-
Optimum Opti-Glass Clean & Protect Concentrate is a hyper-concentrated glass cleaner that contains a combination of mild cleaners and an advanced polymer that bonds to glass and other silica based surfaces to add water repellency by lowering the surface tension and protect glass by increasing the coefficient of slip. Optimum Opti-Glass Clean & Protect can be used as a stand-alone glass sealant or as a booster to Optimum Opti-Glass Coating. Optimum Opti-Glass Clean & Protect is designed to chemically bond to silica based surfaces such as automotive glass and provide long term water repellency and improve resistance against scratching and rock chips for up to one year. Use the Optimum Opti-Glass Clean & Protect for subsequent cleaning to increase the longevity of Optimum Opti-Glass Coating indefinitely. Optimum Opti-Glass Clean & Protect is highly concentrated and the 2 oz. bottle should be diluted with water to make one gallon of ready to use product. Once diluted, the regular use will ensure improved visibility and increased chip resistance to make driving safer and more enjoyable. Additionally Optimum Opti-Glass Clean & Protect will prevent ice or snow from bonding to the glass surfaces. Directions: 1.Dilute Optimum Opti-Glass Clean & Protect Concentrate with distilled water to make one gallon of ready to use product. 2. Spray liberally on glass surfaces and wipe down with Optimum Glass Towel till glass surface is completely clean. Not for use on interior glass. (Net: 60 CC -
Optimum Opti-Bond Tire Gel is a thick, water-based formula for use on tires, wheel wells, interior and exterior trim, vinyl, and dashboards. It will produce a durable, high gloss shine that is not greasy or attracts dust. Opti-Bond contains no petroleum distillates which are known to crack rubber and vinyl. It contains advanced UV and ozone protectants to shield surfaces from sun damage and environmental pollution. Rubber and vinyl surfaces will remain supple, flexible and retain their color with regular use of Opti-Bond. Application: Opti-Bond Tire Gel can be applied a couple of ways. You can wipe it on with a foam applicator, just like a traditional tire dressing. The other option is to dilute the gel 1:1 with water and apply it with a spray gun and air compressor. The gun will deliver a fine mist over the tires and wheel wells. This is a great option for professional detailers and garages. Wipe away excess tyre gel with a foam pad or a lint-free towel. Available in 8, 32 or 128 fl. oz. sizes. -
Optimum Opti-Clean is the most advanced waterless wash in the marketplace. It is designed to wipe away dirt and grime from automotive paint and other surfaces safely and effectively in a spray and wipe application. Optimum Opti-Clean contains the same proven polymer system that is used in the Optimum No Rinse Wash & Shine as well as additional polymers that add greater lubricity and protection to the paint. Simply spray Optimum Opti-Clean on any surface and wipe off with a plush microfiber towel till the area is clean and dry. Optimum Opti-Clean is available in ready to use 18 oz. size or in 4x concentrate in 32 oz. and gallon sizes. Simply spray Optimum Opti-Clean liberally on the painted surfaces and wipe with a clean plush microfiber towel. The substantive polymers encapsulate the dirt and grime to protect the paint from marring while lubricating and bonding to the painted and other automotive surfaces to provide greater protection while leaving a slick glossy finish behind. -
Optimum Opti-Glass Coating is designed to chemically bond to silica based surfaces such as automotive glass and provide long term water repellency and improve resistance against scratching and rock chips for up to one year. Use the Optimum Glass Clean & Protect for subsequent cleaning to increase the longevity of Optimum Opti-Glass Coating indefinitely. Optimum Opti-Glass Coating is highly concentrated and one bottle is enough to cover 20-30 windshields. The improved visibility and the increased chip resistance that Optimum Opti-Glass Coating provides will make driving safer and more enjoyable. Additionally Optimum Opti-Glass Coating will prevent ice or snow from bonding to the glass surfaces. For best results before applying Optimum Opti-Glass Coating make sure the surface of glass is clean and free of any contaminants. Directions: Apply when the temperature is between 60°-90° F (15°-30°C). Do not apply in direct sunlight. 1. Polish glass as needed with Optimum Polish II or Opti-Eraser to remove any bonded contaminants. 2. Wipe down the surface with 15% Isopropanol (Rubbing Alcohol) solution to remove any oils or sealers. 3. Apply an even amount of Optimum Opti-Glass Coating to an applicator pad. 4. Wipe Optimum Opti-Glass Coating onto one half of the windshield at a time in a circular manner. 5. Allow Optimum Opti-Glass Coating to dry for 2 minutes and then wipe off the excess. If you do not remove the excess coating, it will harden and will require polishing to remove it. (Net: 60 CC) -
Optimum Opti-Lens Coating is the most advanced polymer system that is specifically designed for the protection of headlight lenses. This hybrid resin is a combination of Opti-Coat 2.0 ceramic resin and an acrylic resin for maximum bonding and protection of acrylic and polycarbonate lenses. Additionally Optimum Opti-Lens Coating contains high levels of UV absorbers to minimize discoloration and fading of automotive headlight lenses. Optimum Opti-Lens Coating is highly concentrated and one tube is enough to cover 5-6 sets of headlights. Once applied, Optimum Opti-Lens Coating will form a permanent bond to the surface and can only be removed by polishing or paint removers. Directions: 1. Clean headlights with 15% IPA solution to remove any oils, waxes, or sealants. 2. Remove all the oxidation by sanding and then polishing the headlights with Optimum Polish II or Optimum Hyper Polish. 3. Wipe down the entire lens with a clean damp microfiber towel to remove any polishing residue. 4. Prime the applicator pad by making an X pattern across the pad. Only a few drops will be needed per headlight lens. 5. Wipe Optimum Opti-Lens Coating on the headlight lens in a circular or back and forth direction. 6. Within 5 minutes, inspect the headlight with adequate lighting looking for any thick areas that have not flashed away to clear. 7. Use the foam applicator or an Optimum Multi-Surface Microfiber Towel to wipe down and remove any excess. -
Optimum Instant Detailer & Gloss Enhancer adds the most gloss and slickness to the paint finish. This water-based, environmentally friendly formula utilizes flouropolymers, which repel dust, dirt, and oil. Regular applications between washes will keep your vehicle looking cleaner and, of course, much slicker! You can use Optimum Instant Detailer & Gloss in several ways. Suggested Usage: Use it in conjunction with Optimum No Rinse Wash & Shine by spraying it on the panels as you dry the vehicle. This will create a super slick, incredibly glossy finish. Optimum Instant Detailer & Gloss Enhancer is also an excellent companion product to Optimum Opti-Seal. Whereas Opti-Seal’s main objective is protection, Optimum Instant Detailer pours on the gloss and slickness. The combination can’t be beat! Wait about 30 minutes after applying Opti-Seal to use Optimum Instant Detailer. After washing the car with Optimum Car Wash, spray your vehicle with Instant Detailer as you towel dry each panel. Optimum Instant Detailer & Gloss Enhancer can be used on wet or dry surfaces. Use Optimum Instant Detailer & Gloss Enhancer to maintain the gloss and boost the protection of Optimum Car Wax. In fact, Instant Detailer can be used on paint, metal, glass, and plastics. Available in 17 fl. oz. spray bottle, 32 fl. oz. concentrate (makes 1 gal.) and 128 fl. oz. concentrate (makes 4 gal.). -
Optimum Intensive Polish is a fast cutting polish that leaves a great finish in one step in most cases. It works as a compound with a wool pad that removes 2,000 grit or lighter wet sanding marks, and a medium polish with a polishing pad that can finish in one step. Just like all Optimum polishes, Optimum Intensive Polish is extremely easy to use and has a long working time with no dusting or sling issues. Its spray application minimizes the chance of overloading or gumming up the pad, and it provides an even application. Optimum Intensive Polish easily wipes off with a damp microfiber towel, whether you use it in the sun or shade, to achieve outstanding results. Optimum Intensive Polish works quickly to remove (not hide) swirl marks, scratches, and other blemishes, while creating a perfect shine on all types of paint. By spraying the polish onto a buffing pad, you can effectively prime the entire pad with minimal amount of product. Therefore you are using the entire pad to polish the paint and achieve better results in less time than a conventional polish. Optimum Intensive Polish has excellent workability on painted surfaces and will not clog buffing pads. Aggressive enough for paint correction and swirl removal, yet the shine, clarity, and gloss of the paint left behind requires only final protection in most cases. Directions: To remove 2,000 grit or finer sanding marks spray Optimum Intensive Polish on the Optimum Wool Pad using Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. To remove lighter scratches and swirl marks, spray Optimum Intensive Polish on the orange waffle or black waffle foam pad using Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. 1. Shake Well. 2. Use 2-3 sprays initially to prime the pad. After the initial priming, use only two sprays per panel. There is no need to apply additional product since Optimum Intensive Polish has a long working time and will continue on working to remove the scratches. 3. Use light to medium pressure on the buffer until desired results are achieved. 4. Wipe off residue with a dampened microfiber towel. 5. On softer clears, follow up with Optimum Hyper Polish to refine the paint surface before applying Optimum Car Wax. Optimum Intensive Polish is bodyshop safe and meets all VOC regulations. -
Optimum MDR™ Mineral Deposit Remover is the most advanced cleaner that dissolves and removes mineral deposits and other contaminants from exterior automotive surfaces. It is a non-abrasive chemical cleaner that will dissolve and remove water based contaminants without the need to polish or abrade the surface. Simply wipe Optimum MDR™ on painted or other automotive surfaces to dissolve and remove minerals. A combination of acids and cleaning agents will break down and dissolve these contaminants and make the surface clean and smooth again witout affecting or removing paint! Directions: Pour Optimum MDR™ on a clean microfiber towel or foam applicator. Wipe on the surface and work it in for 30 - 60 seconds. Wipe off the residue and check to see if the surface is clean and free of mineral deposits. Repeat the above steps as required to remove any remaining contaminants. Wash the surface to remove any remaining chemical residue. -
Optimum Metal Polish is the most effective and easy to use metal polish you will ever use! It can be used to remove oxidation, scratches, and swirl marks from all metal surfaces leaving a mirror shine. Optimum Metal Polish also leaves a protective coating to protect metal surfaces from oxidation. Optimum Metal Polish can be used by hand or with buffing machines on any metal surface. The sub-micron polishing agents and chemical cleaners work quickly to remove oxidation, scratches, and swirl marks quickly to create a flawless mirror shine. -
- Most versatile product in the detailing industry. Will save money and time.
- Faster, safer washing
- Eco-friendly and saves water
- Extremely concentrated formula that has a variety of uses and dilutions. See below for common dilution ratios.
- Greater lubricity
- More gloss and protection than before!
-
The New & Improved Optimum Gelcoat Restorer is engineered to return Gelcoat to its original factory finish without the need for polishing. The new formula is easier to apply and levels itself better for faster application times and a more even application. Optimum Gelcoat Restorer ("GCR") rebuilds the Gelcoat keeping the original thickness and restoring the gloss as before while adding additional UV protection to protect from oxidation. Directions: 1. Remove loose oxidation using pure Optimum Power Clean and a brush or mild scuff pad. 2. Rinse the surface thoroughly and dry. 3. Wearing gloves and eye protection, apply GCR to the surface in overlapping circular motions. If the Gelcoat was heavily oxidized, the GCR will soak in. Do not over apply, first coats should be very thin. Use a pearl weave, low nap towel for application. 4. Once dry to the touch (20-30 minutes), apply a second coat. Apply directly onto towel, not on panel. A sprayer can be attached to GCR bottle or product transferred for application. When the applicator begins to drag, add more product. 5. Depending on the level of oxidation, up to 5 coats may be required. Last pass, apply in straight lines. 6. To maintain the restored surface, wash with Optimum No Rinse (ONR) and apply Optimum Car Wax regularly. 7. One bottle of GCR is enough for 4 coats on a 40’ Boat or RV. Gelcoat Hints: • Thin coats and multiple coats (up to 5) • Only use on old/fading gelcoat • Can be applied in bright sunlight. • Sticky/spotty if too much applied • Use DAMP pearl weave towels, low nap, for smoother application. • 2-3 year durability (wax every 6 months) – Absorbs into the gel coat and restores from the inside out. • It’s acrylic based. • To remove streaking, polish with Hyper Polish and orange foam pad (or if necessary, move up to Intensive Polish). There are four major points for best application for GCR: 1. The condition of the Gelcoat – Will GCR work on it or not? Gelcoat Restorer is made for heavily oxidized paint. New Gelcoat isn’t porous as old, oxidized Gelcoat so it won’t accept the product, whether it is clear or colored Gelcoat. 2. Removing this oxidized Gelcoat is essential for the pores to accept the coating, exactly like prepping paint for coating, with concentrated Power Clean and white scuff pad. 3. The amount of product also essential, multiple moderate layers are better than one thick coat, both will streak. After removing the oxidized layer, the Gelcoat will look clean but dull. After 1-3 layers there may not be much gloss. Layers 4-5, the gloss will improve. 4. What you apply with is as important as the amount, a DAMP pearl weave towel or low nap MF applicator is the best way to apply GCR. -
Glaze, Polish, & Seal with Optimum GPS™ All-in-One Optimum GPS™ is the most remarkable, all-in-one product ever produced in a spray form! This zero dusting, buttery-smooth formula is the ultimate, one-step product. It creates gloss and long term protection that is second to none. Optimum GPS™ contains micro abrasives that eliminate (not hide) minor surface imperfections. It provides swirl mark removal, the final polish and a durable wax/sealant…all in one step! The spray application makes priming the pad very easy and reduces product usage. GPS™ creates a perfect shine on all types of paint, fiberglass, gel coat and smooth molded plastic. A single application provides "optimum" protection for your vehicle that lasts for months! Directions for use: Hand Application: Spray on a small area and wipe in with a dampened foam or cloth applicator. After slight hazing occurs, wipe-off with a microfiber or terry towel for a perfect shine. Machine Application: Apply with orbital or rotary polisher and appropriate pad for the job. Spray once to prime the pad and one spray per panel to create a lubricating barrier between the buffing pad and the surface. Work across the area until product disappears. (We suggest 1000-1400 rpms for rotary polishers). Wipe with a lightly misted cotton towel for a steak-free, perfect finish. For deeper surface imperfections, use Optimum Polish or Optimum Compound prior to GPS.