• Opti-Coat® MDR (Mineral Deposit Remover) is the most advanced cleaner that dissolves and removes mineral deposits and other contaminants from exterior automotive surfaces. It is a non-abrasive chemical cleaner that will dissolve and remove water based contaminants without the need to polish or abrade the surface. 16 oz. size
  • Zentool Backing Plates are designed to work specifically with Zentool 21mm DA Polishers.. Additionally they are perforated to allow air to circulate through the Optimum Foam and Wool Pads and through the polisher. This air movement will keep paint, pad, and polisher cooler which will improve the performance and the results. Additionally the lower temperatures will make your polisher and pads last longer and prevent paint from being damaged due to excessive heat and shear. Zentool Backing Plates are available for both old and new model Zentool 21mm DA Polishers. Please order by size and polisher model number.
  • Hyper Wool Rotary

    $20.99$24.99
    Optimum's Hyper Wool Rotary Pad is designed for maximum cutting and user comfort. With its integrated foam interface, the Hyper Wool Rotary Pad allows the 1 1/4" thick 4 ply tufted wool cutting surface to conform better to contours and run cooler. The unique integrated interface of the Hyper Wool Rotary Pad also makes for a better user experience with reduced vibration and precision control. Available in both 6 and 8-inch diameters with a centering hole the Hyper Wool Rotary Pad will quickly become your go-to rotary cutting pad.
  • Opti-Coat® Fabric Clean & Protect cleans away grease stains and spills from fabric and carpet surfaces while leaving behind a polymetric protectant to maintain your Opti-Guard Protection. Opti-Coat® Fabric Clean & Protect contains substantive polymers that trap and remove dirt and grime while bonding to the fabric to protect the surface from contaminants. 
    • A powerful cleaner that is also safe for carpet
    • Has built-in polymers that provide protection afterward
    • No diluting necessary
      Directions: Vacuum floor matt to get out loose dirt. Spray Opti-Coat Fabric Clean & Protect onto carpet liberally and brush. If using a carpet extractor or steamer proceed to steam or extract carpet. Vacuum after and let dry totally.   Orders in case quantity will be responsible for full cost of shipping and are not eligible for flat fee shipping. We will contact you with the full cost once the order has been placed.        
  • Hyper Wool Foam

    $12.99$23.99
    Optimum Hyper™Wool Foam Pad is the first and only hybrid wool pad of its kind that can be used with a DA polisher to remove 1,000 or finer wet sanding marks. Therefore the combination of Zentool DA Polisher and Optimum Hyper™Wool Foam Pad provides results that could only be achieved by rotary polishers and twisted wool pads in the past! The advantages of Optimum Hyper™Wool Foam Pad with Zentool DA Polisher is a greater cut than rotary buffers with minimal marring and no swirl marks. Directions: To remove 1,000 grit or finer sanding marks spray Optimum Hyper™ Compound on the Optimum Hyper™Wool Foam Pad using Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. This combination will remove (not hide) scratches after 1-2 passes and leave a finish with minor marring that is free of swirl marks. Follow up with Optimum Hyper Polish and Optimum Black Waffle Foam Pad to refine the paint surface before applying Optimum Car Wax.
  • Opti-Coat® Tire Gel is a water-based VOC free tire dressing with high gloss and excellent durability. It can be used to protect and dress tires, wheel wells, interior and exterior plastic trim wherever a high gloss finish is desired. Opti-Coat® Tire Gel also protects these surfaces from ozone, UV and oxidation. 16 oz. size
  • Optimum Orange Waffle Foam Pad is a great one step cutting pad that can be used with Zentool DA Polisher to remove 2,000 or finer wet sanding marks and deep scratches and swirl marks in one or two passes. The waffle design as well as the breathable backing plate of Zentool DA Polisher keeps the surface cool to avoid burnishing the paint that is caused by over-heating the surface. Directions: To remove 2,000 grit or finer sanding marks spray Optimum Hyper™ Compound on the Optimum Orange Waffle Foam Pad using Zentool DA Polisher at speed of 3-4 or a rotary buffer at 600-1000 RPM. This combination will remove (not hide) scratches after 1-2 passes and leave a finish with minor marring that is free of swirl marks. By reducing the pressure on the pad, you can remove the swirl marks as you are finishing down. Follow up with Optimum Hyper Polish and Optimum Black Waffle Foam Pad to refine the paint surface before applying Optimum Car Wax.
  • Opti-Coat® Protectant Plus cleans, restores and protects leather, vinyl and plastic surfaces leaving a natural satin matte finish.  Opti-Coat® Protectant Plus contains a balance of cleaners, penetrating oils and UV inhibitors that retain the original color of these surfaces and protect against sun damage. 16 oz. size
  • Opti-Coat® Power Clean™ is The Ultimate™ multi-surface cleaner for any cleaning application! Opti-Coat® Power Clean™ is a revolutionary product that is formulated utilizing special polymers and emulsifiers to safely clean all automotive surfaces. It is environmentally friendly, safe for the user, and can be diluted to suit any cleaning job.  Use it at full strength for the toughest dirt and grime, or dilute anywhere from 3 parts water to 1 part Power Clean to as much as 10:1. 16 oz. size
  • Opti-Coat® M-Wash™ is designed to clean the toughest automotive grime. With regular use, the added fluoropolymers will repel airborne heavy metal pollution and maintain the coated surface free of bonded contamination. The rich foaming lather traps dirt and grime and rinses with cold water leaving a smooth, clean surface behind.   16 oz. size
  • Opti-Coat T-Shirt

    $17.99$19.99
    Optimum Opti-Coat Pro T-Shirt is made of 100% cotton and comes in black with the Opti-Coat Pro logo on front and back. Available in Small, Medium, Large, X-Large & XX-Large
  • Optimum White Waffle Foam Pad is a firm medium cutting pad:
    • Ideal pad to use for soft black paints
    • Designed to be used with the Zentool DA polisher
    • Waffle design and permeable velcro means more air flow and better cooling
      Directions: To remove 2,000 grit or finer sanding marks spray Optimum Hyper™ Compound on the Optimum White Waffle Foam Pad using Zentool DA Polisher at speed of 3-4 or a rotary buffer at 600-1000 RPM. This combination will remove (not hide) scratches after 1-2 passes and leave a finish with minor marring that is free of swirl marks. By reducing the pressure on the pad, you can remove the swirl marks as you are finishing down. Follow up with Optimum Hyper Polish and Optimum Black Waffle Foam Pad to refine the paint surface before applying Optimum Car Wax.    
Go to Top