isocyanate that forms a clear coat finish. Opti-Coat RV & Marine has better chemical resistance, scratch & mar resistance, and release properties than any paint coating in use. It provides permanent protection for all modern factory paints and gel coats and can also be used to protect metal and hard plastic surfaces. This is the warranty package for professional installers and includes (1) 30cc syringe of Opti-Coat RV & Marine and (1) 17 oz. Optimum Paint Prep. MRP: $100 per linear ft.Opti-Coat RV & Marine Care Guide
WASHING For best results, wash with Opti-Coat No Rinse on a monthly basis at a minimum to avoid excessive contamination build up on the surface. Avoid washing your Boat or RV in direct sunlight if possible. Heated panels will cause drying and possibly leave streaks and water spotting on the surface. If this is not an option, then wash and dry one panel at a time for best results. Wash the cleanest panels first. Leave the dirtiest panels for last to avoid cross contamination. Usually this involves starting from the top panels and followed by the lower ones. DRYING Always dry your RV or Boat completely and never allow it to air dry. Tap water contains minerals. When the water evaporates, these minerals are deposited on the surface creating water spots. As the minerals harden with heat, they can be extremely difficult to remove from the surface. SPOT REMOVAL OF SURFACE CONTAMINATION Never use abrasive products to polish the coating or to remove surface contamination. Never use excessive rubbing or force to remove spot contamination. Surface contamination such as tar and other contaminants should be removed as soon as possible to avoid temporary staining of the coating and/or hardening on the surface requiring professional removal. For assistance with contamination removal or maintenance standards and techniques, contact your Opti-Coat Marine & RV dealer for professional advice. MRP: $100.00 per linear foot -
Sale!
RETAIL: 379.00 SALE PRICE: 349.99 The new Zentool ZEN-15E2 Dual Action Polisher represents one of the latest advancements in machine polishing technology with its 15mm orbit considered amongst many detailers to be the ideal balance between cutting and finishing ability. With an orbit (throw) of 15mm, the dual action polisher has evolved to become a leader in efficient cutting power while still maintaining the safe operation expected from a DA polisher. The Zentool ZEN-15E2 is powered by a new, highly efficient 600W motor that produces the torque required to quickly remove heavy paint defects while maintaining the lowest noise levels and smoothest action you will find on a dual action polisher! The ZEN-15E2 is manufactured using only the highest quality parts including CNC machined counter weight system for precision weight and perfect balance and thick 12 foot power cord. The backing plate features ventilated cooling channels to help reduce heat transfer and the machine also includes an easy access panel for services and replacing carbon brushes. Includes 5 inch backing plate. Power: 600W Orbit: 15mm Backing Plate: 125mm/5 inches Warranty: 1 year against manufacturing defects. -
The new more powerful, smoother, and quieter Optimum DA21EM3 Dual Action Polisher represents one of the latest advancements in machine polishing technology. With 1,100 Watt of power, it cuts faster, runs smoother and much quieter than any other orbital polisher with an orbit (throw) of 21mm, this dual action polisher has evolved to become a leader in efficient cutting power while still maintaining the safe operation expected from a DA polisher. The new Optimum DA21EM3 is powered by a new, highly powerful and efficient motor that produces the torque required to quickly remove heavy paint defects while maintaining the lowest noise levels and smoothest action you will find on a dual action polisher! The new Optimum DA21EM3 is manufactured using only the highest quality parts. The backing plate features ventilated cooling channels to help reduce heat transfer and the machine also includes an easy access panel for services and replacing carbon brushes. -
Optimum CMP001 Cordless Mini DA/Rotary Polisher includes 2 Battery Packs and a Charger, 1" and 2" backing plates, 14 pads and a carrying case. Optimum Cordless DA/Rotary Mini Polisher is designed to work on intricate parts of cars, motorcycles, and hard to reach areas. It has three operating modes, rotary, 1mm throw DA and 3mm throw DA. It includes 1" and 2" backing plates, two extensions for hard-to-reach areas and an assortment of fourteen pads in foam, wool, 1" and 2" sizes. This is a must have tool when more precision is required than possible with larger polishers. -
Optimum DAC21E3 Cordless Dual Action Polisher includes 3 Battery Packs and Two Chargers, 6" backing plate and a carrying case Optimum Cordless DAC21E3 DA Polisher is your workhorse polisher unplugged. It comes equipped with 3 battery packs and two chargers for continuous all day operation to tackle any polishing project with great results and in a minimal amount of time without the hassle of cords. This is your new go-to 21MM DA polisher. -
Optimum RPC3000 Cordless Rotary Polisher includes 3 battery packs, two chargers, 6" backing plate and a carrying case Optimum Cordless RPC3000 Rotary Polisher gives you the cut and power you need in a rotary polisher without the cord. It comes equipped with 3 battery packs and two chargers for continuous all-day operation to tackle any polishing project with great results and in a minimal amount of time without the hassle of a cord.