Opti-Coat RV & Marine is a ceramic clear coating warrantied for up to 5 years with superior resistance to scratching (9H), chemical etching, fading due to UV, and provides outstanding release properties. Opti-Coat RV & Marine pre-polymer cross links and forms a continuous protective film on the painted gel coat surfaces it is applied to, similar to a single component isocyanate that forms a clear coat finish. Opti-Coat RV & Marine has better chemical resistance, scratch & mar resistance, and release properties than any paint coating in use. It provides permanent protection for all modern factory paints and gel coats and can also be used to protect metal and hard plastic surfaces. This is the warranty package for professional installers and includes (1) 30cc syringe of Opti-Coat RV & Marine and (1) 17 oz. Optimum Paint Prep. MRP: $100 per linear ft.  

Opti-Coat RV & Marine Care Guide

WASHING For best results, wash with Opti-Coat No Rinse on a monthly basis at a minimum to avoid excessive contamination build up on the surface. Avoid washing your Boat or RV in direct sunlight if possible. Heated panels will cause drying and possibly leave streaks and water spotting on the surface. If this is not an option, then wash and dry one panel at a time for best results. Wash the cleanest panels first. Leave the dirtiest panels for last to avoid cross contamination. Usually this involves starting from the top panels and followed by the lower ones. DRYING Always dry your RV or Boat completely and never allow it to air dry. Tap water contains minerals. When the water evaporates, these minerals are deposited on the surface creating water spots. As the minerals harden with heat, they can be extremely difficult to remove from the surface.  SPOT REMOVAL OF SURFACE CONTAMINATION Never use abrasive products to polish the coating or to remove surface contamination. Never use excessive rubbing or force to remove spot contamination. Surface contamination such as tar and other contaminants should be removed as soon as possible to avoid temporary staining of the coating and/or hardening on the surface requiring professional removal. For assistance with contamination removal or maintenance standards and techniques, contact your Opti-Coat Marine & RV dealer for professional advice.   MRP: $100.00 per linear foot

Opti-Coat Pro is a ceramic clear coating warrantied for up to 5 years¹ with superior resistance to scratching (9H) which means less scratches over time, chemical etching which means prevents chemical damage to clearcoat , fading due to UV which means the paint system looks vibrant and new, and provides outstanding release properties which means less dirt sticks to the coated surfaces. The Opti-Coat Pro pre-polymer cross links, and forms a continuous protective film on the painted surface it is applied to, similar to a single component isocyanate that forms a clear coat finish with much better properties than the factory clearcoat as described above. Opti-Coat Pro has better chemical resistance than any other automotive paint coating in use which means no damage from the environmental chemicals, better scratch & mar resistance than any other automotive paint coating which means reduced scratching and marring, and better release properties than any other automotive paint coating in use which means less dirt build up between washes. It provides permanent protection for all modern factory paints and can also be used to protect metal and hard plastic surfaces. This is the warranty package for professional installers and includes 2 oz. Opti-Coat Primer. MRP $999.00 The application includes at a minimum, washing, decontamination, polishing with Primer Polish, installation of the coating on all painted surfaces and registration of the warranty. ¹ See warranty terms and conditions here: http://opticoat.com/page/warranty-terms