• NEW FORMULA
    • One step washing and waxing formula
    • Super safe wash formula
    • Extremely concentrated formula
    • Carnauba wax formula means fantastic shine in less time
       
  •  
    • Most versatile product in the detailing industry. Will save money and time.
    • Faster, safer washing
    • Eco-friendly and saves water
    • Extremely concentrated formula that has a variety of uses and dilutions. See below for common dilution ratios.
    • Greater lubricity
    • More gloss and protection than before!
       
  • Optimum MDR™ Mineral Deposit Remover is the most advanced cleaner that dissolves and removes mineral deposits and other contaminants from exterior automotive surfaces. It is a non-abrasive chemical cleaner that will dissolve and remove water based contaminants without the need to polish or abrade the surface. Simply wipe Optimum MDR™ on painted or other automotive surfaces to dissolve and remove minerals. A combination of acids and cleaning agents will break down and dissolve these contaminants and make the surface clean and smooth again witout affecting or removing paint! Directions: Pour Optimum MDR™ on a clean microfiber towel or foam applicator. Wipe on the surface and work it in for 30 - 60 seconds. Wipe off the residue and check to see if the surface is clean and free of mineral deposits. Repeat the above steps as required to remove any remaining contaminants. Wash the surface to remove any remaining chemical residue.
  • Optimum Intensive Polish

    $29.99$129.99
    Optimum Intensive Polish is a fast cutting polish that leaves a great finish in one step in most cases. It works as a compound with a wool pad that removes 2,000 grit or lighter wet sanding marks, and a medium polish with a polishing pad that can finish in one step. Just like all Optimum polishes, Optimum Intensive Polish is extremely easy to use and has a long working time with no dusting or sling issues. Its spray application minimizes the chance of overloading or gumming up the pad, and it provides an even application. Optimum Intensive Polish easily wipes off with a damp microfiber towel, whether you use it in the sun or shade, to achieve outstanding results. Optimum Intensive Polish works quickly to remove (not hide) swirl marks, scratches, and other blemishes, while creating a perfect shine on all types of paint. By spraying the polish onto a buffing pad, you can effectively prime the entire pad with minimal amount of product. Therefore you are using the entire pad to polish the paint and achieve better results in less time than a conventional polish. Optimum Intensive Polish has excellent workability on painted surfaces and will not clog buffing pads. Aggressive enough for paint correction and swirl removal, yet the shine, clarity, and gloss of the paint left behind requires only final protection in most cases. Directions: To remove 2,000 grit or finer sanding marks spray Optimum Intensive Polish on the Optimum Wool Pad using Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. To remove lighter scratches and swirl marks, spray Optimum Intensive Polish on the orange waffle or black waffle foam pad using Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. 1. Shake Well. 2. Use 2-3 sprays initially to prime the pad. After the initial priming, use only two sprays per panel. There is no need to apply additional product since Optimum Intensive Polish has a long working time and will continue on working to remove the scratches. 3. Use light to medium pressure on the buffer until desired results are achieved. 4. Wipe off residue with a dampened microfiber towel. 5. On softer clears, follow up with Optimum Hyper Polish to refine the paint surface before applying Optimum Car Wax. Optimum Intensive Polish is bodyshop safe and meets all VOC regulations.
  • Optimum Hyper Polish

    $29.99$119.99
    Optimum Hyper Polish is the first and only sprayable polish in the marketplace. By spraying the polish onto a buffing pad, you can effectively prime the entire pad with a minimal amount of product. Therefore you are using the entire pad to polish the paint and achieve better results in less time than a conventional polish. Just like all Optimum polishes, Optimum Hyper Polish is extremely easy to use and has a long working time with no dusting or sling issues. Its spray application minimizes the chance of overloading or gumming up the pad, and it provides an even application. Optimum Hyper Polish easily wipes off with a damp Optimum No Rinse microfiber towel, whether you use it in the sun or shade, to achieve outstanding results. Optimum Hyper Polish is VOC compliant and body shop safe. It can be used with any type of buffing pad or buffing machine. It acts as a light compound with a cutting pad and as a finishing polish with a finishing pad. It works quickly to remove (not hide) swirl marks, scratches, and other blemishes, while creating a perfect shine on all types of paint. Optimum Hyper Polish has excellent workability on painted surfaces and will not clog buffing pads. Aggressive enough for paint correction and swirl removal, yet the shine, clarity, and gloss of the paint left behind requires only final protection.  
  • BUY ONE, GET ONE FREE.  PUT ONE IN YOUR CART AND WE WILL SEND AN EXTRA IN YOUR ORDER.   You do not need to put two in your cart.   Optimum Hyper™ Compound is the first and only spray compound in the marketplace that can remove 1,000 grit and deep scratches in seconds while creating a great finish. Optimum Hyper™ Compound was designed for professional detailers and auto body shops to cut through wet sanding marks and deep scratches in one or two passes. Optimum Hyper™ Compound offers all the advantages of Optimum line of polishes with long working time and low to no dusting. The spray on application provides ease of use and reduces the amount of product needed to a fraction of the traditional products. 2-3 sprays is enough to cover the entire pad making the whole pad do the cutting and eliminating dry buffing. The minor swirls left after using Optimum Hyper™ Compound can easily be removed with the Optimum™ Hyper Polish. Optimum Hyper™ Compound has a long working time to allow complete paint correction with one application. The residue is easily wiped off with a dry or damp microfiber towel. Optimum Hyper™ Compound contains no silicone oils or wax, so it is completely body shop safe. Optimum Hyper™ Compound can be used at any speed on your polisher with a wool or foam pad. When using a wool buffing pad, the compound will remove 1000 grit sand scratches and lighter using an Optimum Hyper™Wool Foam Pad with Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. Faster buffing speed is not needed with this product. When using a medium or heavy cut foam pad, the compound will remove 2,000 sand scratches and lighter with Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. The compound works more or less aggressively depending on the pad you choose. Directions: To remove 1,000 grit or finer sanding marks spray Optimum Hyper™ Compound on the Optimum Hyper™Wool Foam Pad using Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. To remove lighter scratches and swirl marks, spray Optimum Hyper™ Compound on an orange waffle or black waffle foam pad using Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. 1. Shake Well. 2. Use 2-3 sprays initially to prime the pad. After the initial priming, use two sprays per panel. There is no need to apply additional product since Optimum Hyper™ Compound has a long working time and will continue on working to remove the scratches. 3. Use light to medium pressure on the buffer until desired results are achieved. 4. Wipe off residue with a dampened microfiber towel. Follow up with Optimum Hyper Polish to refine the paint surface before applying Optimum Car Wax.
  • Glaze, Polish, & Seal with Optimum GPS™ All-in-One Optimum GPS™ is the most remarkable, all-in-one product ever produced in a spray form! This zero dusting, buttery-smooth formula is the ultimate, one-step product. It creates gloss and long term protection that is second to none. Optimum GPS™ contains micro abrasives that eliminate (not hide) minor surface imperfections. It provides swirl mark removal, the final polish and a durable wax/sealant…all in one step! The spray application makes priming the pad very easy and reduces product usage. GPS™ creates a perfect shine on all types of paint, fiberglass, gel coat and smooth molded plastic. A single application provides "optimum" protection for your vehicle that lasts for months! Directions for use: Hand Application: Spray on a small area and wipe in with a dampened foam or cloth applicator. After slight hazing occurs, wipe-off with a microfiber or terry towel for a perfect shine. Machine Application: Apply with orbital or rotary polisher and appropriate pad for the job. Spray once to prime the pad and one spray per panel to create a lubricating barrier between the buffing pad and the surface. Work across the area until product disappears. (We suggest 1000-1400 rpms for rotary polishers). Wipe with a lightly misted cotton towel for a steak-free, perfect finish. For deeper surface imperfections, use Optimum Polish or Optimum Compound prior to GPS.
  • Optimum Car Wash

    $4.99$35.99
    • Highly concentrated formula only requiring .5 oz per gallon (15ml to 4-5 liters) to produce results
    • pH neutral soap will not strip protection
    • Highly foamable formula is perfect for foam cannons
    • Bio-degradable ingredients making it safe to use anywhere
  • Optimum Ferrex

    $21.99$129.99
    Optimum FerreX™ is designed to dissolve and remove ferrous oxides from wheels and painted surfaces quickly by bonding and dissolving them away with minimal effort. Furthermore, Optimum FerreX™ will dissolve and remove other surface contaminants such as tar and wax at the same time. Directions for wheels: Avoid using on hot surfaces. Wash wheels to remove excess contaminants. Spray Optimum FerreX™ directly on wheels and allow 1 - 2 minutes to fully dissolve ferrous oxides. Agitate with a soft bristle brush as needed. Rinse off with plenty of water. Directions for painted surfaces: Wash with Optimum No Rinse™ Wash & Shine or Optimum Car Wash before applying Optimum FerreX™. Use on a cool surface and out of direct sunlight. Spray Optimum FerreX™ directly on painted surface and allow 1 - 2 minutes to fully dissolve ferrous oxide. Agitate with a microfiber towel or soft sponge if necessary. Rinse off with plenty of water.
    • A powerful but safe formula that makes dirt just disappear!
    • Built-in polymers wrap around the carpet fibers to protect them after cleaning
    • Concentrated formula dilutable to 3:1 for most interiors
  • Optimum Car Wax

    $5.99$49.99
    Optimum Car Wax is the only spray car wax that provides the durability of a paste wax and long-lasting UV protection. A combination of high-grade Carnauba wax, sealant polymers and UV inhibitors forms a protective layer on the painted surface to protect the paint from sun damage and environmental elements for up to 5 months. Key Benefits: Easy to Use Takes Less than 15 minutes to wax the whole car. No buffing required. No residues to remove. Durable 1 application lasts up to 5 months UV Protection Helps reduce fading Non-Abrasive Will not create swirl marks like traditional car wax/polishes Environmentally Friendly Contains no harsh chemicals or VOC's Performance Guaranteed If not completely satisfied with performance, purchase price will be refunded. Optimum Car Wax is currently used by many car washes and detail shops. The superior performance, ease of application, and no messy residue are just some of the reasons these professionals prefer Optimum Car Wax over all other products in the marketplace.
Go to Top