-
Opti-Coat Blue Microsuede Applicator Pads are a thin, miniature suede applicator specifically designed for application of coatings such as Opti-Coat. The smaller design makes them more convenient to handle than bulky applicators. Opti-Coat Blue Microsuede Applicator Pads are useful for numerous other purposes such as application of regular sealants and Optimum Opti-Seal. Applicators measure 12cm x 6cm x 2cm -
PRO3- Benefits include:
- Better than any coating in terms of depth, gloss, scratch resistance, and hydrophobic properties.
- 4x thicker than Pro/Pro+
- Pro 3 Base Coat is a Silicon Carbide resin.
- Pro3 Top Coat is a hybrid.
- Only available to Exclusive Authorized Installers.
- Opti-Coat Pro3 packs will include (1) 20cc of Opti-Coat Pro3 and (1) 20 cc of the Top Coat in every warranty box .
- What you need to know:
- Top Coat should be applied over Opti-Coat Pro3 within 30-45 minutes Pro3 application.
- Total Time: 2-3 hours, 4 layers. No time between layers. Back to back.
- Curing is very similar to Pro & Pro+ however Pro3 is easier to apply!
- You will be provided with a blue foam applicator and a microsuede applicator. Use whichever works best for you. You will find your own preference.
- Limited Lifetime
- Required yearly maintenance
- Cost: $350 minimum which includes a $50 admin fee.
- Includes decontamination wash, clay/MDR, polish off scratches
- If they do not have their yearly check in the warranty reverts to 7 years.
- Document on how to do a maintenance will be provided.
- Benefits include:
-
- Opti-Coat Pro Motorcycle is designed specifically for the motorcycle industry and contains both Opti-Coat Pro and Opti-Guard Leather for complete protection of motorcycles.
- 5 cc Opti-Coat Pro
- 5 cc Opti-Metal Coating
- 5 cc Opti-Guard Leather
- 2 oz Opti-Coat Primer
- Microfiber Towel
- Foam Applicator
- Warranty Card
-
PRO PLUS- Pro Plus benefits include:
- Higher Gloss
- Additional scratch resistance
- Greater water and dirt repellent
- More protective properties and durability
- The formula is not affected by cleaning chemicals!
- Pro Plus requires twice as much product per car. Therefore, the Opti-Coat Pro Plus packs will include 15 cc of Opti-Coat Pro and 10 cc of the Pro Plus in every warranty box and the cost will be $250.00 per pack effective immediately.
- What you need to know:
- Pro Plus should be applied over Opti-Coat Pro within 30-45 minutes of Pro application. This will make the application much easier and will maximize bonding.
- Wait till 75-80% of the Pro Plus crosslinks and goes clear, then wipe off the excess. The crosslinking of the Pro Plus will be much faster, therefore you will need to wipe off excess fairly quickly.
- As your towel saturates, you will want to switch to a new towel.
- Pro Plus benefits include:
-
Opti-Coat Pro is a ceramic clear coating warrantied for up to 5 years1 with superior resistance to scratching (9H) which means less scratches over time, chemical etching which means prevents chemical damage to clearcoat , fading due to UV which means the paint system looks vibrant and new, and provides outstanding release properties which means less dirt sticks to the coated surfaces. The Opti-Coat Pro pre-polymer cross links, and forms a continuous protective film on the painted surface it is applied to, similar to a single component isocyanate that forms a clear coat finish with much better properties than the factory clearcoat as described above. Opti-Coat Pro has better chemical resistance than any other automotive paint coating in use which means no damage from the environmental chemicals, better scratch & mar resistance than any other automotive paint coating which means reduced scratching and marring, and better release properties than any other automotive paint coating in use which means less dirt build up between washes. It provides permanent protection for all modern factory paints and can also be used to protect metal and hard plastic surfaces. This is the warranty package for professional installers and includes 2 oz. Opti-Coat Primer. MRP $999.00 The application includes at a minimum, washing, decontamination, polishing with Primer Polish, installation of the coating on all painted surfaces and registration of the warranty. 1 See warranty terms and conditions here: http://opticoat.com/page/warranty-terms -
Opti-Coat RV & Marine is a ceramic clear coating with superior resistance to scratching (9H), chemical etching, fading due to UV, and provides outstanding release properties. Opti-Coat RV & Marine pre-polymer cross links and forms a continuous protective film on the painted gel coat surfaces it is applied to, similar to a single component isocyanate that forms a clear coat finish. Opti-Coat RV & Marine has better chemical resistance, scratch & mar resistance, and release properties than any paint coating in use. It provides permanent protection for all modern factory paints and gel coats and can also be used to protect metal and hard plastic surfaces. This is for professional installers and includes (1) 30cc syringe of Opti-Coat RV & Marine. This is not warrantied.Opti-Coat RV & Marine Care Guide
WASHING For best results, wash with Opti-Coat No Rinse on a monthly basis at a minimum to avoid excessive contamination build up on the surface. Avoid washing your Boat or RV in direct sunlight if possible. Heated panels will cause drying and possibly leave streaks and water spotting on the surface. If this is not an option, then wash and dry one panel at a time for best results. Wash the cleanest panels first. Leave the dirtiest panels for last to avoid cross contamination. Usually this involves starting from the top panels and followed by the lower ones. DRYING Always dry your RV or Boat completely and never allow it to air dry. Tap water contains minerals. When the water evaporates, these minerals are deposited on the surface creating water spots. As the minerals harden with heat, they can be extremely difficult to remove from the surface. SPOT REMOVAL OF SURFACE CONTAMINATION Never use abrasive products to polish the coating or to remove surface contamination. Never use excessive rubbing or force to remove spot contamination. Surface contamination such as tar and other contaminants should be removed as soon as possible to avoid temporary staining of the coating and/or hardening on the surface requiring professional removal. For assistance with contamination removal or maintenance standards and techniques, contact your Opti-Coat Marine & RV dealer for professional advice. -
Opti-Coat RV & Marine is a ceramic clear coating warrantied for up to 5 years with superior resistance to scratching (9H), chemical etching, fading due to UV, and provides outstanding release properties. Opti-Coat RV & Marine pre-polymer cross links and forms a continuous protective film on the painted gel coat surfaces it is applied to, similar to a single component isocyanate that forms a clear coat finish. Opti-Coat RV & Marine has better chemical resistance, scratch & mar resistance, and release properties than any paint coating in use. It provides permanent protection for all modern factory paints and gel coats and can also be used to protect metal and hard plastic surfaces. This is the warranty package for professional installers and includes (1) 30cc syringe of Opti-Coat RV & Marine and (1) 17 oz. Optimum Paint Prep. MRP: $100 per linear ft.Opti-Coat RV & Marine Care Guide
WASHING For best results, wash with Opti-Coat No Rinse on a monthly basis at a minimum to avoid excessive contamination build up on the surface. Avoid washing your Boat or RV in direct sunlight if possible. Heated panels will cause drying and possibly leave streaks and water spotting on the surface. If this is not an option, then wash and dry one panel at a time for best results. Wash the cleanest panels first. Leave the dirtiest panels for last to avoid cross contamination. Usually this involves starting from the top panels and followed by the lower ones. DRYING Always dry your RV or Boat completely and never allow it to air dry. Tap water contains minerals. When the water evaporates, these minerals are deposited on the surface creating water spots. As the minerals harden with heat, they can be extremely difficult to remove from the surface. SPOT REMOVAL OF SURFACE CONTAMINATION Never use abrasive products to polish the coating or to remove surface contamination. Never use excessive rubbing or force to remove spot contamination. Surface contamination such as tar and other contaminants should be removed as soon as possible to avoid temporary staining of the coating and/or hardening on the surface requiring professional removal. For assistance with contamination removal or maintenance standards and techniques, contact your Opti-Coat Marine & RV dealer for professional advice. MRP: $100.00 per linear foot -
NEW & IMPROVED Opti-Glass Pro Coating is designed to chemically bond to silica based surfaces to form a hydrophobic film that provides long term protection to glass and other silica based surfaces. Opti-Glass Pro promotes safety by increasing visibility during inclement weather driving. additionally, it will increase chip resistance, scratch and mar resistance and protect from water staining. For increased durability, clean your glass with Opti-Coat Opti-Glass Clean & Protect on a monthly basis. 60cc -
Opti-Guard Fabric creates a stain resistant coating to protect fabric seats, carpets and other textile surfaces. When liquids come in contact with Opti-Guard Fabric, the surface repels the substance without penetrating or staining the material. Opti-Guard Fabric forms a strong bond with the fibers to prevent removal during cleaning. This is the Opti-Guard Fabric Warranty Pack with Opti-Guard Leather for professional application and includes the warranty. Opti-Guard Leather should not be used on Tanned Leather surfaces. MRP: $599.00 -
Opti-Guard Leather creates a hydrophobic coating to protect coated leather and vinyl surfaces from premature aging, cracking and other damage such as color transfer and staining. Opti-Guard Leather is manufactured using a hubrid ceramic and acrylic resins that allows a strong, flexible coating for these softer surfaces with complete protection from UV damage. Opti-Guard Leather is resistant to chemicals providing multi-year protection which is unheard of for leather coatings. It contains special matting agents to maintain the original factory appearance of the surfaces it is applied to. Apply Opti-Guard Leather to leather seats, vinyl dashboards, leather and vinyl trim pieces for complete protection inside and out. Opti-Guard Leather should not be used on Tanned Leather surfaces. Opti-Guard Fabric is included for carpets and fabric. This is the Opti-Guard Leather Warranty Pack for professional application and includes the warranty. MRP: $599.00 -
Optimum Opti-Lens Coating is the most advanced polymer system that is specifically designed for the protection of headlight lenses. This hybrid resin is a combination of Opti-Coat ceramic resin and an acrylic resin for maximum bonding and protection of acrylic and polycarbonate lenses. Additionally Optimum Opti-Lens Coating contains high levels of UV absorbers to minimize discoloration and fading of automotive headlight lenses. Optimum Opti-Lens Coating is highly concentrated. Once applied, Optimum Opti-Lens Coating will form a permanent bond to the surface and can only be removed by polishing or paint removers. 30 cc Directions: 1. Clean headlights with 15% IPA solution to remove any oils, waxes, or sealants. 2. Remove all the oxidation by sanding and then polishing the headlights with Optimum Polish II or Optimum Hyper Polish. 3. Wipe down the entire lens with a clean damp microfiber towel to remove any polishing residue. 4. Prime the applicator pad by making an X pattern across the pad. Only a few drops will be needed per headlight lens. 5. Wipe Optimum Opti-Lens Coating on the headlight lens in a circular or back and forth direction. 6. Within 5 minutes, inspect the headlight with adequate lighting looking for any thick areas that have not flashed away to clear. 7. Use the foam applicator or an Optimum Multi-Surface Microfiber Towel to wipe down and remove any excess. (Previous product code was OLC2013-30) -
NEW! The Ultimate™ Solution For All Metal Surfaces! Opti-Metal Coat™ is a rapid curing ceramic coating designed to bond to all metal surfaces, to prevent ongoing oxidation and damage during cleaning processes. Opti-Metal Coat™ creates a protective barrier with an extremely strong bond to metal surfaces and high resistance to acids and chemicals. The hydrophobic properties provide easy ongoing maintenance for all automotive, marine, aviation and industrial applications.