-
The Grit Guard Insert is solvent resistant and durable. It stands 2 ½” off the bottom of the bucket and measures 10 3/8” diameter, perfect for any 12” diameter bucket. The Grit Guard Insert takes the grit out of your mitt for safer, swirl-free washing. This inexpensive item can save you countless hours and dollars spent removing swirls. Available in Black, Blue, Gray, Red, White, and Yellow -
- Ready to use formula! Just spray on, wipe off and enjoy!
- Both a cleaner and a protectant. Will provide water repellancy properties after using
- Can be used to boost Optimum Glass Coating
- Not for use on interior glass
-
Optimum Tire Shine is a water-based, solvent-free, and VOC free formula that provides great shine to tires and vinyl surfaces. While Optimum Tire Shine can be easily sprayed, it has great cling to keep it on the tires. When applied properly, it provides great gloss for tires that lasts a few weeks with no slinging issues. Tire manufacturers recommend against solvent-based tire dressings since solvents can penetrate the tire and leach out and remove its protective UV and ozone components. This will cause yellowing and premature cracking and failure of tires according to the tire manufacturers. Optimum Tire Shine has no chemical solvents and therefore will not cause damage to the tires. Furthermore, Optimum Tire Shine contains the same UV and Ozone protectants that are used in the manufacturing of tires for additional protection against the elements. Optimum Tire Shine contains no chemical solvents or other environmentally hazardous compounds. Optimum Tire Shine contains no VOCs and only the finest methicones that are safe for tires, the consumer, and the environment. -
Opti-Coat® MDR (Mineral Deposit Remover) is the most advanced cleaner that dissolves and removes mineral deposits and other contaminants from exterior automotive surfaces. It is a non-abrasive chemical cleaner that will dissolve and remove water based contaminants without the need to polish or abrade the surface. 16 oz. size -
Optimum Intensive Polish is a fast cutting polish that leaves a great finish in one step in most cases. It works as a compound with a wool pad that removes 2,000 grit or lighter wet sanding marks, and a medium polish with a polishing pad that can finish in one step. Just like all Optimum polishes, Optimum Intensive Polish is extremely easy to use and has a long working time with no dusting or sling issues. Its spray application minimizes the chance of overloading or gumming up the pad, and it provides an even application. Optimum Intensive Polish easily wipes off with a damp microfiber towel, whether you use it in the sun or shade, to achieve outstanding results. Optimum Intensive Polish works quickly to remove (not hide) swirl marks, scratches, and other blemishes, while creating a perfect shine on all types of paint. By spraying the polish onto a buffing pad, you can effectively prime the entire pad with minimal amount of product. Therefore you are using the entire pad to polish the paint and achieve better results in less time than a conventional polish. Optimum Intensive Polish has excellent workability on painted surfaces and will not clog buffing pads. Aggressive enough for paint correction and swirl removal, yet the shine, clarity, and gloss of the paint left behind requires only final protection in most cases. Directions: To remove 2,000 grit or finer sanding marks spray Optimum Intensive Polish on the Optimum Wool Pad using Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. To remove lighter scratches and swirl marks, spray Optimum Intensive Polish on the orange waffle or black waffle foam pad using Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. 1. Shake Well. 2. Use 2-3 sprays initially to prime the pad. After the initial priming, use only two sprays per panel. There is no need to apply additional product since Optimum Intensive Polish has a long working time and will continue on working to remove the scratches. 3. Use light to medium pressure on the buffer until desired results are achieved. 4. Wipe off residue with a dampened microfiber towel. 5. On softer clears, follow up with Optimum Hyper Polish to refine the paint surface before applying Optimum Car Wax. Optimum Intensive Polish is bodyshop safe and meets all VOC regulations. -
Optimum Blue Waffle Foam Pad is a great finishing pad that can be used with Zentool DA Polisher to remove minor marring and light scratches and swirl marks in one or two passes. The waffle design as well as the breathable backing plate of Zentool DA Polisher keeps the surface cool to avoid burnishing the paint that is caused by over-heating the surface. Optimum Blue Waffle Foam Pad can be used on the softest paints to create a perfect finish with least amount of effort Directions: Spray Optimum Hyper Polish on the Optimum Blue Waffle Foam Pad as the final step in your polishing process to create a finish with unsurpassed gloss and clarity. Follow up with Optimum Car Wax or Opti-Seal for the final protection. -
BUY ONE, GET ONE FREE. PUT ONE IN YOUR CART AND WE WILL SEND AN EXTRA IN YOUR ORDER.
You do not need to put two in your cart.
Optimum Hyper™ Compound is the first and only spray compound in the marketplace that can remove 1,000 grit and deep scratches in seconds while creating a great finish. Optimum Hyper™ Compound was designed for professional detailers and auto body shops to cut through wet sanding marks and deep scratches in one or two passes. Optimum Hyper™ Compound offers all the advantages of Optimum line of polishes with long working time and low to no dusting.
The spray on application provides ease of use and reduces the amount of product needed to a fraction of the traditional products. 2-3 sprays is enough to cover the entire pad making the whole pad do the cutting and eliminating dry buffing. The minor swirls left after using Optimum Hyper™ Compound can easily be removed with the Optimum™ Hyper Polish. Optimum Hyper™ Compound has a long working time to allow complete paint correction with one application. The residue is easily wiped off with a dry or damp microfiber towel. Optimum Hyper™ Compound contains no silicone oils or wax, so it is completely body shop safe.
Optimum Hyper™ Compound can be used at any speed on your polisher with a wool or foam pad. When using a wool buffing pad, the compound will remove 1000 grit sand scratches and lighter using an Optimum Hyper™Wool Foam Pad with Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. Faster buffing speed is not needed with this product. When using a medium or heavy cut foam pad, the compound will remove 2,000 sand scratches and lighter with Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. The compound works more or less aggressively depending on the pad you choose.
Directions:
To remove 1,000 grit or finer sanding marks spray Optimum Hyper™ Compound on the Optimum Hyper™Wool Foam Pad using Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. To remove lighter scratches and swirl marks, spray Optimum Hyper™ Compound on an orange waffle or black waffle foam pad using Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM.
1. Shake Well.
2. Use 2-3 sprays initially to prime the pad. After the initial priming, use two sprays per panel. There is no need to apply additional product since Optimum Hyper™ Compound has a long working time and will continue on working to remove the scratches.
3. Use light to medium pressure on the buffer until desired results are achieved.
4. Wipe off residue with a dampened microfiber towel. Follow up with Optimum Hyper Polish to refine the paint surface before applying Optimum Car Wax. -
The New & Improved Opti-Guard Fabric creates a more stain resistant and water repellent coating to protect fabric seats, carpets, and other textile surfaces. When liquids come in contact with Opti-Guard Fabric, the surface repels the substance without penetrating or staining the material. The New & Improved Opti-Guard Fabric forms a strong bond with the fibers to prevent removal during cleaning. This is the Opti-Guard Fabric stand-alone product for professional application and does not include a warranty. -
The Optimum Microfiber Cutting Pad is the most advanced cutting pad in the marketplace. It is designed to be used with any rotary or dual action polisher to provide excellent cut and great finish. The advanced microfiber material removes paint defects quickly leaving a great finish behind. The thick foam keeps the pad and paint cooler to create better results while increasing the life of the pad. The Optimum Microfiber Cutting Pad can be used with any polish via any rotary or dual action polisher to provide great cut and a great finish. For best results, use the Optimum Microfiber Cutting Pad with Optimum Compound or Optimum Hyper Compound to remove deep scratches and heavy swirl marks. -
Professional grade 380 gsm Minx Edgeless Microfiber All-Purpose Detailing Towel. Super soft! Super absorbent! Lint Free Non Abrasive Absorbent No Tags Extremely durable Towel softness increases with each washing! Machine wash with mild liquid detergent (free of dyes, fragrance, bleach & softeners). Tumble dry low and do NOT iron. Do NOT use any fabric softener. Do NOT use chlorine bleach. Wash only with other non-linting materials. No cotton. -
PRO3- Benefits include:
- Better than any coating in terms of depth, gloss, scratch resistance, and hydrophobic properties.
- 4x thicker than Pro/Pro+
- Pro 3 Base Coat is a Silicon Carbide resin.
- Pro3 Top Coat is a hybrid.
- Only available to Exclusive Authorized Installers.
- Opti-Coat Pro3 packs will include (1) 20cc of Opti-Coat Pro3 and (1) 20 cc of the Top Coat in every warranty box .
- What you need to know:
- Top Coat should be applied over Opti-Coat Pro3 within 30-45 minutes Pro3 application.
- Total Time: 2-3 hours, 4 layers. No time between layers. Back to back.
- Curing is very similar to Pro & Pro+ however Pro3 is easier to apply!
- You will be provided with a blue foam applicator and a microsuede applicator. Use whichever works best for you. You will find your own preference.
- Limited Lifetime
- Required yearly maintenance
- Cost: $350 minimum which includes a $50 admin fee.
- Includes decontamination wash, clay/MDR, polish off scratches
- If they do not have their yearly check in the warranty reverts to 7 years.
- Document on how to do a maintenance will be provided.
- Benefits include:
-
The Optimum Microfiber Polishing Pad is the most advanced polishing pad in the marketplace. It is designed to be used with any rotary or dual action polisher to provide excellent cut and excellent finish. The advanced microfiber material removes paint defects quickly leaving an excellent finish behind. The thick foam keeps the pad and paint cooler to create better results while increasing the life of the pad. The Optimum Microfiber Polishing Pad can be used with any polish and any rotary or dual action polisher to provide great cut and a great finish. For best results, use the Optimum Microfiber Polishing Pad with Optimum Polish or Optimum Hyper Polish to remove light scratches and swirl marks.