-
Optimum Opti-Lens Coating is the most advanced polymer system that is specifically designed for the protection of headlight lenses. This hybrid resin is a combination of Opti-Coat ceramic resin and an acrylic resin for maximum bonding and protection of acrylic and polycarbonate lenses. Additionally Optimum Opti-Lens Coating contains high levels of UV absorbers to minimize discoloration and fading of automotive headlight lenses. Optimum Opti-Lens Coating is highly concentrated. Once applied, Optimum Opti-Lens Coating will form a permanent bond to the surface and can only be removed by polishing or paint removers. 30 cc Directions: 1. Clean headlights with 15% IPA solution to remove any oils, waxes, or sealants. 2. Remove all the oxidation by sanding and then polishing the headlights with Optimum Polish II or Optimum Hyper Polish. 3. Wipe down the entire lens with a clean damp microfiber towel to remove any polishing residue. 4. Prime the applicator pad by making an X pattern across the pad. Only a few drops will be needed per headlight lens. 5. Wipe Optimum Opti-Lens Coating on the headlight lens in a circular or back and forth direction. 6. Within 5 minutes, inspect the headlight with adequate lighting looking for any thick areas that have not flashed away to clear. 7. Use the foam applicator or an Optimum Multi-Surface Microfiber Towel to wipe down and remove any excess. (Previous product code was OLC2013-30) -
Opti-Coat RV & Marine is a ceramic clear coating warrantied for up to 5 years with superior resistance to scratching (9H), chemical etching, fading due to UV, and provides outstanding release properties. Opti-Coat RV & Marine pre-polymer cross links and forms a continuous protective film on the painted gel coat surfaces it is applied to, similar to a single component isocyanate that forms a clear coat finish. Opti-Coat RV & Marine has better chemical resistance, scratch & mar resistance, and release properties than any paint coating in use. It provides permanent protection for all modern factory paints and gel coats and can also be used to protect metal and hard plastic surfaces. This is the warranty package for professional installers and includes (1) 30cc syringe of Opti-Coat RV & Marine and (1) 17 oz. Optimum Paint Prep. MRP: $100 per linear ft.Opti-Coat RV & Marine Care Guide
WASHING For best results, wash with Opti-Coat No Rinse on a monthly basis at a minimum to avoid excessive contamination build up on the surface. Avoid washing your Boat or RV in direct sunlight if possible. Heated panels will cause drying and possibly leave streaks and water spotting on the surface. If this is not an option, then wash and dry one panel at a time for best results. Wash the cleanest panels first. Leave the dirtiest panels for last to avoid cross contamination. Usually this involves starting from the top panels and followed by the lower ones. DRYING Always dry your RV or Boat completely and never allow it to air dry. Tap water contains minerals. When the water evaporates, these minerals are deposited on the surface creating water spots. As the minerals harden with heat, they can be extremely difficult to remove from the surface. SPOT REMOVAL OF SURFACE CONTAMINATION Never use abrasive products to polish the coating or to remove surface contamination. Never use excessive rubbing or force to remove spot contamination. Surface contamination such as tar and other contaminants should be removed as soon as possible to avoid temporary staining of the coating and/or hardening on the surface requiring professional removal. For assistance with contamination removal or maintenance standards and techniques, contact your Opti-Coat Marine & RV dealer for professional advice. MRP: $100.00 per linear foot -
Opti-Guard Fabric creates a stain resistant coating to protect fabric seats, carpets and other textile surfaces. When liquids come in contact with Opti-Guard Fabric, the surface repels the substance without penetrating or staining the material. Opti-Guard Fabric forms a strong bond with the fibers to prevent removal during cleaning. This is the Opti-Guard Fabric Warranty Pack with Opti-Guard Leather for professional application and includes the warranty. Opti-Guard Leather should not be used on Tanned Leather surfaces. MRP: $599.00 -
Optimum Opti-Trim™ Protect is a clear hybrid resin coating designed to prevent plastic trim from UV damage. Opti-Trim Protect contains a high level of UV absorbers to help prevent fading of plastic trim and maintain the factory appearance. Opti-Trim Protect also contains special dye additives to restore faded and oxidized trim back to a like-new factory appearance. Additionally Opti-Trim Protect helps prevent future fading and provides long term protection. Packaged in 30 cc syringe - enough for 3 - 5 vehicles depending on the amount to be treated. -
Opti-Coat RV & Marine is a ceramic clear coating with superior resistance to scratching (9H), chemical etching, fading due to UV, and provides outstanding release properties. Opti-Coat RV & Marine pre-polymer cross links and forms a continuous protective film on the painted gel coat surfaces it is applied to, similar to a single component isocyanate that forms a clear coat finish. Opti-Coat RV & Marine has better chemical resistance, scratch & mar resistance, and release properties than any paint coating in use. It provides permanent protection for all modern factory paints and gel coats and can also be used to protect metal and hard plastic surfaces. This is for professional installers and includes (1) 30cc syringe of Opti-Coat RV & Marine. This is not warrantied.Opti-Coat RV & Marine Care Guide
WASHING For best results, wash with Opti-Coat No Rinse on a monthly basis at a minimum to avoid excessive contamination build up on the surface. Avoid washing your Boat or RV in direct sunlight if possible. Heated panels will cause drying and possibly leave streaks and water spotting on the surface. If this is not an option, then wash and dry one panel at a time for best results. Wash the cleanest panels first. Leave the dirtiest panels for last to avoid cross contamination. Usually this involves starting from the top panels and followed by the lower ones. DRYING Always dry your RV or Boat completely and never allow it to air dry. Tap water contains minerals. When the water evaporates, these minerals are deposited on the surface creating water spots. As the minerals harden with heat, they can be extremely difficult to remove from the surface. SPOT REMOVAL OF SURFACE CONTAMINATION Never use abrasive products to polish the coating or to remove surface contamination. Never use excessive rubbing or force to remove spot contamination. Surface contamination such as tar and other contaminants should be removed as soon as possible to avoid temporary staining of the coating and/or hardening on the surface requiring professional removal. For assistance with contamination removal or maintenance standards and techniques, contact your Opti-Coat Marine & RV dealer for professional advice. -
NEW! The Ultimate™ Solution For All Metal Surfaces! Opti-Metal Coat™ is a rapid curing ceramic coating designed to bond to all metal surfaces, to prevent ongoing oxidation and damage during cleaning processes. Opti-Metal Coat™ creates a protective barrier with an extremely strong bond to metal surfaces and high resistance to acids and chemicals. The hydrophobic properties provide easy ongoing maintenance for all automotive, marine, aviation and industrial applications. -
- Opti-Coat Pro Motorcycle is designed specifically for the motorcycle industry and contains both Opti-Coat Pro and Opti-Guard Leather for complete protection of motorcycles.
- 5 cc Opti-Coat Pro
- 5 cc Opti-Metal Coating
- 5 cc Opti-Guard Leather
- 2 oz Opti-Coat Primer
- Microfiber Towel
- Foam Applicator
- Warranty Card
-
PRO3- Benefits include:
- Better than any coating in terms of depth, gloss, scratch resistance, and hydrophobic properties.
- 4x thicker than Pro/Pro+
- Pro 3 Base Coat is a Silicon Carbide resin.
- Pro3 Top Coat is a hybrid.
- Only available to Exclusive Authorized Installers.
- Opti-Coat Pro3 packs will include (1) 20cc of Opti-Coat Pro3 and (1) 20 cc of the Top Coat in every warranty box .
- What you need to know:
- Top Coat should be applied over Opti-Coat Pro3 within 30-45 minutes Pro3 application.
- Total Time: 2-3 hours, 4 layers. No time between layers. Back to back.
- Curing is very similar to Pro & Pro+ however Pro3 is easier to apply!
- You will be provided with a blue foam applicator and a microsuede applicator. Use whichever works best for you. You will find your own preference.
- Limited Lifetime
- Required yearly maintenance
- Cost: $350 minimum which includes a $50 admin fee.
- Includes decontamination wash, clay/MDR, polish off scratches
- If they do not have their yearly check in the warranty reverts to 7 years.
- Document on how to do a maintenance will be provided.
- Benefits include:
-
The New & Improved Opti-Guard Fabric creates a more stain resistant and water repellent coating to protect fabric seats, carpets, and other textile surfaces. When liquids come in contact with Opti-Guard Fabric, the surface repels the substance without penetrating or staining the material. The New & Improved Opti-Guard Fabric forms a strong bond with the fibers to prevent removal during cleaning. This is the Opti-Guard Fabric stand-alone product for professional application and does not include a warranty. -
Opti-Coat Blue Microsuede Applicator Pads are a thin, miniature suede applicator specifically designed for application of coatings such as Opti-Coat. The smaller design makes them more convenient to handle than bulky applicators. Opti-Coat Blue Microsuede Applicator Pads are useful for numerous other purposes such as application of regular sealants and Optimum Opti-Seal. Applicators measure 12cm x 6cm x 2cm -
Opti-Guard Leather creates a hydrophobic coating to protect coated leather and vinyl surfaces from premature aging, cracking and other damage such as color transfer and staining. Opti-Guard Leather is manufactured using a hybrid ceramic and acrylic resins that allows a strong, flexible coating for these softer surfaces with complete protection from UV damage. Opti-Guard Leather is resistant to chemicals providing multi-year protection which is unheard of for leather coatings. It contains special matting agents to maintain the original factory appearance of the surfaces it is applied to. Apply Opti-Guard Leather to leather seats, vinyl dashboards, leather and vinyl trim pieces for complete protection inside and out. Opti-Guard Leather should not be used on Tanned Leather surfaces. Available in 10 cc (enough for 1 car) and 30 cc (enough for 3 cars) syringes. -
Opti-Guard Leather creates a hydrophobic coating to protect coated leather and vinyl surfaces from premature aging, cracking and other damage such as color transfer and staining. Opti-Guard Leather is manufactured using a hubrid ceramic and acrylic resins that allows a strong, flexible coating for these softer surfaces with complete protection from UV damage. Opti-Guard Leather is resistant to chemicals providing multi-year protection which is unheard of for leather coatings. It contains special matting agents to maintain the original factory appearance of the surfaces it is applied to. Apply Opti-Guard Leather to leather seats, vinyl dashboards, leather and vinyl trim pieces for complete protection inside and out. Opti-Guard Leather should not be used on Tanned Leather surfaces. Opti-Guard Fabric is included for carpets and fabric. This is the Opti-Guard Leather Warranty Pack for professional application and includes the warranty. MRP: $599.00