-
The Ultimate Protection for Your Paint Upon receipt of your order, we will contact you with the full cost of shipping, minus the flat fee charged in our online store. Keep your vehicle in pristine condition with Opti-Coat Matte Paint Protection Film (PPF). It's the ultimate barrier against chips, scratches, and minor impacts. How does it work? Stones, tree branches, and sharp objects are just a few of the daily driving hazards that can damage your paint. Opti-Coat Matte PPF is an 8 mil, optically clear film, digitally cut to custom fit your car and then professionally applied to protect your painted surface. It works in complete synergy with Optimum Professional coatings and products. Protection That Suits You You can choose your level of protection from partial hood and fenders to complete coverage. No matter which level of protection you choose, we can always customize it to suit your vehicle. Why Opti-Coat Matte PPF? • Matte Finish • Hydrophobic (Advanced water repelling properties) • Anti-Contamination (Easy to remove contaminants) • Fast Recovery (by heat or hot water) • Stain Resistant Very smooth, hydrophobic, self healing paint protection film with a matte finish. Opti-Coat Matte PPF is warrantied for 7 years against delamination, yellowing, bubbling and cracking. To order Pre-Cut Opti-Coat Matte PPF or inquire about our Opti-Coat PPF Software, please contact us at (901) 363-4955 or info@opticoat.com -
The Ultimate Protection for Your Paint Upon receipt of your order, we will contact you with the full cost of shipping, minus the flat fee charged in our online store. Keep your vehicle in pristine condition with Opti-Coat Ultra Paint Protection Film (PPF). It's the ultimate barrier against chips, scratches, and minor impacts. How does it work? Stones, tree branches, and sharp objects are just a few of the daily driving hazards that can damage your paint. Opti-Coat Ultra PPF is an 8 mil, optically clear film, digitally cut to custom fit your car and then professionally applied to protect your painted surface. It works in complete synergy with Optimum Professional coatings and products. Protection That Suits You You can choose your level of protection from partial hood and fenders to complete coverage. No matter which level of protection you choose, we can always customize it to suit your vehicle. Why Opti-Coat Ultra PPF? • Glossy Finish • Hydrophobic (Advanced water repelling properties) • Anti-Contamination (Easy to remove contaminants) • Fast Recovery (by heat or hot water) • Stain Resistant Easy to install, hydrophobic, self healing paint protection film with a gloss finish. Opti-Coat Ultra PPF is warrantied for 10 years against delamination, yellowing, bubbling and cracking. To order Pre-Cut Opti-Coat Ultra PPF or inquire about our Opti-Coat PPF Software, please contact us at (901) 363-4955 or info@opticoat.com You will be responsible for the full cost of shipping. We will contact you once you order.
-
The Opti-Coat Shelving Unit Combo comes with one case of all our Maintenance Line products! Bundled for your savings! The Opti-Coat Shelving Unit is a custom POP display design that gets attention and helps sell your product. It has been designed and built with top of the line quality and craftsmanship. Perfect for the Opti-Coat Maintenance Line of products, this unit is easy to assemble and comes with full instructions. The display is made of 5/8" engineered wood with a vinyl laminate finish and 1/8" MDF. Graphics are printed on exterior grade PVC vinyl using solvent based inks. These materials give long term wear and durability maintaining the look and strength for many years especially in the indoor environment. Hardware included. Combo includes:- 1 Opti-Coat Shelving Unit
- 1 Case - Opti-Coat Fabric Clean & Protect 16oz
- 1 Case - Opti-Coat Ferrex 16oz
- 1Case - Opti-Coat Hyper Seal 16oz
- 1 Case - Opti-Coat MDR 16oz
- 1 Case - Opti-Coat M-Wash 16oz
- 1 Case - Opti-Coat No Rinse 16oz
- 1 Case - Opti-Coat Glass Clean & Protect 16oz
- 1 Case - Opti-Coat Power Clean 16oz
- 1 Case - Opti-Coat Protectant Plus 16oz
- 1 Case - Opti-Coat Tire Gel 16oz
- 1 Case - The Ultimate Drying Towel
- 1 Case - Big Gold Sponge
-
The Ultimate Protection for Your Paint Upon receipt of your order, we will contact you with the full cost of shipping, minus the flat fee charged in our online store. Keep your vehicle in pristine condition with Opti-Coat Paint Protection Film (PPF). It's the ultimate barrier against chips, scratches, and minor impacts. How does it work? Stones, tree branches, and sharp objects are just a few of the daily driving hazards that can damage your paint. Opti-Coat PPF is an 8 mil, optically clear film, digitally cut to custom fit your car and then professionally applied to protect your painted surface. It works in complete synergy with Optimum Professional coatings and products. Protection That Suits You You can choose your level of protection from partial hood and fenders to complete coverage. No matter which level of protection you choose, we can always customize it to suit your vehicle. Why Opti-Coat Film? • Won't yellow, peel or crack. • Optically clear • Easy to clean • Easy to remove • Works with Opti-Coat coatings • Starts clear and stays clear! Opti-Coat PPF is warrantied for 7 years against delamination, yellowing, bubbling and cracking. To order Pre-Cut Opti-Coat PPF or inquire about our Opti-Coat PPF Software, please contact us at (901) 363-4955 or info@opticoat.com You will be responsible for the full cost of shipping. We will contact you once you order.
-
Optimum Cordless Rotary RPC3000 Kit (3 batteries & 2 chargers) with 17 oz. Hyper Polish, 17 oz. Hyper Compound, 6.5" Orange Cutting Pad, 6.5" Black Finishing Pad Optimum Cordless RPC3000 Rotary Polisher gives you the cut and power you need in a rotary polisher without the cord. It comes equipped with 3 battery packs and two chargers for continuous all-day operation to tackle any polishing project with great results and in a minimal amount of time without the hassle of a cord. -
Optimum Cordless 21MM DA DAC21E3 Kit (3 batteries & 2 chargers) with 17 oz. Hyper Polish, 17 oz. Hyper Compound, 6.5" Orange Cutting Pad, 6.5" Black Finishing Pad Optimum Cordless DAC21E3 DA Polisher is your workhorse polisher unplugged. It comes equipped with 3 battery packs and two chargers for continuous all day operation to tackle any polishing project with great results and in a minimal amount of time without the hassle of cords. This is your new go-to 21MM DA polisher. -
PRO3- Benefits include:
- Better than any coating in terms of depth, gloss, scratch resistance, and hydrophobic properties.
- 4x thicker than Pro/Pro+
- Pro 3 Base Coat is a Silicon Carbide resin.
- Pro3 Top Coat is a hybrid.
- Only available to Exclusive Authorized Installers.
- Opti-Coat Pro3 packs will include (1) 20cc of Opti-Coat Pro3 and (1) 20 cc of the Top Coat in every warranty box .
- What you need to know:
- Top Coat should be applied over Opti-Coat Pro3 within 30-45 minutes Pro3 application.
- Total Time: 2-3 hours, 4 layers. No time between layers. Back to back.
- Curing is very similar to Pro & Pro+ however Pro3 is easier to apply!
- You will be provided with a blue foam applicator and a microsuede applicator. Use whichever works best for you. You will find your own preference.
- Limited Lifetime
- Required yearly maintenance
- Cost: $350 minimum which includes a $50 admin fee.
- Includes decontamination wash, clay/MDR, polish off scratches
- If they do not have their yearly check in the warranty reverts to 7 years.
- Document on how to do a maintenance will be provided.
- Benefits include:
-
Optimum RPC3000 Cordless Rotary Polisher includes 3 battery packs, two chargers, 6" backing plate and a carrying case Optimum Cordless RPC3000 Rotary Polisher gives you the cut and power you need in a rotary polisher without the cord. It comes equipped with 3 battery packs and two chargers for continuous all-day operation to tackle any polishing project with great results and in a minimal amount of time without the hassle of a cord. -
Optimum DAC21E3 Cordless Dual Action Polisher includes 3 Battery Packs and Two Chargers, 6" backing plate and a carrying case Optimum Cordless DAC21E3 DA Polisher is your workhorse polisher unplugged. It comes equipped with 3 battery packs and two chargers for continuous all day operation to tackle any polishing project with great results and in a minimal amount of time without the hassle of cords. This is your new go-to 21MM DA polisher. -
Optimum CMP001 Cordless Mini DA/Rotary Polisher includes 2 Battery Packs and a Charger, 1" and 2" backing plates, 14 pads and a carrying case. Optimum Cordless DA/Rotary Mini Polisher is designed to work on intricate parts of cars, motorcycles, and hard to reach areas. It has three operating modes, rotary, 1mm throw DA and 3mm throw DA. It includes 1" and 2" backing plates, two extensions for hard-to-reach areas and an assortment of fourteen pads in foam, wool, 1" and 2" sizes. This is a must have tool when more precision is required than possible with larger polishers. -
The new more powerful, smoother, and quieter Optimum DA21EM3 Dual Action Polisher represents one of the latest advancements in machine polishing technology. With 1,100 Watt of power, it cuts faster, runs smoother and much quieter than any other orbital polisher with an orbit (throw) of 21mm, this dual action polisher has evolved to become a leader in efficient cutting power while still maintaining the safe operation expected from a DA polisher. The new Optimum DA21EM3 is powered by a new, highly powerful and efficient motor that produces the torque required to quickly remove heavy paint defects while maintaining the lowest noise levels and smoothest action you will find on a dual action polisher! The new Optimum DA21EM3 is manufactured using only the highest quality parts. The backing plate features ventilated cooling channels to help reduce heat transfer and the machine also includes an easy access panel for services and replacing carbon brushes. -
Sale!
RETAIL: 379.00 SALE PRICE: 349.99 The new Zentool ZEN-15E2 Dual Action Polisher represents one of the latest advancements in machine polishing technology with its 15mm orbit considered amongst many detailers to be the ideal balance between cutting and finishing ability. With an orbit (throw) of 15mm, the dual action polisher has evolved to become a leader in efficient cutting power while still maintaining the safe operation expected from a DA polisher. The Zentool ZEN-15E2 is powered by a new, highly efficient 600W motor that produces the torque required to quickly remove heavy paint defects while maintaining the lowest noise levels and smoothest action you will find on a dual action polisher! The ZEN-15E2 is manufactured using only the highest quality parts including CNC machined counter weight system for precision weight and perfect balance and thick 12 foot power cord. The backing plate features ventilated cooling channels to help reduce heat transfer and the machine also includes an easy access panel for services and replacing carbon brushes. Includes 5 inch backing plate. Power: 600W Orbit: 15mm Backing Plate: 125mm/5 inches Warranty: 1 year against manufacturing defects. -
Opti-Coat RV & Marine is a ceramic clear coating warrantied for up to 5 years with superior resistance to scratching (9H), chemical etching, fading due to UV, and provides outstanding release properties. Opti-Coat RV & Marine pre-polymer cross links and forms a continuous protective film on the painted gel coat surfaces it is applied to, similar to a single component isocyanate that forms a clear coat finish. Opti-Coat RV & Marine has better chemical resistance, scratch & mar resistance, and release properties than any paint coating in use. It provides permanent protection for all modern factory paints and gel coats and can also be used to protect metal and hard plastic surfaces. This is the warranty package for professional installers and includes (1) 30cc syringe of Opti-Coat RV & Marine and (1) 17 oz. Optimum Paint Prep. MRP: $100 per linear ft.Opti-Coat RV & Marine Care Guide
WASHING For best results, wash with Opti-Coat No Rinse on a monthly basis at a minimum to avoid excessive contamination build up on the surface. Avoid washing your Boat or RV in direct sunlight if possible. Heated panels will cause drying and possibly leave streaks and water spotting on the surface. If this is not an option, then wash and dry one panel at a time for best results. Wash the cleanest panels first. Leave the dirtiest panels for last to avoid cross contamination. Usually this involves starting from the top panels and followed by the lower ones. DRYING Always dry your RV or Boat completely and never allow it to air dry. Tap water contains minerals. When the water evaporates, these minerals are deposited on the surface creating water spots. As the minerals harden with heat, they can be extremely difficult to remove from the surface. SPOT REMOVAL OF SURFACE CONTAMINATION Never use abrasive products to polish the coating or to remove surface contamination. Never use excessive rubbing or force to remove spot contamination. Surface contamination such as tar and other contaminants should be removed as soon as possible to avoid temporary staining of the coating and/or hardening on the surface requiring professional removal. For assistance with contamination removal or maintenance standards and techniques, contact your Opti-Coat Marine & RV dealer for professional advice. MRP: $100.00 per linear foot -
Optimum Corded Rotary RP3000 Optimum Rotary Polisher RP3000 110V Includes 6" Backing Plate Optimum Rotary Polisher RP3000 is perfect for tackling any polishing job in minimal amount of time. With traditional corded power and a 6" backing plate, it has the power you need in a rotary polisher to handle even the toughest jobs. -
Opti-Coat RV & Marine is a ceramic clear coating with superior resistance to scratching (9H), chemical etching, fading due to UV, and provides outstanding release properties. Opti-Coat RV & Marine pre-polymer cross links and forms a continuous protective film on the painted gel coat surfaces it is applied to, similar to a single component isocyanate that forms a clear coat finish. Opti-Coat RV & Marine has better chemical resistance, scratch & mar resistance, and release properties than any paint coating in use. It provides permanent protection for all modern factory paints and gel coats and can also be used to protect metal and hard plastic surfaces. This is for professional installers and includes (1) 30cc syringe of Opti-Coat RV & Marine. This is not warrantied.Opti-Coat RV & Marine Care Guide
WASHING For best results, wash with Opti-Coat No Rinse on a monthly basis at a minimum to avoid excessive contamination build up on the surface. Avoid washing your Boat or RV in direct sunlight if possible. Heated panels will cause drying and possibly leave streaks and water spotting on the surface. If this is not an option, then wash and dry one panel at a time for best results. Wash the cleanest panels first. Leave the dirtiest panels for last to avoid cross contamination. Usually this involves starting from the top panels and followed by the lower ones. DRYING Always dry your RV or Boat completely and never allow it to air dry. Tap water contains minerals. When the water evaporates, these minerals are deposited on the surface creating water spots. As the minerals harden with heat, they can be extremely difficult to remove from the surface. SPOT REMOVAL OF SURFACE CONTAMINATION Never use abrasive products to polish the coating or to remove surface contamination. Never use excessive rubbing or force to remove spot contamination. Surface contamination such as tar and other contaminants should be removed as soon as possible to avoid temporary staining of the coating and/or hardening on the surface requiring professional removal. For assistance with contamination removal or maintenance standards and techniques, contact your Opti-Coat Marine & RV dealer for professional advice. -
Optimum Paint Guard™ is a ceramic paint coating designed to protect the paint surface from bird lime, acid etching and other corrosive substances. Optimum Paint Guard™ will produce a harder than factory finish that is noticeably easier to maintain and is more resistant to the paint damage that can occur as a result of daily cleaning processes. Optimum Paint Guard™ will give Authorized Opti-Coat Pro Installers a lower cost alternative for budget minded or short term lease customers. Optimum Paint Guard™ will differentiate the Authorized Opti-Coat Pro Installer from the detailer that is installing Optimum Gloss-Coat. Optimum Paint Guard™ is more chemically resistant than Optimum Gloss-Coat while maintaining Optimum Gloss-Coat’s user friendly nature. Optimum Paint Guard™ comes with a three (3) year warranty credit per 10 cc. The visible results of Optimum Paint Guard™ demonstrates its value and customers see the benefits during washing and maintenance. Optimum Paint Guard™ is only available to authorized installers and is packaged in 10 cc & 30 cc syringes. The application includes at a minimum, washing, decontamination, polishing with Hyper Polish, installation of the coating on all painted surfaces and registration of the warranty. MRP: $499.00 per 10cc -
PRO PLUS- Pro Plus benefits include:
- Higher Gloss
- Additional scratch resistance
- Greater water and dirt repellent
- More protective properties and durability
- The formula is not affected by cleaning chemicals!
- Pro Plus requires twice as much product per car. Therefore, the Opti-Coat Pro Plus packs will include 15 cc of Opti-Coat Pro and 10 cc of the Pro Plus in every warranty box and the cost will be $250.00 per pack effective immediately.
- What you need to know:
- Pro Plus should be applied over Opti-Coat Pro within 30-45 minutes of Pro application. This will make the application much easier and will maximize bonding.
- Wait till 75-80% of the Pro Plus crosslinks and goes clear, then wipe off the excess. The crosslinking of the Pro Plus will be much faster, therefore you will need to wipe off excess fairly quickly.
- As your towel saturates, you will want to switch to a new towel.
- Pro Plus benefits include:
-
Sale!
The new Zentool ZEN-12EM2 Dual Action Polisher is the latest advancements in machine polishing technology. With an orbit (throw) of 12mm, the dual action polisher has evolved to become a leader in efficient cutting power while still maintaining the safe operation expected from a DA polisher. The Zentool ZEN-12EM2 is powered by a new, highly efficient 350W motor that produces the torque required to quickly remove heavy paint defects while maintaining the lowest noise levels and smoothest action you will find on a dual action polisher. The Zentool ZEN-12EM2 is manufactured using only the highest quality parts including CNC machined counter weight system for precision weight and perfect balance and thick 4 meter power cable. The Zentool ZEN-12EM2 mini dual action has a vented 76mm (3") backing plate to operate smaller pads and allow fast correction of tight spaces where larger machines can't operate effectively -
NEW! The Ultimate™ Solution For All Metal Surfaces! Opti-Metal Coat™ is a rapid curing ceramic coating designed to bond to all metal surfaces, to prevent ongoing oxidation and damage during cleaning processes. Opti-Metal Coat™ creates a protective barrier with an extremely strong bond to metal surfaces and high resistance to acids and chemicals. The hydrophobic properties provide easy ongoing maintenance for all automotive, marine, aviation and industrial applications. -
- Opti-Coat Pro Motorcycle is designed specifically for the motorcycle industry and contains both Opti-Coat Pro and Opti-Guard Leather for complete protection of motorcycles.
- 5 cc Opti-Coat Pro
- 5 cc Opti-Metal Coating
- 5 cc Opti-Guard Leather
- 2 oz Opti-Coat Primer
- Microfiber Towel
- Foam Applicator
- Warranty Card
-
New and improved! Optimum Pad Washer is designed to provide clean pads for use with the complete line of Optimum polishes and compounds. Pads cleaned with Optimum No Rinse Wash & Shine in the Optimum Pad Washer will run cooler, cut faster, finish better and last longer. The innovative waste capture system allows for perfect pads every time they are cleaned with only clean solution, not recycled solution. The German engineered positive displacement pump ensures years of dependable service. Optimum Pad Washer performs equally well with dual action machines like the Zentool DA Polisher and the Zentool Mini DA Polisher as well as with traditional rotary polishers. Used to clean foam, wool and microfiber pads the Optimum Pad Washer is sure to become a invaluable part of your detailing tool kit. -
Opti-Coat Pro is a ceramic clear coating warrantied for up to 5 years1 with superior resistance to scratching (9H) which means less scratches over time, chemical etching which means prevents chemical damage to clearcoat , fading due to UV which means the paint system looks vibrant and new, and provides outstanding release properties which means less dirt sticks to the coated surfaces. The Opti-Coat Pro pre-polymer cross links, and forms a continuous protective film on the painted surface it is applied to, similar to a single component isocyanate that forms a clear coat finish with much better properties than the factory clearcoat as described above. Opti-Coat Pro has better chemical resistance than any other automotive paint coating in use which means no damage from the environmental chemicals, better scratch & mar resistance than any other automotive paint coating which means reduced scratching and marring, and better release properties than any other automotive paint coating in use which means less dirt build up between washes. It provides permanent protection for all modern factory paints and can also be used to protect metal and hard plastic surfaces. This is the warranty package for professional installers and includes 2 oz. Opti-Coat Primer. MRP $999.00 The application includes at a minimum, washing, decontamination, polishing with Primer Polish, installation of the coating on all painted surfaces and registration of the warranty. 1 See warranty terms and conditions here: http://opticoat.com/page/warranty-terms -
Sale!
SALE ! ! !
The Opti-Coat Shelving Unit is a custom POP display design that gets attention and helps sell your product. It has been designed and built with top of the line quality and craftsmanship. Perfect for the Opti-Coat Maintenance Line of products, this unit is easy to assemble and comes with full instructions. The display are made of 5/8" engineered wood with a vinyl laminate finish and 1/8" MDF. Graphics are printed on exterior grade PVC vinyl using solvent based inks. These materials give long term wear and durability maintaining the look and strength for many years especially in the indoor environment. Hardware included. Dimensions:73" H x 25" W x 16" D Shipping: Upon receipt of your order, we will contact you for the full cost of shipping. This product does not qualify for flat fee shipping. Packaging: 64 x 19 x 4, 62 lbs. per unit. -
Opti-Guard Fabric creates a stain resistant coating to protect fabric seats, carpets and other textile surfaces. When liquids come in contact with Opti-Guard Fabric, the surface repels the substance without penetrating or staining the material. Opti-Guard Fabric forms a strong bond with the fibers to prevent removal during cleaning. This is the Opti-Guard Fabric Warranty Pack with Opti-Guard Leather for professional application and includes the warranty. Opti-Guard Leather should not be used on Tanned Leather surfaces. MRP: $599.00