-
Opti-Guard Leather creates a hydrophobic coating to protect coated leather and vinyl surfaces from premature aging, cracking and other damage such as color transfer and staining. Opti-Guard Leather is manufactured using a hubrid ceramic and acrylic resins that allows a strong, flexible coating for these softer surfaces with complete protection from UV damage. Opti-Guard Leather is resistant to chemicals providing multi-year protection which is unheard of for leather coatings. It contains special matting agents to maintain the original factory appearance of the surfaces it is applied to. Apply Opti-Guard Leather to leather seats, vinyl dashboards, leather and vinyl trim pieces for complete protection inside and out. Opti-Guard Leather should not be used on Tanned Leather surfaces. Opti-Guard Fabric is included for carpets and fabric. This is the Opti-Guard Leather Warranty Pack for professional application and includes the warranty. MRP: $599.00 -
Opti-Trim Plastic Restoration & Protection Banner printed on heavy vinyl stock, 32" x 78" with pull up stand, -
Opti-Lens Coatings Banner printed on heavy vinyl stock, 32" x 78" with pull-up display stand. -
Opti-Guard Interior Coatings Banner printed on heavy vinyl stock, 32" x 78" with pull-up display stand. -
Opti-Coat Pro Banner printed on heavy vinyl stock, 32" x 78" with pull-up display stand -
New Revision 5 Hyper Compound Available! The new Optimum Hyper™ Compound Revision #5 has the fastest cut while finishing like a polish and works much better than any other compound. Optimum Hyper™ Compound is the first and only spray compound in the marketplace that can remove 1,000 grit and deep scratches in seconds while creating a great finish. Optimum Hyper™ Compound was designed for professional detailers and auto body shops to cut through wet sanding marks and deep scratches in one or two passes. Optimum Hyper™ Compound offers all the advantages of Optimum line of polishes with long working time and low to no dusting. The spray on application provides ease of use and reduces the amount of product needed to a fraction of the traditional products. 2-3 sprays is enough to cover the entire pad making the whole pad do the cutting and eliminating dry buffing. The minor swirls left after using Optimum Hyper™ Compound can easily be removed with the Optimum™ Hyper Polish. Optimum Hyper™ Compound has a long working time to allow complete paint correction with one application. The residue is easily wiped off with a dry or damp microfiber towel. Optimum Hyper™ Compound contains no silicone oils or wax, so it is completely body shop safe. Optimum Hyper™ Compound can be used at any speed on your polisher with a wool or foam pad. When using a wool buffing pad, the compound will remove 1000 grit sand scratches and lighter using an Optimum Hyper™Wool Foam Pad with Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. Faster buffing speed is not needed with this product. When using a medium or heavy cut foam pad, the compound will remove 2,000 sand scratches and lighter with Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. The compound works more or less aggressively depending on the pad you choose. Directions: To remove 1,000 grit or finer sanding marks spray Optimum Hyper™ Compound on the Optimum Hyper™Wool Foam Pad using Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. To remove lighter scratches and swirl marks, spray Optimum Hyper™ Compound on an orange waffle or black waffle foam pad using Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. 1. Shake Well. 2. Use 2-3 sprays initially to prime the pad. After the initial priming, use two sprays per panel. There is no need to apply additional product since Optimum Hyper™ Compound has a long working time and will continue on working to remove the scratches. 3. Use light to medium pressure on the buffer until desired results are achieved. 4. Wipe off residue with a dampened microfiber towel. Follow up with Optimum Hyper Polish to refine the paint surface before applying Optimum Car Wax. -
The New RV & Marine Polish is a unique and powerful polish that will make quick work of removing oxidation and scratches on gelcoat surfaces such as RVs and Boats and leaves a perfect Finish behind. The rapid leveling will leave the Gelcoat clean and ready for adding protection with Optimum Opti-Seal.
Optimum RV & Marine Polish can be used as a medium to light compound as well as a finishing polish all in one. When used with Optimum DA and Optimum Hyper Wool pad, it will perform as a medium compound. Follow with the Optimum Orange or Black Pad and get a perfect finish with great gloss!
Directions:
1. Shake well before using.
2. Apply 1 to 2 sprays on the pad for each 2 square foot section.
3. Use Optimum DA with medium to heavy pressure for fast cutting, lightening the pressure on the final few passes to create a deeper gloss with no marring.
4. Use a dampened microfiber towel to remove residue. -
Optimum Intensive Polish is a fast cutting polish that leaves a great finish in one step in most cases. It works as a compound with a wool pad that removes 2,000 grit or lighter wet sanding marks, and a medium polish with a polishing pad that can finish in one step. Just like all Optimum polishes, Optimum Intensive Polish is extremely easy to use and has a long working time with no dusting or sling issues. Its spray application minimizes the chance of overloading or gumming up the pad, and it provides an even application. Optimum Intensive Polish easily wipes off with a damp microfiber towel, whether you use it in the sun or shade, to achieve outstanding results. Optimum Intensive Polish works quickly to remove (not hide) swirl marks, scratches, and other blemishes, while creating a perfect shine on all types of paint. By spraying the polish onto a buffing pad, you can effectively prime the entire pad with minimal amount of product. Therefore you are using the entire pad to polish the paint and achieve better results in less time than a conventional polish. Optimum Intensive Polish has excellent workability on painted surfaces and will not clog buffing pads. Aggressive enough for paint correction and swirl removal, yet the shine, clarity, and gloss of the paint left behind requires only final protection in most cases. Directions: To remove 2,000 grit or finer sanding marks spray Optimum Intensive Polish on the Optimum Wool Pad using Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. To remove lighter scratches and swirl marks, spray Optimum Intensive Polish on the orange waffle or black waffle foam pad using Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. 1. Shake Well. 2. Use 2-3 sprays initially to prime the pad. After the initial priming, use only two sprays per panel. There is no need to apply additional product since Optimum Intensive Polish has a long working time and will continue on working to remove the scratches. 3. Use light to medium pressure on the buffer until desired results are achieved. 4. Wipe off residue with a dampened microfiber towel. 5. On softer clears, follow up with Optimum Hyper Polish to refine the paint surface before applying Optimum Car Wax. Optimum Intensive Polish is bodyshop safe and meets all VOC regulations. -
BUY ONE, GET ONE FREE. PUT ONE IN YOUR CART AND WE WILL SEND AN EXTRA IN YOUR ORDER.
You do not need to put two in your cart.
Optimum Hyper™ Compound is the first and only spray compound in the marketplace that can remove 1,000 grit and deep scratches in seconds while creating a great finish. Optimum Hyper™ Compound was designed for professional detailers and auto body shops to cut through wet sanding marks and deep scratches in one or two passes. Optimum Hyper™ Compound offers all the advantages of Optimum line of polishes with long working time and low to no dusting.
The spray on application provides ease of use and reduces the amount of product needed to a fraction of the traditional products. 2-3 sprays is enough to cover the entire pad making the whole pad do the cutting and eliminating dry buffing. The minor swirls left after using Optimum Hyper™ Compound can easily be removed with the Optimum™ Hyper Polish. Optimum Hyper™ Compound has a long working time to allow complete paint correction with one application. The residue is easily wiped off with a dry or damp microfiber towel. Optimum Hyper™ Compound contains no silicone oils or wax, so it is completely body shop safe.
Optimum Hyper™ Compound can be used at any speed on your polisher with a wool or foam pad. When using a wool buffing pad, the compound will remove 1000 grit sand scratches and lighter using an Optimum Hyper™Wool Foam Pad with Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. Faster buffing speed is not needed with this product. When using a medium or heavy cut foam pad, the compound will remove 2,000 sand scratches and lighter with Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. The compound works more or less aggressively depending on the pad you choose.
Directions:
To remove 1,000 grit or finer sanding marks spray Optimum Hyper™ Compound on the Optimum Hyper™Wool Foam Pad using Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. To remove lighter scratches and swirl marks, spray Optimum Hyper™ Compound on an orange waffle or black waffle foam pad using Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM.
1. Shake Well.
2. Use 2-3 sprays initially to prime the pad. After the initial priming, use two sprays per panel. There is no need to apply additional product since Optimum Hyper™ Compound has a long working time and will continue on working to remove the scratches.
3. Use light to medium pressure on the buffer until desired results are achieved.
4. Wipe off residue with a dampened microfiber towel. Follow up with Optimum Hyper Polish to refine the paint surface before applying Optimum Car Wax. -
Optimum FerreX™ is designed to dissolve and remove ferrous oxides from wheels and painted surfaces quickly by bonding and dissolving them away with minimal effort. Furthermore, Optimum FerreX™ will dissolve and remove other surface contaminants such as tar and wax at the same time. Directions for wheels: Avoid using on hot surfaces. Wash wheels to remove excess contaminants. Spray Optimum FerreX™ directly on wheels and allow 1 - 2 minutes to fully dissolve ferrous oxides. Agitate with a soft bristle brush as needed. Rinse off with plenty of water. Directions for painted surfaces: Wash with Optimum No Rinse™ Wash & Shine or Optimum Car Wash before applying Optimum FerreX™. Use on a cool surface and out of direct sunlight. Spray Optimum FerreX™ directly on painted surface and allow 1 - 2 minutes to fully dissolve ferrous oxide. Agitate with a microfiber towel or soft sponge if necessary. Rinse off with plenty of water. -
Opti-Guard Leather creates a hydrophobic coating to protect coated leather and vinyl surfaces from premature aging, cracking and other damage such as color transfer and staining. Opti-Guard Leather is manufactured using a hybrid ceramic and acrylic resins that allows a strong, flexible coating for these softer surfaces with complete protection from UV damage. Opti-Guard Leather is resistant to chemicals providing multi-year protection which is unheard of for leather coatings. It contains special matting agents to maintain the original factory appearance of the surfaces it is applied to. Apply Opti-Guard Leather to leather seats, vinyl dashboards, leather and vinyl trim pieces for complete protection inside and out. Opti-Guard Leather should not be used on Tanned Leather surfaces. Available in 10 cc (enough for 1 car) and 30 cc (enough for 3 cars) syringes. -
Optimum Opti-Trim™ Protect is a clear hybrid resin coating designed to prevent plastic trim from UV damage. Opti-Trim Protect contains a high level of UV absorbers to help prevent fading of plastic trim and maintain the factory appearance. Opti-Trim Protect also contains special dye additives to restore faded and oxidized trim back to a like-new factory appearance. Additionally Opti-Trim Protect helps prevent future fading and provides long term protection. Packaged in 30 cc syringe - enough for 3 - 5 vehicles depending on the amount to be treated.