• PRO PLUS
    • Pro Plus benefits include:
      • Higher Gloss
      • Additional scratch resistance
      • Greater water and dirt repellent
      • More protective properties and durability
      • The formula is not affected by cleaning chemicals!
    • Pro Plus requires twice as much product per car. Therefore, the Opti-Coat Pro Plus packs will include 15 cc of Opti-Coat Pro and 10 cc of the Pro Plus in every warranty box and the cost will be $250.00 per pack effective immediately.
     
    • What you need to know:
      • Pro Plus should be applied over Opti-Coat Pro within 30-45 minutes of Pro application. This will make the application much easier and will maximize bonding.
      • Wait till 75-80% of the Pro Plus crosslinks and goes clear, then wipe off the excess. The crosslinking of the Pro Plus will be much faster, therefore you will need to wipe off excess fairly quickly.
      • As your towel saturates, you will want to switch to a new towel.
    The application includes at a minimum, washing, decontamination, polishing with Primer Polish, installation of the coating on all painted surfaces and registration of the warranty. For questions or comments please contact your representative or email us at info@opticoat.com MRP: $1499.00
  • Optimum Blue Foam Applicator

    $2.99
    The Optimum Blue Foam Applicator is designed for the application of Opti-Seal or any Optimum coatings and is perfect for applying any other wax or sealant. The strap on one side fits snug on your fingers and helps make the process much easier. Always keep a few on hand for any wax or sealant application. After the application is complete, you can wash the foam applicator with a mild detergent and reuse it again after it is fully dry.
  • Opti-Coat Pro is a ceramic clear coating warrantied for up to 5 yearswith superior resistance to scratching (9H) which means less scratches over time, chemical etching which means prevents chemical damage to clearcoat , fading due to UV which means the paint system looks vibrant and new, and provides outstanding release properties which means less dirt sticks to the coated surfaces. The Opti-Coat Pro pre-polymer cross links, and forms a continuous protective film on the painted surface it is applied to, similar to a single component isocyanate that forms a clear coat finish with much better properties than the factory clearcoat as described above. Opti-Coat Pro has better chemical resistance than any other automotive paint coating in use which means no damage from the environmental chemicals, better scratch & mar resistance than any other automotive paint coating which means reduced scratching and marring, and better release properties than any other automotive paint coating in use which means less dirt build up between washes. It provides permanent protection for all modern factory paints and can also be used to protect metal and hard plastic surfaces. This is the warranty package for professional installers and includes 2 oz. Opti-Coat Primer. MRP $999.00 The application includes at a minimum, washing, decontamination, polishing with Primer Polish, installation of the coating on all painted surfaces and registration of the warranty. See warranty terms and conditions here: http://opticoat.com/page/warranty-terms
  •  
    • Most versatile product in the detailing industry. Will save money and time.
    • Faster, safer washing
    • Eco-friendly and saves water
    • Extremely concentrated formula that has a variety of uses and dilutions. See below for common dilution ratios.
    • Greater lubricity
    • More gloss and protection than before!
       
  • Opti-Coat® Hyper™ Seal is The Ultimate™ maintenance solution to help prevent bonding of contamination such as hard water deposits, bug splatter and other airborne contamination.  Opti-Coat® Hyper™ Seal creates a super slick surface for easy cleaning in high pollution environments. Use Opti-Coat® Hyper™ Seal on wet surfaces as a drying aid after washing or apply to dry surfaces including paint, plastic moldings, rubber seals and glass.   The new formula is longer lasting and can last a year or more!     Orders in case quantity will be responsible for full cost of shipping and are not eligible for flat fee shipping. We will contact you with the full cost once the order has been placed.  
  • Optimum Power Clean

    $11.99$39.99
    • Extremely versatile product. Can be used on interiors, paint, wheels, tires, and engines.
    • Amazing cleaning power but without harsh chemicals that are harmful to vehicles and people
    • Several dilution ratios making it a cost-effective all-purpose cleaner
  • Optimum Edgeless Premium Pearl Weave Microfiber Towels (16" x 16") are a soft, edgeless microfiber material for final wipe downs, quick detail sprays and application/removal of spray waxes, coatings, etc. As the name suggests, Optimum Edgeless Premium Pearl Weave Microfiber Towels have no stitching around the edges, to create a seamless material with nothing to cause excessive scratches or swirls to the finish. Every Optimum microfiber towel is manufactured using the highest quality material to produce the highest quality results. Made from commercial quality microfiber to withstand years of repeated washing and drying.
  • Optimum Orange Waffle Foam Pad is a great one step cutting pad that can be used with Zentool DA Polisher to remove 2,000 or finer wet sanding marks and deep scratches and swirl marks in one or two passes. The waffle design as well as the breathable backing plate of Zentool DA Polisher keeps the surface cool to avoid burnishing the paint that is caused by over-heating the surface. Directions: To remove 2,000 grit or finer sanding marks spray Optimum Hyper™ Compound on the Optimum Orange Waffle Foam Pad using Zentool DA Polisher at speed of 3-4 or a rotary buffer at 600-1000 RPM. This combination will remove (not hide) scratches after 1-2 passes and leave a finish with minor marring that is free of swirl marks. By reducing the pressure on the pad, you can remove the swirl marks as you are finishing down. Follow up with Optimum Hyper Polish and Optimum Black Waffle Foam Pad to refine the paint surface before applying Optimum Car Wax.
  • Opti-Coat® No Rinse is the fastest, easiest and the most environmentally friendly way to wash any vehicle. Its proprietary polymers bond to the vehicle surfaces and trap dirt to clean without rinsing and leave a very slick and glossy finish that is mar-free. Properly used, you will not scratch the vehicle surface.   Washing with Opti-Coat® No Rinse greatly reduces the discharge of pollutants into storm drains, sewers and ground water. Opti-Coat® No Rinse helps both commercial and individual users comply with the discharge guidelines established by the Clean Water Act and the Environmental Protection Agency.   16 oz. size
  • Optimum Opti-Seal

    $11.99$29.99
    Optimum Opti-Seal is a revolutionary paint sealant that creates unmatched slickness and gloss with just a few drops per vehicle. One ounce completely seals and protects 4-5 cars! This product leaves no residue and requires no buffing. Enjoy months of durable polymer protection with just drops of Opti-Seal. Optimum Opti-Seal is a true paint sealant with no cleaning properties. It seals and protects paint under a crystal clear barrier of cross-linked polymers. Dirt, moisture, oil, and UV radiation are all sealed out of the paint to maintain optimum gloss. It is a spray sealant that provides the durability of traditional sealants in minutes. While it was designed for exterior surfaces, it works equally well for interior leather, vinyl, and fabric/carpet. The science behind Opti-Seal is incredible. The hyper concentrated polymer sealant begins cross-linking as soon as it hits the paint. Opti-Seal flashes almost immediately to leave a polymer film on the paint. Opti-Seal is not a short-cut product. It is a state-of-the-art, stand-alone spray sealant that provides real, durable protection for paint, plastic trim, wheels, glass, and all exterior and interior surfaces (except rubber). This is a last step product, not a maintenance product. After polishing and cleaning, apply Opti-Seal and walk away. Opti-Seal is the only protection your vehicle needs. Opti-Seal is crystal clear in the bottle and on the paint. Applied very thinly, it will not streak or cloud. Simply spray, wipe, and walk away. Opti-Seal leaves absolutely no residue to buff off. Paint protection couldn’t be any easier! Opti-Seal contains no fillers or cleaners. This is a true sealant. If your vehicle has some light imperfections, use Optimum Poli-Seal or Optimum Polish for removing oxidation and any other paint correction. Top the smooth, shiny finish with Opti-Seal for added protection and gloss. Opti-Seal can also be used as a base coat under Optimum Car Wax or any other car wax.
  • Optimum White Waffle Foam Pad is a firm medium cutting pad:
    • Ideal pad to use for soft black paints
    • Designed to be used with the Zentool DA polisher
    • Waffle design and permeable velcro means more air flow and better cooling
      Directions: To remove 2,000 grit or finer sanding marks spray Optimum Hyper™ Compound on the Optimum White Waffle Foam Pad using Zentool DA Polisher at speed of 3-4 or a rotary buffer at 600-1000 RPM. This combination will remove (not hide) scratches after 1-2 passes and leave a finish with minor marring that is free of swirl marks. By reducing the pressure on the pad, you can remove the swirl marks as you are finishing down. Follow up with Optimum Hyper Polish and Optimum Black Waffle Foam Pad to refine the paint surface before applying Optimum Car Wax.    
  • Hyper Wool Foam

    $12.99$23.99
    Optimum Hyper™Wool Foam Pad is the first and only hybrid wool pad of its kind that can be used with a DA polisher to remove 1,000 or finer wet sanding marks. Therefore the combination of Zentool DA Polisher and Optimum Hyper™Wool Foam Pad provides results that could only be achieved by rotary polishers and twisted wool pads in the past! The advantages of Optimum Hyper™Wool Foam Pad with Zentool DA Polisher is a greater cut than rotary buffers with minimal marring and no swirl marks. Directions: To remove 1,000 grit or finer sanding marks spray Optimum Hyper™ Compound on the Optimum Hyper™Wool Foam Pad using Zentool DA Polisher at speed of 3-4 or a rotary buffer at 1200-1400 RPM. This combination will remove (not hide) scratches after 1-2 passes and leave a finish with minor marring that is free of swirl marks. Follow up with Optimum Hyper Polish and Optimum Black Waffle Foam Pad to refine the paint surface before applying Optimum Car Wax.
Go to Top