-
Opti-Coat® Slip Solution is designed to be used with Opti-Coat® Paint Protection Film for The Ultimate™ bonding and ease of installation. The 4 oz. concentrate makes 8 gallons of Ready to Use Slip Solution. ● Easy to use. ● Highly concentrated formula. Use 0.5 oz. per gallon. ● Environmentally friendly. ● Contains no petroleum based products. ● No lotions, wax or additives. ● Eliminates the need for alcohol. ● Allows time to adhere. DIRECTIONS Use on a cool car, preferably in a controlled environment. 1. Mix 0.5 Slip Solution concentrate into 1 gallon of distilled or tap water. 2. Spray diluted Slip Solution liberally on the surface of vehicle and on the Opti-Coat® PPF. 3. Keep the film lubricated during installation. 4. If you need to reposition the film, apply Slip Solution liberally to keep the vehicle surface and film fully lubricated. KEEP FROM FREEZING -
Opti-Coat RV & Marine is a ceramic clear coating warrantied for up to 5 years with superior resistance to scratching (9H), chemical etching, fading due to UV, and provides outstanding release properties. Opti-Coat RV & Marine pre-polymer cross links and forms a continuous protective film on the painted gel coat surfaces it is applied to, similar to a single component isocyanate that forms a clear coat finish. Opti-Coat RV & Marine has better chemical resistance, scratch & mar resistance, and release properties than any paint coating in use. It provides permanent protection for all modern factory paints and gel coats and can also be used to protect metal and hard plastic surfaces. This is the warranty package for professional installers and includes (1) 30cc syringe of Opti-Coat RV & Marine and (1) 17 oz. Optimum Paint Prep. MRP: $100 per linear ft.Opti-Coat RV & Marine Care Guide
WASHING For best results, wash with Opti-Coat No Rinse on a monthly basis at a minimum to avoid excessive contamination build up on the surface. Avoid washing your Boat or RV in direct sunlight if possible. Heated panels will cause drying and possibly leave streaks and water spotting on the surface. If this is not an option, then wash and dry one panel at a time for best results. Wash the cleanest panels first. Leave the dirtiest panels for last to avoid cross contamination. Usually this involves starting from the top panels and followed by the lower ones. DRYING Always dry your RV or Boat completely and never allow it to air dry. Tap water contains minerals. When the water evaporates, these minerals are deposited on the surface creating water spots. As the minerals harden with heat, they can be extremely difficult to remove from the surface. SPOT REMOVAL OF SURFACE CONTAMINATION Never use abrasive products to polish the coating or to remove surface contamination. Never use excessive rubbing or force to remove spot contamination. Surface contamination such as tar and other contaminants should be removed as soon as possible to avoid temporary staining of the coating and/or hardening on the surface requiring professional removal. For assistance with contamination removal or maintenance standards and techniques, contact your Opti-Coat Marine & RV dealer for professional advice. MRP: $100.00 per linear foot -
Optimum Opti-Lens Coating is the most advanced polymer system that is specifically designed for the protection of headlight lenses. This hybrid resin is a combination of Opti-Coat ceramic resin and an acrylic resin for maximum bonding and protection of acrylic and polycarbonate lenses. Additionally Optimum Opti-Lens Coating contains high levels of UV absorbers to minimize discoloration and fading of automotive headlight lenses. Optimum Opti-Lens Coating is highly concentrated. Once applied, Optimum Opti-Lens Coating will form a permanent bond to the surface and can only be removed by polishing or paint removers. 30 cc Directions: 1. Clean headlights with 15% IPA solution to remove any oils, waxes, or sealants. 2. Remove all the oxidation by sanding and then polishing the headlights with Optimum Polish II or Optimum Hyper Polish. 3. Wipe down the entire lens with a clean damp microfiber towel to remove any polishing residue. 4. Prime the applicator pad by making an X pattern across the pad. Only a few drops will be needed per headlight lens. 5. Wipe Optimum Opti-Lens Coating on the headlight lens in a circular or back and forth direction. 6. Within 5 minutes, inspect the headlight with adequate lighting looking for any thick areas that have not flashed away to clear. 7. Use the foam applicator or an Optimum Multi-Surface Microfiber Towel to wipe down and remove any excess. (Previous product code was OLC2013-30) -
Opti-Coat Pro Banner printed on heavy vinyl stock, 32" x 78" with pull-up display stand -
The Ultimate Protection for Your Paint Upon receipt of your order, we will contact you with the full cost of shipping, minus the flat fee charged in our online store. Keep your vehicle in pristine condition with Opti-Coat Ultra Paint Protection Film (PPF). It's the ultimate barrier against chips, scratches, and minor impacts. How does it work? Stones, tree branches, and sharp objects are just a few of the daily driving hazards that can damage your paint. Opti-Coat Ultra PPF is an 8 mil, optically clear film, digitally cut to custom fit your car and then professionally applied to protect your painted surface. It works in complete synergy with Optimum Professional coatings and products. Protection That Suits You You can choose your level of protection from partial hood and fenders to complete coverage. No matter which level of protection you choose, we can always customize it to suit your vehicle. Why Opti-Coat Ultra PPF? • Glossy Finish • Hydrophobic (Advanced water repelling properties) • Anti-Contamination (Easy to remove contaminants) • Fast Recovery (by heat or hot water) • Stain Resistant Easy to install, hydrophobic, self healing paint protection film with a gloss finish. Opti-Coat Ultra PPF is warrantied for 10 years against delamination, yellowing, bubbling and cracking. To order Pre-Cut Opti-Coat Ultra PPF or inquire about our Opti-Coat PPF Software, please contact us at (901) 363-4955 or info@opticoat.com You will be responsible for the full cost of shipping. We will contact you once you order. -
The Opti-Coat Shelving Unit Combo comes with one case of all our Maintenance Line products! Bundled for your savings! The Opti-Coat Shelving Unit is a custom POP display design that gets attention and helps sell your product. It has been designed and built with top of the line quality and craftsmanship. Perfect for the Opti-Coat Maintenance Line of products, this unit is easy to assemble and comes with full instructions. The display is made of 5/8" engineered wood with a vinyl laminate finish and 1/8" MDF. Graphics are printed on exterior grade PVC vinyl using solvent based inks. These materials give long term wear and durability maintaining the look and strength for many years especially in the indoor environment. Hardware included. Combo includes:- 1 Opti-Coat Shelving Unit
- 1 Case - Opti-Coat Fabric Clean & Protect 16oz
- 1 Case - Opti-Coat Ferrex 16oz
- 1Case - Opti-Coat Hyper Seal 16oz
- 1 Case - Opti-Coat MDR 16oz
- 1 Case - Opti-Coat M-Wash 16oz
- 1 Case - Opti-Coat No Rinse 16oz
- 1 Case - Opti-Coat Glass Clean & Protect 16oz
- 1 Case - Opti-Coat Power Clean 16oz
- 1 Case - Opti-Coat Protectant Plus 16oz
- 1 Case - Opti-Coat Tire Gel 16oz
- 1 Case - The Ultimate Drying Towel
- 1 Case - Big Gold Sponge
-
Sale!
SALE ! ! !
The Opti-Coat Shelving Unit is a custom POP display design that gets attention and helps sell your product. It has been designed and built with top of the line quality and craftsmanship. Perfect for the Opti-Coat Maintenance Line of products, this unit is easy to assemble and comes with full instructions. The display are made of 5/8" engineered wood with a vinyl laminate finish and 1/8" MDF. Graphics are printed on exterior grade PVC vinyl using solvent based inks. These materials give long term wear and durability maintaining the look and strength for many years especially in the indoor environment. Hardware included. Dimensions:73" H x 25" W x 16" D Shipping: Upon receipt of your order, we will contact you for the full cost of shipping. This product does not qualify for flat fee shipping. Packaging: 64 x 19 x 4, 62 lbs. per unit. -
Opti-Guard Interior Coatings Banner printed on heavy vinyl stock, 32" x 78" with pull-up display stand. -
Opti-Coat PPF Brochures are available in packs of 100 each. -
The Ultimate Protection for Your Paint Upon receipt of your order, we will contact you with the full cost of shipping, minus the flat fee charged in our online store. Keep your vehicle in pristine condition with Opti-Coat Paint Protection Film (PPF). It's the ultimate barrier against chips, scratches, and minor impacts. How does it work? Stones, tree branches, and sharp objects are just a few of the daily driving hazards that can damage your paint. Opti-Coat PPF is an 8 mil, optically clear film, digitally cut to custom fit your car and then professionally applied to protect your painted surface. It works in complete synergy with Optimum Professional coatings and products. Protection That Suits You You can choose your level of protection from partial hood and fenders to complete coverage. No matter which level of protection you choose, we can always customize it to suit your vehicle. Why Opti-Coat Film? • Won't yellow, peel or crack. • Optically clear • Easy to clean • Easy to remove • Works with Opti-Coat coatings • Starts clear and stays clear! Opti-Coat PPF is warrantied for 7 years against delamination, yellowing, bubbling and cracking. To order Pre-Cut Opti-Coat PPF or inquire about our Opti-Coat PPF Software, please contact us at (901) 363-4955 or info@opticoat.com You will be responsible for the full cost of shipping. We will contact you once you order.
-
Opti-Lens Coatings Banner printed on heavy vinyl stock, 32" x 78" with pull-up display stand.
