• The New Optimum RV & Marine Interior Protectant is a unique product that cleans, restores and protects leather and vinyl surfaces as well as moldings. Optimum RV & Marine Interior Protectant contains a balance of cleaners penetrating oils, and UV inhibitors that restore the original color of these surfaces, protect and hide any scratches and protect against Sun damage. Directions: 1. Remove any loose dirt from the surface 2. Spray Optimum RV & Marine Interior Protectant directly on surface and wipe off with an Optimum Microfiber towel. 3. You can also spray Optimum RV & Marine Protectant on a microfiber towel and then apply to the surface.
  • The New RV & Marine Polish

    $29.99$129.99
    The New RV & Marine Polish is a unique and powerful polish that will make quick work of removing oxidation and scratches on gelcoat surfaces such as RVs and Boats and leaves a perfect Finish behind. The rapid leveling will leave the Gelcoat clean and ready for adding protection with Optimum Opti-Seal. Optimum RV & Marine Polish can be used as a medium to light compound as well as a finishing polish all in one. When used with Optimum DA and Optimum Hyper Wool pad, it will perform as a medium compound. Follow with the Optimum Orange or Black Pad and get a perfect finish with great gloss! Directions: 1. Shake well before using. 2. Apply 1 to 2 sprays on the pad for each 2 square foot section. 3. Use Optimum DA with medium to heavy pressure for fast cutting, lightening the pressure on the final few passes to create a deeper gloss with no marring. 4. Use a dampened microfiber towel to remove residue.
  • The New RV & Marine Wash

    $14.99$39.99
    The New RV & Marine Wash is a super concentrated super strong detergent to clean and remove light gelcoat oxidation and contamination from RVs, boats and other watercrafts. It also works great for cars and other vehicles whenever you want to remove waxes and sealants without affecting Opti-Coat or other ceramic coatings.   Directions:
    1. Rinse Boat or RV to remove loose dirt.
    2. Put 4 gallons of water in a bucket and add 0.5 oz. of Optimum RV & Marine Wash concentrate per gallon and mix.
    3. Wash Boat or RV using the Optimum Big Red Sponge or Optimum Microfiber Towel.
    4. Rinse all the soap off from all the surfaces then dry immediately with Optimum Drying Towel to avoid water spots. Rinse hands after use.
     
  • Optimum Assure is a new revolutionary product that cleans and disinfects surfaces from most common bacteria including Covid-19 virus as well being a fungicide and controlling mildew. Assure disinfects and deodorizes hard, non-porous surfaces such as: cars, trucks, campers, RVs, boats and other watercrafts including ships and barges, public transportation, trains, taxis, airplanes, and helicopters. Assure kills 99.9% of household and institutional bacteria and viruses including Covid-19 virus on hard non-porous surfaces. Fungicidal Performance: Assure kills the following fungi in 10 minutes on hard, non-porous surfaces with up to 5% soil: Candida albicans and Tricophyton interdigitale. Mildewstatic Performance: Assure controls the following mold for 7 days on hard surfaces with up to 5% soil: Aspergillus niger. Viricidal Performance: Assure kills the following viruses in 10 minutes on hard, non-porous surfaces with up to 5% soil: Avian influenza A virus, Hanatavirus, Hepatitis A virus, Hepatitis B virus, Hepatitis C virus, Herpes Simplex type 1, Herpes Simplex type 2, Human Cornoa virus, Influenza A virus, Respiratory Syncitial virus, SARS Covid2 (Covid19 Virus), and Vaccinia virus. Directions: To Kill Fungi: Pre-clean visibly soiled surfaces. Apply Assure undiluted to hard, non-porous surfaces and let air dry. To Control Mold/Mildew: Apply Assure undiluted to hard, non-porous surfaces which will effectively inhibit the growth of mold and mildew and their odors. Repeat treatment once every seven days if new growth appears. For Use as a General Disinfectant: 1. Pre-clean visibly soiled surfaces. 2. Apply Assure undiluted to the surfaces with a sponge, brush, cloth, or trigger spray. For spray application, spray 6-8 inches form the surface. Do not breathe spray. 3. Treated surfaces must remain visibly wet for 1 minute to kill SARS Covid2and 10 minutes to kill all organisms listed above. Rinse with potable water after use on surfaces that come in contact with food. 4. Wipe dry with a clean cloth or allow to air dry. 5. Change solution when visibly dirty.
  • The Mini DA 3 inch Backing Plate is designed to work specifically with 12mm DA Polishers. Additionally, they are perforated to allow air to circulate through the Optimum Foam and Wool Pads and through the polisher. This air movement will keep paint, pad, and polisher cooler which will improve the performance and the results. The lower temperatures will make your polisher and pads last longer and prevent paint from being damaged due to excessive heat and shear.
  • The new more powerful, smoother, and quieter Optimum DA21EM3 Dual Action Polisher represents one of the latest advancements in machine polishing technology. With 1,100 Watt of power, it cuts faster, runs smoother and much quieter than any other orbital polisher with an orbit (throw) of 21mm, this dual action polisher has evolved to become a leader in efficient cutting power while still maintaining the safe operation expected from a DA polisher. The new Optimum DA21EM3 is powered by a new, highly powerful and efficient motor that produces the torque required to quickly remove heavy paint defects while maintaining the lowest noise levels and smoothest action you will find on a dual action polisher! The new Optimum DA21EM3 is manufactured using only the highest quality parts. The backing plate features ventilated cooling channels to help reduce heat transfer and the machine also includes an easy access panel for services and replacing carbon brushes.
  • Opti-Coat RV & Marine is a ceramic clear coating with superior resistance to scratching (9H), chemical etching, fading due to UV, and provides outstanding release properties. Opti-Coat RV & Marine pre-polymer cross links and forms a continuous protective film on the painted gel coat surfaces it is applied to, similar to a single component isocyanate that forms a clear coat finish. Opti-Coat RV & Marine has better chemical resistance, scratch & mar resistance, and release properties than any paint coating in use. It provides permanent protection for all modern factory paints and gel coats and can also be used to protect metal and hard plastic surfaces. This is for professional installers and includes (1) 30cc syringe of Opti-Coat RV & Marine. This is not warrantied.    

    Opti-Coat RV & Marine Care Guide

    WASHING For best results, wash with Opti-Coat No Rinse on a monthly basis at a minimum to avoid excessive contamination build up on the surface. Avoid washing your Boat or RV in direct sunlight if possible. Heated panels will cause drying and possibly leave streaks and water spotting on the surface. If this is not an option, then wash and dry one panel at a time for best results. Wash the cleanest panels first. Leave the dirtiest panels for last to avoid cross contamination. Usually this involves starting from the top panels and followed by the lower ones. DRYING Always dry your RV or Boat completely and never allow it to air dry. Tap water contains minerals. When the water evaporates, these minerals are deposited on the surface creating water spots. As the minerals harden with heat, they can be extremely difficult to remove from the surface.  SPOT REMOVAL OF SURFACE CONTAMINATION Never use abrasive products to polish the coating or to remove surface contamination. Never use excessive rubbing or force to remove spot contamination. Surface contamination such as tar and other contaminants should be removed as soon as possible to avoid temporary staining of the coating and/or hardening on the surface requiring professional removal. For assistance with contamination removal or maintenance standards and techniques, contact your Opti-Coat Marine & RV dealer for professional advice.
  • Opti-Coat RV & Marine is a ceramic clear coating warrantied for up to 5 years with superior resistance to scratching (9H), chemical etching, fading due to UV, and provides outstanding release properties. Opti-Coat RV & Marine pre-polymer cross links and forms a continuous protective film on the painted gel coat surfaces it is applied to, similar to a single component isocyanate that forms a clear coat finish. Opti-Coat RV & Marine has better chemical resistance, scratch & mar resistance, and release properties than any paint coating in use. It provides permanent protection for all modern factory paints and gel coats and can also be used to protect metal and hard plastic surfaces. This is the warranty package for professional installers and includes (1) 30cc syringe of Opti-Coat RV & Marine and (1) 17 oz. Optimum Paint Prep. MRP: $100 per linear ft.  

    Opti-Coat RV & Marine Care Guide

    WASHING For best results, wash with Opti-Coat No Rinse on a monthly basis at a minimum to avoid excessive contamination build up on the surface. Avoid washing your Boat or RV in direct sunlight if possible. Heated panels will cause drying and possibly leave streaks and water spotting on the surface. If this is not an option, then wash and dry one panel at a time for best results. Wash the cleanest panels first. Leave the dirtiest panels for last to avoid cross contamination. Usually this involves starting from the top panels and followed by the lower ones. DRYING Always dry your RV or Boat completely and never allow it to air dry. Tap water contains minerals. When the water evaporates, these minerals are deposited on the surface creating water spots. As the minerals harden with heat, they can be extremely difficult to remove from the surface.  SPOT REMOVAL OF SURFACE CONTAMINATION Never use abrasive products to polish the coating or to remove surface contamination. Never use excessive rubbing or force to remove spot contamination. Surface contamination such as tar and other contaminants should be removed as soon as possible to avoid temporary staining of the coating and/or hardening on the surface requiring professional removal. For assistance with contamination removal or maintenance standards and techniques, contact your Opti-Coat Marine & RV dealer for professional advice.   MRP: $100.00 per linear foot
  • The NEW Optimum Blue Microfiber Applicator Pad is 3 x 5 x 1. The smaller design makes them more convenient to handle than bulky applicators. The NEW Optimum Blue Microfiber Applicator Pad is useful for numerous purposes.
  • NEW 12 x 12 Yellow Microfiber Towel   Every Optimum microfiber towel is manufactured using the highest quality material to produce the highest quality results. Made from commercial quality microfiber to withstand years of repeated washing and drying.
  • Introducing our new Opti-Coat Pro Polo Shirt with the Opti-Coat Pro logo on front, back and both sleeves.  These polo shirts are higher quality with anti-snag, dri-fit, and sublimation process.  
  • PRO3
    • Benefits include:
      • Better than any coating in terms of depth, gloss, scratch resistance, and hydrophobic properties.
      • 4x thicker than Pro/Pro+
      • Pro 3 Base Coat is a Silicon Carbide resin.
      • Pro3 Top Coat is a hybrid.
      • Only available to Exclusive Authorized Installers.
     
    • Opti-Coat Pro3 packs will include (1) 20cc of Opti-Coat Pro3 and (1) 20 cc of the Top Coat in every warranty box .
     
    • What you need to know:
      • Top Coat should be applied over Opti-Coat Pro3 within 30-45 minutes Pro3 application.
      • Total Time: 2-3 hours, 4 layers.  No time between layers. Back to back.
      • Curing is very similar to Pro & Pro+ however Pro3 is easier to apply!
      • You will be provided with a blue foam applicator and a microsuede applicator. Use whichever works best for you. You will find your own preference.
      MRP $3,000.00 The application includes at a minimum, washing, decontamination, polishing with Primer Polish, installation of the coating on all painted surfaces and registration of the warranty.   Warranty
    • Limited Lifetime
    • Required yearly maintenance
    • Cost: $350 minimum which includes a $50 admin fee.
    • Includes decontamination wash, clay/MDR, polish off scratches
      • If they do not have their yearly check in the warranty reverts to 7 years.
      • Document on how to do a maintenance will be provided.
      For questions or comments please contact your representative or email us at info@opticoat.com  
Go to Top